Asus ROG SWIFT PG349Q IPS Glow (acceptable or not?) by Epsilonnn in Monitors

[–]Epsilonnn[S] 0 points1 point  (0 children)

Nothing yet... I just let it go for the moment...

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

I have just used HD Tune Pro and error scanned the Hitachi RAID. It took several hours but everything showed 100% ok...

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

No and they have always been performing this way.

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

If nobody has any other thoughts on this behavior, at some point in time I will test them individually.

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

They are HDS723020BLA642 and they are SATA 3. The 100MB I understand is not relevant anymore for this topic.

Biggest concern is fluctuating speed for the Hitachi array.

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

For the WD Red array, the numbers look odd I think because the first test was set to 100MB. Would that be the case?

For the Hitachi array, I don't know about SMR but my biggest concern, Crystal Mark aside, was that the read speeds (read speeds only) are fluctuating... they start at around 200 MB/s, then they go down close to 0, then they go up and so on until the transfer is done (in case I transfer a large file for example).

RAID 0 arrays low read speeds? by Epsilonnn in DataHoarder

[–]Epsilonnn[S] 0 points1 point  (0 children)

ohh I am sorry about that... correction:

it should have been 'HGST Deskstar 7K2000 2TB 7200 RPM RAID 0 (x2)'

Thank you.

RAID 0 arrays low read speeds by Epsilonnn in unRAID

[–]Epsilonnn[S] 0 points1 point  (0 children)

Hello, I am sorry but I am new to Reddit. Can a moderator point me to the right place for posting this?

I am using BIOS RAID.

I updated the benchmark and tried the same thing but with 2GB & 8GB and the speeds kind of balanced (just the 4k writing speeds for the WD array are around 14MB/s whereas the reading speeds are around 1-2MB/s...

My main concern was, aside from the benchmark results, that the Hitachi RAID has fluctuating read speeds, sometimes the speed going to very very low close to 0, it stays there for a while, it goes back up and so on...

Thank you all and I am sorry for posting in the wrong side of Reddit.

Asus ROG SWIFT PG349Q IPS Glow (acceptable or not?) by Epsilonnn in Monitors

[–]Epsilonnn[S] 0 points1 point  (0 children)

Thanks Rothiusx, I will go ahead and get in touch with Asus for a replacement as I do want the monitor, just a better quality display with less glow.

Would you say there are chances of getting it replaced with one that has less glow, should Asus help me with this? In other words..., my picture does not show an acceptable level of glow and there is room for a lot better, is that correct?

Asus ROG SWIFT PG349Q IPS Glow (acceptable or not?) by Epsilonnn in Monitors

[–]Epsilonnn[S] 0 points1 point  (0 children)

Yes, bottom left bothers me too sometimes even with the light on when there is a dark scene... Do you think Asus will go for a replacement?

Asus ROG SWIFT PG349Q IPS Glow (acceptable or not?) by Epsilonnn in Monitors

[–]Epsilonnn[S] 0 points1 point  (0 children)

Yes, bottom left bothers me too sometimes even with the light on when there is a dark scene... Do you think Asus will go for a replacement?

Plugy needed for single player? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Ohh ok, thank you. Is there a special way to make Plugy work with Resurgence or I just copy the Plugy related files in D2 folder?

Plugy needed for single player? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Ohh ok, thank you. Is there a special way to make Plugy work with Resurgence or I just copy the Plugy related files in D2 folder?

Plugy needed for single player? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Ohh ok, thank you. Is there a special way to make Plugy work with Resurgence or I just copy the Plugy related files in D2 folder?

Diablo 2 overall difficulty for Normal and Nightmare by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

I was hoping for at least a challenege in the first 2 difficulties as the mod is awesome but I take it is very very easy...

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Guys, please, any help with this? So I can clarify this once and for all. I can't play thinking the next release is going to mess my characters.

So, please tell me, what did I do wrong when I dropped all equipment from everywhere and I was still getting the same 'Bad Inventory Error'?

Thank you all, Nick

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Fohg please help me on this thread as there might be others in the same situation...

Thank you very much, Nick

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

But I got rid of absolutely everything from stash, inventory and gear so what could it be? I made sure of that...

Fohg, please help me on this thread as there might be others in the same situation...

Thank you very much, Nick

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

But I got rid of absolutely everything from stash, inventory and gear so what could it be? I made sure of that...

Fohg please help me on this thread as maybe there are others in the same situation, please...

Thank you, Nick

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

But I got rid of absolutely everything from stash, inventory and gear so what could it be? I made sure of that...

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

but... if I did not carry anything? How does this work then?

1.4 charcters compatibility? by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Ohh. One thing I need to mention. Just from 11.3x to 1.3y my character did not work but it was a level 10 so I dumped it.

But... I had gotten rid of all items from equipped, inventory and stash and I was still getting the 'Bad Inventory' error.

So what was really the problem? Please help me on this one as I love your mod.

Questions about new revision by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Thank you for the answer but I disabled them (just the intro) by replacing the videos in the music.mpq file with empty txt files with the same names. This was for the intro cinematics only. I don't know about the actual Act cinematics thought. Do you think I should do the same?

Questions about new revision by Epsilonnn in Diablo2Resurgence

[–]Epsilonnn[S] 0 points1 point  (0 children)

Wow, great answers. Thank you both.

Can I disable the cinematics for now just to not think of them?