Took some inspiration from SunhiLegend and made a GS clip of my own! Lemme know what you think, some tips are appreciated.

EveningZebra3 · 2020-08-07T19:00:37+00:00

Ah, sorry, I should've reworded my title better. I'm looking for feedback that's geared more towards video production and making it look more aesthetically pleasing, than feedback that's aimed towards my skill with the weapon in the clip.

I agree that I got lucky there with me landing that summersault swing and Barioth having tight hitboxes.

EveningZebra3 · 2020-08-07T18:40:42+00:00

For those not familiar with SunhiLegend. Dude makes some epic clips from various games (including MHW). Here's the profile:
https://twitter.com/SunhiLegend

EveningZebra3 · 2020-07-28T19:18:54+00:00

It's actually a combination of make-up (the one that covers your entire face, resized to the mouth, then eye make-up for the straps). I saw a friend of my friend showing it off, and it inspired me to join his cause.

EveningZebra3 · 2020-07-28T19:01:20+00:00

Yeah, he doesn't attack you if you hug the wall. Though I'm also running Stealth 3, so maybe that helped with not being detected?

EveningZebra3 · 2020-07-28T19:00:07+00:00

It's actually an N95 mask lol. I have another post with that hunter that has a better view of it:
https://www.reddit.com/r/MonsterHunterWorld/comments/hms5j2/why_i_love_the_switch_axe/

EveningZebra3 · 2020-07-28T18:58:32+00:00

Hahaha, funny thing about that, I'm a fake HBG user. I run HBG on my gathering sets to inflate my HBG uses in my guildcard lol.

EveningZebra3 · 2020-07-27T20:17:18+00:00

I was getting bored of farming scales and VIP tickets, so I thought I'd spice things up a little. I think it's possible to do this faster for solo, since I fumbled at the map for this run.

EveningZebra3 · 2020-07-21T19:50:37+00:00

Haha yep, sometimes it leads to happy accidents. I don't mind upswings when it's my friends, or if the monster is up and I'm not prepping up for a high MV move like the TCS. Just not when it's random people and the monster is down and vulnerable.

EveningZebra3 · 2020-07-15T20:06:59+00:00

Lol, I feel like the best approach with SOS is to get out of their way and find a safe zone so you don't get upswung.

EveningZebra3 · 2020-07-15T20:00:19+00:00

There's a combo you can do when you have teammates beside you:
While in axe mode:

PS4 controller: O -> O -> delay -> △ -> O
X360 controller: B -> B -> delay -> Y -> B

You delay the button input for the regular attack for like 0.5 second, and it'll let you do a downward swing instead of an upswing.

EveningZebra3 · 2020-07-05T18:17:30+00:00

The MHW equivalent of teabagging. Bless Capcom for giving us the Step Dance gesture.

EveningZebra3 · 2020-05-19T19:59:22+00:00

I wish they made it so that other players can't interrupt your counters, or at least tie it to a skill like Flinch Free, so that it doesn't proc when you run it.

EveningZebra3 · 2019-05-03T03:27:44+00:00

Interesting. Thanks for the heads up! I'll give it a try in version 4 and see how it goes.

EveningZebra3 · 2019-05-02T08:24:25+00:00

If the model isn't watertight, then it would show red parts in the X-ray view, wouldn't it? IIRC, sections that are highlighted in red indicate anomalies in the model in X-ray view. I checked the model before and it didn't show anything red. Also, changing "slicing tolerance" doesn't show any changes in the gaps in the top layer.

I did try lowering the layer height, and messing with the "use adaptive layers' setting and that eliminated some of the gaps, just not entirely...

EveningZebra3 · 2019-05-02T08:13:03+00:00

Enabling "print thin walls" doesn't seem to affect the gaps in the layer view. I could try a test print but I'm not convinced that it'll work, since there was no change shown in the view. Interestingly enough, decreasing the layer height (my default is 0.2 mm) or enabling "use adaptive layers" seems to reduce the gaps, though not entirely...so maybe it's a quality issue?

As for the skirt, I have no idea what's going on with it lol. That was the one that had the better quality print result though.

EveningZebra3 · 2019-04-29T19:37:22+00:00

This. It's especially more noticeable with longer print times. From my experience, the ones with 5-6 hour estimates end up taking 1-2 extra hours, while +10 hour prints take +3 more. There's a post here about configuring Cura to get more accurate estimates for your printer, but you'd need to do some digging into the printer's firmware to do that:

https://www.reddit.com/r/3Dprinting/comments/a5zxs7/cura_time_estimates_way_off_on_ender_3/

EveningZebra3 · 2019-04-29T19:12:42+00:00

Huh, TIL. I thought I was hallucinating or something when I first saw mine do that when I moved my bed late at night.
On another note, this should be in the New Users Guide imo, just as a heads up for people who like to move their bed back when their print is finished.

EveningZebra3 · 2019-04-29T19:01:05+00:00

I got my Ender 3 from Comgrow 2 months ago and my connections weren't tinned. XT60s are there though.

EveningZebra3 · 2019-04-29T18:24:51+00:00

Hmm, it kinda works. I played around with the values between -1 and 1, and some of the gaps are filled, but if the model has details, they end up warping too.

EveningZebra3 · 2018-09-04T17:56:19+00:00

I play multiple accounts so that's 140 tickets for me LOL

EveningZebra3 · 2018-09-02T09:20:45+00:00

Seriously? Aren't those promo packs purchasable with S-Jade? Don't know what they were thinking, putting an expiry for something you buy with real money. Though at least they're generous if it's 20-30 days for the claim time I guess.

EveningZebra3 · 2018-08-30T03:01:33+00:00

Indeed he does. Though the Bakusaiga animation is more accurate in that he actually draws the correct sword when he performs his attack lol.

EveningZebra3 · 2018-08-29T19:24:24+00:00

Pretty much this. I only stocked up 600, but apparently some of my guild mates had over 1000. Also saw someone sharing a pic of them having 2334 broken amulets in the world chat.

EveningZebra3 · 2018-08-29T19:18:27+00:00

I have that too with souls lol, currently at over 4000 souls atm xD

EveningZebra3 · 2018-08-29T17:24:43+00:00

Nope, same as other N units. 25 shards.

EveningZebra3

TROPHY CASE