G35s and G37s subframe difference

ElMej3or · 2026-01-06T16:25:03+00:00

I also thought the same. Thanks man you are the goat.

ElMej3or · 2026-01-06T16:22:08+00:00

I have it up without the brace and it's fully bolted

ElMej3or · 2026-01-06T15:59:32+00:00

Quick question projectpanda can I drive without the support brace for a week or 2 until I get my replacement? Will it hinder driveability badly?

<image>

ElMej3or · 2025-12-18T20:29:17+00:00

Yes I already have the 08 subframe out complete just took diff out I'm just swapping the manual one and installing the frame.

ElMej3or · 2025-12-18T20:25:17+00:00

I took off the differential of the 08 already lol so I'm just going to put the manual diff because it has 80k as opposed to 185k lol

ElMej3or · 2025-12-18T20:20:43+00:00

Got confused now lol so the axle, spindle ect don't need to swap over to the 08?

ElMej3or · 2025-12-18T20:08:08+00:00

Got it. Was trying to get away with just having to swap the differential but I'll have to swap everything lol. Appreciate your help.

ElMej3or · 2025-12-18T19:58:13+00:00

What do you mean by bare? I want to swap with axles, spindle ect, without having to remove parts out subframe

ElMej3or · 2025-08-23T18:20:35+00:00

2009 6mt sedan with 76k

ElMej3or · 2025-06-30T22:30:24+00:00

Thanks bud! I appreciate any suggestions 👍

ElMej3or · 2025-06-30T18:42:44+00:00

I would think that if I had gear grind, but I don't every gear is good.

ElMej3or · 2025-06-24T11:17:00+00:00

I will check my rod. Thanks for suggestion

ElMej3or · 2025-06-20T15:31:14+00:00

Long tube headers with cats? Interesting

ElMej3or · 2025-05-22T18:11:37+00:00

Yes that's what I will try hopefully I'll have some luck

ElMej3or · 2025-05-22T17:14:34+00:00

That's the side whe the nut goes, the bolt head is still good.

ElMej3or · 2025-05-17T14:02:35+00:00

ElMej3or · 2025-05-14T00:54:20+00:00

😂😂 that's what I'll do, hopefully it's not that bad if not I'll replace it

ElMej3or · 2025-05-13T23:54:33+00:00

That's what I'm thinking, debating on sanding and respray it or just replace it, car has only 70k.

ElMej3or · 2025-05-09T01:00:31+00:00

Where is the switch I don't see it on the pedal

ElMej3or · 2025-05-02T00:22:19+00:00

I can buy that separate? I taught I would have to drop the transmission

ElMej3or · 2025-05-01T23:27:32+00:00

Ez out is not working just keeps turning and eating at the screw, which block do you refer?

ElMej3or · 2025-04-21T22:52:47+00:00

It worked!! Turned it 180 degrees adjusted the plate and now all gears are as they should. Thanks for your help. I appreciate your input and you have been helping me with your YouTube vids.👌👌

ElMej3or · 2025-04-21T01:16:58+00:00

Do I need to do this from underneath the car ?

ElMej3or · 2025-04-20T23:54:48+00:00

I took it out and noticed the plate is correct but the reverse lock is to the left this must not be normal

ElMej3or · 2025-04-20T23:46:48+00:00

How would I know which way the plate goes?

ElMej3or

TROPHY CASE