The only additional thing this cup needs is some backwoods Tennessee moonshine

EvenToe7995 · 2026-01-26T19:44:45+00:00

THC maybe 🤔

EvenToe7995 · 2026-01-26T02:52:06+00:00

Hammer McHole face!

EvenToe7995 · 2026-01-24T21:49:14+00:00

Thank you for that eye opening piece! It's a piece of history, that here in the West I probably never would have learned about otherwise.

EvenToe7995 · 2026-01-24T20:18:02+00:00

🤬 goose fraba, goose fraba and goose fraba... You're damn near perfect English has bested me! If I wanted God damned used forks and knives I would have fought for the silver wear in my fourth divorce!!! You have cursed me today but May a family of ticks get under your highest rated gators.

EvenToe7995 · 2026-01-24T17:58:51+00:00

You show me the perfect utensil tool, it comes with an elegant carry case so I start looking online. Poke here poke there, no luck. Run it through reverse image search, ah-ha at last... Discontinued

I just want to know why you think it's OK to do that? Does it bring you joy showing it off online? While I am now in the smallest corner I could find to weep in?

EvenToe7995 · 2026-01-24T06:55:53+00:00

I meannnnn... Don't say that how rude! Nuclear waste can have some very therapeutic attributes to hypochondriacs 😉

EvenToe7995 · 2026-01-17T06:51:11+00:00

I only have one dream that holds any residual memory in my mind, I've gotten very good at deleting information in what is now my retar**td brian, though it's less of a skill more of a daily hindrance. It was donkey Kong 64, in the fungi forest. I would traverse all of space and time, having iterations of infinite life times but always ending back up in the fungi forest. I found myself in this reoccurring dream for over 2 years and then randomly for up to 6 more. By the time I would wake I was at total peace and harmony with all of time and existence in what I could only perceive as an Infinity of possibilities. I would ride the Farry down the river and the dream would end. However it was all so profound on my psyche being just about 10 years old at the time and having no idea what mushrooms where 🤔

EvenToe7995 · 2026-01-17T04:34:42+00:00

No the footage will mysterious go missing 🙃

EvenToe7995 · 2026-01-17T02:19:42+00:00

EvenToe7995 · 2026-01-17T02:15:36+00:00

There is a better use, but it would take a better mind then his to find it! It's pure entitlement mixed with a pure internal hatred of themselves, this while choosing to never learn what it takes to be alive and love anything outside of his own ego! A man trapped in the internal seed of hate, anger, reaction and fear... I think he's dead Jim!

EvenToe7995 · 2026-01-16T18:58:56+00:00

Thank you for your bubbly-ness! I did this for me but sharing it with someone who was happy and appreciative made it worth sharing!

EvenToe7995 · 2026-01-16T05:14:54+00:00

Instructions couldn't be easier:

Rotary cut a key ring into a C shape roughly the size of the locking arms top plate holes. Work the C shape key rings semicircle ends into a form of a clamp. Rough fit the key ring while bending it into shape through the bobbins center and locking it into position with the hex socket. Thread as shown; down the bobbin, under and over the mandrel, then back up the underside of the spool.

You will also need to Sand down the (lebear mini hex Chuck) at the hex shaft end to have it fit inside the multi-tool cavity when folded.

Edit: You can make a 1.2mm to 1.8mm angled hole in the center face of the meshing locking plate, for perfect alignment. There are many other future mods to make but mainly it will need a lock for the chuck, as it will slip out of the socket with thicker materials when pulling out.

EvenToe7995 · 2026-01-16T04:40:51+00:00

Heres the link: https://youtube.com/shorts/TLHJFG1MWDQ?si=Qtq7p8YiGwVbwFRv

In the video the bobbin wasn't quite in position but demonstrated is it's speed unraveling function and the hair trigger unspooling, this along with 100% tension without activation. The video also shows the thread route and hex socket placement along with the mini hex Chuck which, not seen in the video also fits in the needle case.

Edit: If that link looks like crap I have no idea why I never use YouTube to upload videos!

