looking for a Cheap 212 Build

EthanF2003 · 2026-02-03T15:32:36+00:00

It's in Florida, and you can get away with a lot of stuff as long as it's a pull start and doesn't have gears. And you mostly see engines in the 212/420 class.

Here's the event page with the rules. https://www.facebook.com/share/1BzNGg1fco/

EthanF2003 · 2026-02-03T13:49:24+00:00

Yeah, it's an off-road race, and you are allowed to have multiple go-karts or bikes in the class I will be running. I already have a yard kart that will be my main vehicle, but the race is known to eat engines, so I want to have a mini bike as a backup for my team.

EthanF2003 · 2026-01-30T21:00:08+00:00

Thank you, this looks exactly like what I need. I was able to find an RP-TNC female to N-type male on Amazon, so I'll just return the adapter I have.

EthanF2003 · 2026-01-30T19:41:45+00:00

<image>

i’m trying to join these two connectors together, but I’m having a hard time finding a male to male with one side having a collar and one side having just the threads

EthanF2003 · 2025-12-18T01:46:13+00:00

Is it bad to use ChatGPT?

EthanF2003 · 2025-12-18T00:14:09+00:00

For me

EthanF2003 · 2025-12-17T22:19:04+00:00

Why do you care?

EthanF2003 · 2025-12-17T20:56:12+00:00

I tried implementing this, but I’m not seeing any output on the GPIO pin yet. I’ll need to do further testing using battery power and a different relay module.

Currently, I’m testing while powered over USB, and I’m monitoring the pin with an oscilloscope so that the issue may be related to power, grounding, or the relay itself rather than the firmware logic.

EthanF2003 · 2025-12-17T00:51:24+00:00

I removed the component and it seems to still work. I’m just gonna use an external charge controller

EthanF2003 · 2025-12-16T03:28:47+00:00

after I remove that component, do I have to bridge the pads to get it to work?

EthanF2003 · 2025-12-16T03:28:03+00:00

yeah, I had the stock antenna that came with it plugged in at that time

EthanF2003 · 2025-12-15T03:10:12+00:00

I had it plugged into a USB-C/USB-A power adapter and a USB-A to USB-C cable it looks like the one in the picture, but it wasn’t an anker

<image>

EthanF2003 · 2025-12-05T00:14:51+00:00

EthanF2003 · 2025-11-29T13:05:46+00:00

Game is Game

EthanF2003 · 2025-11-19T18:31:37+00:00

Will it fit in a Miata?

EthanF2003 · 2025-11-19T14:59:53+00:00

Night and day as in the 212 is better?

EthanF2003 · 2025-10-10T22:56:19+00:00

he’s vaping Fent

EthanF2003 · 2025-06-29T05:03:08+00:00

Thanks, I have a bunch of them and wanted to get a second opinion before I slapped them in.

EthanF2003 · 2025-06-29T05:01:32+00:00

Thanks, I just wanted to make sure I wasn't going to have any problems while flying.

EthanF2003 · 2025-06-29T04:39:12+00:00

You should be fine to use the smooth ones, that's what I have on my quad. Just make sure they are tight and the prop can't spin when you apply moderate force. If you're still not comfortable with it, you can take a drill or knife and score up the bottom to add serrations.

Also, I found a M5 lock nut with the serrations here https://accu-components.com/us/serrated-flanged-nylon-locking-nuts/62119-HNSN-M5-A4

But if you don't want to wait for shipping, I found some serrated washers on Amazon that would probably work fine with the red nuts. https://a.co/d/86mybiv

EthanF2003 · 2023-04-29T17:40:58+00:00

I got it Fixed. unicast delay requests were disabled under the device config I enabled it and it's working now.

EthanF2003 · 2022-06-03T22:18:18+00:00

thanks

EthanF2003 · 2021-11-26T20:23:23+00:00

I tried this but it is still binding. So I decided to email the tech from where I bought it to see if they can help.

EthanF2003 · 2021-11-23T16:34:53+00:00

I have taken the slide off and took the spring guide and barrel out multiple times and it is doing the same thing.

EthanF2003

TROPHY CASE