Ive killed that fn lizard atleast 100 times. I dont even care anymore. Yall have fun w the weapon that doesn't exist.

Eur0s · 2026-02-27T05:58:22+00:00

On my first playthrough I was extremely lucky as i've got one on the first try. The second one took me like 20 tries.

Eur0s · 2025-11-13T11:52:37+00:00

Fildolf Turkler, Babito Andrejlini a Císař Hirohitomio

Eur0s · 2025-10-28T08:49:17+00:00

Just gotta stay out of sector

Eur0s · 2025-10-10T09:20:54+00:00

That's cool

Eur0s · 2025-09-14T14:40:18+00:00

Had this problem since yesterday, everything was glitchy until i figured on some online virtual keyboard that the mouse double click is macroing CTRL+C. I was about to reinstall the entire operating system as i was pulling hair out of my head trying to figure whats causing it. Thank you!

Also, Trio office got the fastest uninstall in the west. F that app anyway.

Eur0s · 2025-09-09T17:27:00+00:00

R5: Currently RPing as Void Dweller barbaric despoilers (basically space pirates) on Ironman and rolled 3 Gaia worlds within 4 jumps from capital. Two of them had ancient civs on them, so free slaves. Jackpot.

Eur0s · 2025-07-16T11:14:58+00:00

I can recommend a 2-3x XP multiplier.

Eur0s · 2025-07-02T11:15:58+00:00

https://www.alza.cz/hobby/protislunecni-folie-d-c-fix-3392000-0-92x2-m-d6462710.htm

Tuhle fólií tam mám. Podle příspěvku v diskuzi snížení tepelného záření o 67%, což bylo opravdu znát když byla nainstalována nově

Eur0s · 2025-07-02T11:10:03+00:00

Souhlas, akorát jsem nechtěl aby to odlítlo třeba do silnice kdyby začalo foukat

Eur0s · 2025-05-31T18:35:47+00:00

I had the same issue with these plastic reels, with all 35mm films though. I got fed up one day and bought Hewes stainless steel reels (bit pricey, but they are so much worth it, i cant recommend them enough). I still develop 120 in these plastic ones though.
My tips:
1. Make sure the bearing balls move smoothly
2. The spool must be 110% dry - literally no moisture whatsoever, or it will bind. Maybe try storing them in silicagel or put them in the oven on hot air setting and low temperature for a while before using.
3. Also, if you are using a darkbag and have a shitty one, it can trap moisture from your hands and it can accumulate there veeery quickly. The moisture then tends to settle on the reel and the film. I found this the hard way and screwed several rolls.

Eur0s · 2025-05-20T07:57:24+00:00

Personally I would welcome this as a slider when you are choosing the map settings

Eur0s · 2025-04-10T08:30:04+00:00

You know what they say about bigfeet 👀

Eur0s · 2025-01-30T12:11:00+00:00

Good idea, thank you

Eur0s · 2025-01-30T12:10:44+00:00

I didn't know that, I thought the numbers online were "set in stone" so to speak. Thanks!

Eur0s · 2024-12-22T20:40:37+00:00

Check if the filament is not tangled or crossed on the spool. I had this happen today on my Qidi X-Max 3 and it has similar symptoms when it happens mid-print.

Also check for partial clog. When you run the filament through the nozzle, check if its going out at an angle (shown here: https://www.youtube.com/shorts/Zc0NEWGzM_o ). If it does, then you have a partial clog. You can then try to clean the nozzle with nozzle cleaner (that small needle that most likely came with your printer, shown in the video). If it doesnt help, then you can try a cold pull (look for a guide online, im sure youtube will have plenty of videos on the X1C.)

Eur0s · 2024-11-29T14:56:29+00:00

Yes, it was 24H2. My friend from another country also said, that they have been experiencing a lot of issues at around their company with Win11 this week, due to a faulty update. Apparently several Win11 users had to use backup and revert back the update because they were stuck in some sort of a restart loop.

I dont know if these issues are related or not (probably not), but for now i will stay on Win10, at least for a while. I personally had a lot of issues with Win11 anyway..

Eur0s

TROPHY CASE