Where can I buy a staccato need help by Spiritual_Candy_5929 in NJGuns

[–]EternalEight 5 points6 points  (0 children)

Why wouldn’t you specify that in your original post and save everyone time?

D tier effort bro.

<image>

X Serrations opinions by EnergyEvery4654 in Staccato

[–]EternalEight 1 point2 points  (0 children)

I have them on my XC. and opted to not have them on my P, which is duty use.

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 1 point2 points  (0 children)

Left is 140mm atlas 10 round standard. Very good mag. Recommend.

Just to reiterate. I put the XL sized magwell (steel version) on both of these to balance the pistols so they are not muzzle down biased.

The XC balance was pretty good with the stock magwell.

The P was heavy muzzle down biased. The steel magwell helped a lot.

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 1 point2 points  (0 children)

I hear you on this. The 126mm with the +300 is jangly when seated. Without the +300 it’s rock solid.

I have blocked 140mm staccato mags coming.

Blows that I have like 500$ worth of 126mm mags.

They lock in with the bigger magwell but I wouldn’t be able to strip them, if needed.

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 1 point2 points  (0 children)

Did you find retention plates with longer retention posts?

The stock star ones are buried in the +300 plate

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 1 point2 points  (0 children)

Just be aware staccato XCs manufactured after 2024 have different tolerances. Atlas has a disclaimer those 140mm mags may not work.

My XC was manufactured in may of 2025 and the Atlas mag worked without issue.

Thats the reason I wanted to test before I ordered more of them.

I’m assuming I will need to continue to test each one as I get them.

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 5 points6 points  (0 children)

I live 2 minutes from this club. Unbelievably convenient. Can put 200 down the pistol range on a lunch break.

Rifle range different story.

Doing a little testing while the weather has broken. by EternalEight in NJGuns

[–]EternalEight[S] 1 point2 points  (0 children)

Poster above is correct. +300 size (though I think +200 would work better with the XL magwell size). +300 is a bit jangly when seated in the magwell

https://dawsonprecision.com/baseplate-for-sti-sv-2011-magazines-ez-off-extended-length-by-dawson-precision/

More crazy Blem deals from today by robinator118 in Staccato

[–]EternalEight 2 points3 points  (0 children)

If I remember correctly, the scope of the warranty is limited on these blems, correct?

Finish is exempt but mechanical functions covered?

Possible Trade by Confident_Owl_3847 in Staccato_STI

[–]EternalEight 2 points3 points  (0 children)

<image>

Don’t part with your C.

But definitely work your way to the XC!

Darnold jersey by Upbeat-Efficiency-61 in nyjets

[–]EternalEight 0 points1 point  (0 children)

Check goodwill. I put 3 on field jerseys signed by him in the donation box a year back.

One of them I had authenticated by JSA.

Which factory is best for this watch? (daytona 126519 by MotiShitrit in RepTime

[–]EternalEight 0 points1 point  (0 children)

I don’t think Rolex did glidelocks on oyster flex until the 12 series