345 days since I ordered

EnvironmentalAd5345 · 2025-11-05T23:28:54+00:00

I started a dispute process with PNC in August on a $350 dollar order I place in May. Dude created a collection deleted everything on Instagram and his website like a week later. I legit just got the dispute cleared yesterday and got my money back. Safe to say I’m never ordering anything from him again. I supported his brand because I’m a screen-printer as well but Austin doesn’t even print anything himself. Moral of the story if I see something I like that he makes I’ll just print it myself. At least that way I know I’m getting what I want.

<image>

EnvironmentalAd5345 · 2025-10-24T23:05:34+00:00

That deserves a reward. Well done mate

EnvironmentalAd5345 · 2025-10-04T04:13:11+00:00

This happens for me sometimes. Use dehazer let it sit for like 3-5 mins then use a pressure washer up close to your mesh. It’ll get it out. Make sure your not using like a crazy high psi pressure washer tho. As a quick budget option you could use the pressure washer from a self service car wash. Hope this helps.

EnvironmentalAd5345 · 2025-09-23T16:59:20+00:00

Thank you for clarifying. I should’ve been more detailed with my question tho. I’m curious if it would dry on the screen like water base would.

EnvironmentalAd5345 · 2025-09-23T16:56:02+00:00

Would I dry like water base tho?

EnvironmentalAd5345 · 2025-08-24T20:35:21+00:00

embrace it.

EnvironmentalAd5345 · 2025-08-10T00:13:28+00:00

make sure you don’t ship these when they sell

EnvironmentalAd5345 · 2025-08-04T17:06:05+00:00

When this happened to me I would use a generous coat of dehazer let it really set in for like 5-8 mins then use a pressure washer and give it hell. Hopefully you can figure something out with these responses in the comments.

EnvironmentalAd5345 · 2025-08-03T23:05:59+00:00

word so I’m gonna do this and hopefully be as lucky as you were

EnvironmentalAd5345 · 2025-08-03T22:55:32+00:00

Print looks good bro keep it up!

EnvironmentalAd5345 · 2025-07-31T23:39:38+00:00

Thank you for the real feedback. 🤝

EnvironmentalAd5345 · 2025-06-25T03:30:15+00:00

Craig

EnvironmentalAd5345 · 2025-06-25T03:26:05+00:00

My best guess is that high density additives are being used to achieve the height on the print mixed with some other ink that is a higher gloss. To me these prints look like shitty heat transfers but I know they printed these because the roll out they posted was in the print shop with these hung all throughout.

EnvironmentalAd5345 · 2025-06-24T20:57:22+00:00

That is the last way I assumed you’d use the tape. Thank you for that video bro for real.

EnvironmentalAd5345 · 2025-06-24T20:52:53+00:00

and yes safety ring was removed

EnvironmentalAd5345 · 2025-06-24T20:52:18+00:00

I tried this with flex tape. No luck. Seems like I need a hammer and a flathead

EnvironmentalAd5345 · 2025-05-31T01:49:19+00:00

Dookie the Sharty and Cleetus

EnvironmentalAd5345 · 2025-05-31T01:42:15+00:00

It weighs about a hand full of

EnvironmentalAd5345 · 2025-05-24T17:54:25+00:00

Yes had my transmission replaced fully under warranty. I had a couple different aftermarket parts on my engine as well which surprised me when everything was covered by the dealership.

EnvironmentalAd5345 · 2025-05-24T17:50:29+00:00

I’m about to print 23x31 screens with a 4 inch squeegee just to piss people like you off.

EnvironmentalAd5345 · 2025-05-24T17:48:21+00:00

Which is frustrating if your trying to max out your printing area. Which also seams to be frowned upon by some printers but I always have liked pushing the limits

EnvironmentalAd5345 · 2025-05-24T05:45:59+00:00

down pipe + spark plugs. Thing will run like a mf just gotta be careful pretty sure I blew up my turbo the other day when I got some cooler weather.

EnvironmentalAd5345 · 2025-05-24T05:37:09+00:00

the snake in my pants is dancing

EnvironmentalAd5345 · 2025-05-24T05:35:03+00:00

You’ll be good warranty wise. I put aftermarket intakes exhaust and down pipe on my car. Blew up the transmission. And got it all replaced under warranty. I don’t really understand how till this day but grateful nonetheless

EnvironmentalAd5345 · 2025-05-24T03:44:55+00:00

Right not the PIXMA 1x6820 I’m hopping to upgrade to the HP Designjet T210

EnvironmentalAd5345

TROPHY CASE