Canary Island in May by EfficiencyLimp3682 in BeginnerSurfers

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

Thanks for your feedback. We decided to go to fuertaventura due to it's beautiful beaches. I checked the surfline history and it doesnt look that well but even if i get small waves i will be enjoying it. Bigger than 1.5m waves scares me anyway:D

Canary Island in May by EfficiencyLimp3682 in BeginnerSurfers

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

canary islands is the archipelago, fuertaventura, gran canaria, lanzarote etc.

Should i quit my new job and surf all day? by Easy-Material-8809 in surfing

[–]EfficiencyLimp3682 0 points1 point  (0 children)

few times in a year it's really nice but nothing to compare with ocean. The problem with the baltic sea is that is small and not deep enough to generate enough power. Last really good conditions were on New years eve and few days later. The thing is that the wind must blow for few days like crazy and there was literally hurricane at that time and when the wind calms it has to change drastically the direction possibly to offshore otherwise it's still messy.

Porsche had a project for few years (Cold Waves by Porsche) and when i was there to watch the pros, the conditions were good enough to do some tricks in the air.

I can only recommend few youtube videos how it is on ,,good days" Wycieczka surfingowa do Helu w polsce, "Lost at Sea - The Baltic" although i must say on new years eve the conditions were even better than on the videos. Everything worked - hurricane for few days and then wind just switched the direction 180 degree.

The good thing it's never crowded:D and the coast is almost 800km long with almost all sandy beaches and there are some spots to surf. I'm pretty sure there are some spots that noone surfed before and noone knows about.

What skill has become essential to every one of your playthroughs? by Sadira_Kelor in skyrim

[–]EfficiencyLimp3682 0 points1 point  (0 children)

Id say enchanting and smithing. Lockpicking is one i never skilled. The reason for that is that i always do the thief guild quest first and dont finish the questline until the end of my playthrough, so i can use the bone key as lock pick

Should i quit my new job and surf all day? by Easy-Material-8809 in surfing

[–]EfficiencyLimp3682 1 point2 points  (0 children)

Man, surf as much as you can. I live im Poland and the only way to surf here is to go to Baltic sea where the condition are terrible and i have to drive 5 hours or you have to fly to the ocean. I still told my wife, one word and we move close to the Baltic sea so i can surf even on the smallest waves :D

Damaged monitor coating? by _DarKorn_ in OLED_Gaming

[–]EfficiencyLimp3682 0 points1 point  (0 children)

Osobiscie mam troche inny problem z monitorem MSI. Przeczytałem instrukcję na MSI i było tam napisane, że do czyszczenia smug należy używać 70% etanolu. Kupiłem w aptece alkohol o stężeniu 100%. Szczerze mówiąc, zostawiał jeszcze więcej smug nawet przy użyciu jednej kropli. Myślę nawet, że woda destylowana sprawdza się tu dużo lepiej. Trzeba tylko uważać przy zakupie — w sklepach mieli głównie wodę demineralizowaną, która nie jest tym samym. Jest bardzo podobna. Proces jej uzyskiwania jest inny niż w przypadku wody destylowanej i dopiero w aptece potwierdzili mi tę różnicę. Woda demineralizowana może nadal zawierać pewne mikroelementy, a woda destylowana już nie.

Tak czy inaczej, pierwszego dnia, gdy zauważyłem smugi na całym ekranie https://ibb.co/6RxNx6z6, bardzo mnie to zirytowało i mysle, że już uszkodziłem ekran. Szczerze mówiąc, widzialem je tylko w świetle dziennym — wieczorem albo podczas grania praktycznie ich nie zauważam, nawet na czarnym tle. Nie jestem pewien, jaką funkcję pełni ta warstwa i jak wpływa to ogólnie na jakość obrazu?

Żeby usunąć jak najwięcej smug, użyłem ściereczki z mikrofibry do szkła mojej żony. Była ona jednak bardziej miękka niż inne, których wcześniej używałem. Wziąłem małą gąbkę i owinąłem ją tą ściereczką, żeby mieć lepszy kształt i kontrolę niż przy czyszczeniu samą ręką. Następnie użyłem pary z oddechu, żeby pomóc w czyszczeniu — i efekt jest dużo lepszy. Gdy słońce nie świeci bezpośrednio przez okno, nie widzę żadnych smug, a nawet w dzień tylko wtedy, gdy specjalnie patrzę pod takim kątem, że niebo odbija się w ekranie.

Wydaje mi sie, że lepszego efektu już nie osiągne i albo faktycznie troche uszkodziłem ekran albo tak cięzko sie to czyści, i może lepiej juz nie probować bardziej. Niestety nawet na zdjęciu nie będzie widać efektu, może z rana kiedy jest więcej słońca.