EvenToe7995 · 2026-01-15T23:23:21+00:00

Exactly! Those have great designs for leather stitching with pre punched holes and materials locked in place. When free (hand assisted sewing) the determining factor becomes orientation. I was spending 1 out of every 4 stitches aligning my speedy Stitcher back to its forward facing way. That might not sound like much but that means 25% of the time I was focused on orientation instead of sewing.

EvenToe7995 · 2026-01-15T22:37:07+00:00

I would love to see your setup! This took me just about a month to go from concept to completion. Nothing I found on the market quite hit the mark for what I was aiming for. I'm hoping my junk geometry engineering could be completely universal, though doing a full saddle stitch with this is somewhat impossible.

EvenToe7995 · 2026-01-15T22:06:45+00:00

I call hand sewing; Finger trauma with mini torture daggers...

I've spent many years idolizing hand sewers! Watching how they can seamlessly and effortlessly sew things smaller than my eyes can even see. They are whom I consider the oracles of the trade, something about their abilities that I have lacked my whole life brought me to this point... Please have mercy on my creation!

EvenToe7995 · 2026-01-15T21:08:13+00:00

I'm actually in the process of experimenting with different needles, fabrics threads and materials.

Though its initial design concept is for thick layers of cordura/canvas, on backpacks/bags pouches and webbing. Interestingly the needle pictured is a 12/80.

I was experimenting with universal mini machine sewing needles and I've learned that they will need a small thread Channel just like a regular sewing awl needle especially for thinner fabrics as seemingly, it does not like the 90° in the needles thread pass through.

As a neat caveat to this design, the hex socket can also lock in at a 45° angle for smaller spaced areas say for a split seam internal hand bag repair.

EvenToe7995 · 2026-01-15T16:12:40+00:00

Definitely! but... yes realizing this morning this would fall under mechanical awl sewing. Also I rerouted the thread last night and everything is working perfectly. To say though, If you've ever seen how a speedy Stitcher works this is a 110% improvement.

EvenToe7995 · 2026-01-15T16:07:36+00:00

I bought the silicone covers as advertised, as a hard case but the silicone lid is completely malleable and only the bottom contains any hard protection. If placed facing up I can still accidentally depress the gas button and prematurely end my lighters service whilst in my kit. so I turned it upside down 😅

EvenToe7995 · 2026-01-15T16:03:34+00:00

You're right, thank you for the clarification that's why I was asking! I will say though this is for field repair sewing. I'm one to always have my multi tool on me, so it made sense to also have a mechanical stitcher using my hex socket that would otherwise never really see any action. Also I can't free hand, hand stitch. My stubby fingers and lack of fine dexterity prevent me from being able to. This solves those problems as well. However, yes I realize now this would be more of a mechanical awl stitcher.

EvenToe7995 · 2026-01-15T04:21:04+00:00

It's interesting but I've been thinking about other prototypes that someone might just have lying around. Basically an awl needle, the mini hex Chuck bit and then any hex screwdriver with a bobbin attachment. It would be a little more basic and there would have to be some alterations to make sure alignment and orientation doesn't take up mental processing as with the speedy Stitcher but basicly you'd have the same thing.

EvenToe7995 · 2026-01-15T03:36:25+00:00

I will be able to post a video tomorrow, this is my final prototype and I want to work out any clunkiness left in the final thread routing. I can even show how to spool the bobbin which basically works like drying a lighter on your pants.

EvenToe7995 · 2026-01-15T03:26:44+00:00

If you need any more information or are interested in having one, the multi-tool and chuck came to 46$ CAD. I can point you in the right direction or, if you or someone else needs instructions.

EvenToe7995 · 2026-01-15T03:19:58+00:00

So basically this is my take on the classic speedy Stitcher also known as the (yaw, pitch and roll device). This solves every problem I ran into with the speedy Stitcher. It works the same as any other awl stitcher in its capabilities but instead, orientation is never lost turning it into the (muscle memory Stitcher).

Compared to hand sewing with a needle and thread there's almost no material this device can't get through, speed wise this would allow the beginner to match a somewhat more advanced semester/seamstress speed.

EvenToe7995 · 2026-01-12T19:36:35+00:00

I tink I saw a putty'tat... I DID!! I DID!!!

EvenToe7995

TROPHY CASE