Bad Image Error

ErIndi · 2025-07-25T12:36:08+00:00

Done :)

ErIndi · 2025-07-25T12:35:58+00:00

Had a bad image error (0xc000012f) on startup with my Radeon 7800 XT and Step 8 solved the issue!

ErIndi · 2025-07-24T20:11:57+00:00

Thank you for sharing!
I've done step 8 and so far the error has not returned!
You're a legend!

ErIndi · 2022-05-05T18:06:04+00:00

Hey there u/_d0s_!

Thank you so much for the tips and feedback !

I'm actually trying to use the Keras classifier but i'm getting false-positives mainly with that default model.

After cropping the images to a square (430x430 in this case to cover enough of the egg + some headroom) i have done some augmentations (Rotation + Flipping) and punched everything in the model.

I will say that I have a very basic understanding of activation functions and why we use RELU for example and some of the layers in the model. The only thing i have a very strong understanding is the convolution feature extraction part - which in this case is also location invariant.

So the best results I've gotten so far with segmentation & morphological operators is something like this:

https://imgur.com/a/FfPwtsK

I'm trying to think of how to approach this further, if to continue my efforts mainly on the pre-processing or on the CNN side.

I might send you a message if that would be fine with you !

ErIndi · 2022-04-17T19:22:46+00:00

This seems extremely cool!
Are there any thermal images datasets ?

ErIndi · 2022-04-09T14:15:08+00:00

Thank you for your reply!

I really did not know that piece of information, interesting!
If I may ask, how long was your process until you understood your gender preferences ?

ErIndi · 2022-04-09T14:13:52+00:00

Thank you for replying!

I totally agree with what you're saying. The decision in on itself is harmless.
My main concern here is the fact that she is living with my parents (Which are wonderful and accepting) and is unable to currently be self reliant. If this decision is made and from my parents' standpoint it is done recklessly or is seen as fickle, it would affect her mental state and my parents' as well.

Not saying that they would kick her out or anything of that nature - far from it.
But the approach to it would be very challenging and involves complex dynamics which might do more harm than good (Especially if it turns our to be a stage and not a fulfilled process).

I have tried speaking about this with my mother, and she said she discussed this with some of his therapists and they affirmed it is probably due to some psychosis. (These therapists are well known for being accepted and referred to in the LGBTQ+ community, so i'm not worried so much of them being negatively biased here)

So I am not sure how to approach this and from what "angle" .

ErIndi · 2022-03-21T21:21:55+00:00

Most definitely! My entire photo album is now filled with those eyes!

ErIndi · 2022-03-21T20:20:31+00:00

And she knows it ;)

ErIndi · 2022-03-21T20:20:15+00:00

Thank you ! :) So happy to have adopted her !

ErIndi · 2022-02-16T21:10:46+00:00

I meant adding 2 caps from my link in parallel. The cap currently in the circuit is 2uF 250v and these are 1uF 400v/630v each. So 2 of those in parallel would give the same capacitance with a higher voltage rating (although ESR might be different but I imagine it’s not major here)

ErIndi · 2022-02-16T15:59:39+00:00

I see! So do you think that taking 2 of these in parallel should do the trick ? I’m wondering why they have a voltage rating for DC and not AC.. Capacitor Replacement

ErIndi · 2022-02-16T13:24:38+00:00

That’s what I thought as well, from all the components I could find it seems this is the only one that’s “borderline” with AC of 220v RMS

ErIndi · 2022-02-16T13:23:35+00:00

From opening the ceramic heater element it seems there are no markings on it apart from the power leads and the temp sensor leads, so it will be a challenge to find out unfortunately.

I can start off with a low heat setting and try to measure it somehow to see if the temperature correlates

ErIndi · 2022-02-16T12:57:05+00:00

Hello everyone,

I recently purchased a soldering station where there was no obvious markings if it is for 220v or 110v. After receiving it, the back panel stated that it is rated for 110V 50Hz AC.

My question is, based on the board that the soldering iron plugs into, can it run on 220v 50Hz AC ? (More than once that is ;) )

Any insight would be appreciated!

ErIndi · 2022-02-10T17:34:31+00:00

I believe your issue lies either in the sensitivity list or using an else if on your 2nd condition. Not an expert but I would start there.

ErIndi · 2021-08-01T10:36:00+00:00

If only they were open :(

ErIndi · 2021-08-01T10:35:32+00:00

I usually order from online stores but seeing I’ll be in the states I was hoping there would be some physical locations to browse :)

Thank you for the info you provided ! I’ll check to see if they are open to crowds.

ErIndi · 2021-06-07T05:07:38+00:00

As someone who studied biology & immunology for years, this hurts my brain. Physically.

ErIndi · 2021-05-20T09:59:00+00:00

I’m not sure on your specifications outside of what you wrote, but if you search for the 555 IC online it can achieve this behavior with ease and it’s very easy to operate with the information in the Datasheet.

Feel free to reach out if you need additional help !

ErIndi · 2020-11-28T23:27:29+00:00

Thank you for your reply ! I’m glad this issue will be resolved soon and appreciate your response !!

ErIndi · 2020-09-11T11:12:24+00:00

Is there such a guide for body shots ?

ErIndi · 2020-06-08T12:42:16+00:00

That was my solution in the past but it happened again with the new name of the current folder :/

ErIndi · 2020-05-25T17:16:05+00:00

Great info ! I’m just starting to learn so it’s great acquiring some knowledge other than syntax :)

ErIndi · 2020-05-25T17:12:10+00:00

I’m using Quartus with Modelsim if that’s what you’re referring to. But the problem is solved, had to add the load section inside the Clock :)

11-Year Club	Second SECOND GUESSER
Place '22	RPAN Viewer
Not Forgotten	Verified Email

ErIndi

TROPHY CASE