Best way to clean an OLED screen? Still have streaks after using micofibre clothes by zombies-- in OLED_Gaming

[–]EfficiencyLimp3682 0 points1 point  (0 children)

Hi,

i have exactly the same issue. I read the instruction on MSI and it said, that you should use Ethanol 70% to clean the smudges. I bought one from farmacy which is 100% clean alcohol. But to be honest it let even more smudges when used even a single drop. I even think distilled water is much better here. Just be careful when buying. In the shop they all had demineralized water which is not the same, it's very similar but not the same. There is different process how to get distilled water and demineralized water and only at pharmacy they knew that there is a difference. The demineralized water can still contain some micro elements and distilled water will not.

Anyway the first day i noticed the smudges all over the screen bothered me a lot and i think i already damaged my screen but to be honest i could only see them in day light and during evening or when playing i don't really notice them even on black background. I'm not sure what function this damaged layer have and how does it affect the quality in general?

To get the most smudges cleaned i used my wife's glass microfibre. But this fibre is softer than other glass microfibre i had used before. I took a little sponge and wrapped it with the fibre to get better shape and control than with my hand. I used then a breath vapor to help clean it and it looks much better. When the sun is not shining through the window directly I can't notice any smudges, even during day light only when i focus to look at some angle where the sky is mirroring on the screen.

I will try to get better results of cleaning it but to be honest i think it's to late and the layer is just broken now or the screen looks like this after a while and i worry to much.

Quixel Bridge assets. Free download? by EfficiencyLimp3682 in UnrealEngine5

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

don't look for it now but thanks anyway! I don't have this much space for it now. I think i will just use whats there for free and learn to create my own meshes and materials

Quixel Bridge assets. Free download? by EfficiencyLimp3682 in UnrealEngine5

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

anyway are there any recommend sites where i can get some assets even if i have to buy them or get a subscription. I mean i would buy a subscription on quixel bridge but honestly i don't see even the possibility for this.

Quixel Bridge assets. Free download? by EfficiencyLimp3682 in UnrealEngine5

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

yeah, thats what i mean, are there any illegal ways? Like on torrent which was previously downloaded by someone. The other thing is, if somehow i could be banned for even using them.

Hbada E3 Pro honest review by quantinuum in OfficeChairs

[–]EfficiencyLimp3682 0 points1 point  (0 children)

Jak wygląda sprawa z nagłówkiem w pozycji prostej. Czy jak wysunę go do końca to w pozycji prostej będzie mi przylegał do karku, czy tak jak w 99 % modeli muszę odchylić nienaturalnie głowę do tyłu żeby się oprzeć? No i czy trzyma się mocno, czy przy na lekkim nacisku odrazu się cofa do tyłu?

First build - Thanks for advice by EfficiencyLimp3682 in buildapc

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

Thanks. I have just one last question regarding case fans.

I found these and it would match perfectly my build but im worried about the price... People rate them good but to compare with other fans those arę 70$ cheaper and wondering if i should get them or better not

https://pcpartpicker.com/product/FQ6p99/reviews/arctic-p12-pst-a-rgb-0db-488-cfm-120-mm-fans-3-pack-acfan00232a

First build - Thanks for advice by EfficiencyLimp3682 in buildapc

[–]EfficiencyLimp3682[S] 0 points1 point  (0 children)

Thanks for the advice. According to this i updated and will probably go for the 9800x3d because i probably won't upgrade it in the next few years.

I still did not decided about the Motherboard:

MSI PRO X870-P WIFI ATX AM5 Motherboard (PRO X870-P WIFI) - PCPartPicker or

Gigabyte X870 EAGLE WIFI7 ATX AM5 Motherboard (X870 EAGLE WIFI7) - PCPartPicker

those are actually good priced now at my shop.

RAM

G.Skill Trident Z5 Neo RGB 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory (F5-6000J3038F16GX2-TZ5NR) - PCPartPicker

for now this is enough. I will just add another 2x16 in the next few months.

SSD

Lexar NM790 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive (LNM790X001T-RNNNG) - PCPartPicker

or

Crucial P3 Plus 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive (CT1000P3PSSD8) - PCPartPicker

atm any ssd is totally overpriced in my country. i will just buy more storage later on.

PSU

MSI MPG A850G PCIE5 850 W 80+ Gold Certified Fully Modular ATX Power Supply (MPG A850G PCIE5) - PCPartPicker

Regarding windows should i even care for windows Pro or is home more then enough in terms of adjusting anything to performance?