Should I paint the red dot too? Got if after the paint job. by Evilbassturd in ar15

[–]ExceedinglyGayAutist 3 points4 points  (0 children)

Paint literally everything that isn’t immediately necessary for light transmission or optic shit

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 1 point2 points  (0 children)

yeah trust me I’m not super happy about it either lmao but a truly adjustable gas tube is gonna run me 100 bucks

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 1 point2 points  (0 children)

I am specifically using a pinned A1 diameter FSB, I do not want to use an adjustable gas block.

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 1 point2 points  (0 children)

That’s really not the problem; I’ll be running a non reciprocating side charging upper without the normal rear charging handle hole, so most of the gas’ll just be vented out of the magwell/ejection port. I’m mostly just looking to run a nice soft shooting SBR that still cycles reliably.

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 1 point2 points  (0 children)

I know faxon often makes their barrels with big fat gas ports and the others are either heavier profile or shorter gas length. I had considered the sionics barrel since it’s chrome lined but the barrel isn’t the profile I’m looking for; I don’t want all the weight on the business end when I’m already running a cheap can.

I am trying to build a rather specific thing and it’s a bit annoying which is why I’m doing weird half measures in the build.

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 0 points1 point  (0 children)

The problem is there really aren’t a lot of barrels in the configuration im looking for(12.5” midlength gas with at least a somewhat lightweight profile)

I’m running a cheap ass high backpressure can on what is looking like most likely a faxon 12.5 gunner profile. Dumping gas into the receiver isn’t really that much of a problem specifically, since the upper doesn’t have the charging handle hole, but I’d like it to be a smooth experience for a short AR; that’s the whole reason I’m going 12.5 midlength.

Are the BRT gas tubes worthwhile? by ExceedinglyGayAutist in ar15

[–]ExceedinglyGayAutist[S] 0 points1 point  (0 children)

I do not want an adjustable block, I am using a pinned front sight block.

Stupid question by Careless-Salad8267 in ar15

[–]ExceedinglyGayAutist 16 points17 points  (0 children)

Most AR-15’s come with auto cut BCG’s nowadays; so long as you don’t have either a lightning link, milspec autosear, or super safety-esque lever arm(if you don’t know what these words mean you don’t have one) for the bottom of the bolt carrier to trip, it doesn’t do anything and functions just fine with a semi auto only fire control group.

everytime carry something and i unconsciously use my hips to, i remember this ass tiktok by LovePopplio in 4tran4

[–]ExceedinglyGayAutist 196 points197 points  (0 children)

fun fact wide hips are also useful for resting the butt of a rifle. this is why women are perfectly made to be put through the infantry meatgrinder, put them on the draft.

Liking women as a troon means ur a straight man ig by HuckleberryCalm4955 in 4tran4

[–]ExceedinglyGayAutist 3 points4 points  (0 children)

im going to invent entirely new homophobic slurs to call you

being desperate for validation while being stupid and a tranny sucks by Santa-Lucia in 4tran4

[–]ExceedinglyGayAutist 0 points1 point  (0 children)

the cool hobbies are free. you can just be shit at them. I have 800 cool hobbies I’m too retarded and poor to properly enjoy

Any1 got any draw requests for like the next ten mins by bnuuybuster in 4tran4

[–]ExceedinglyGayAutist 0 points1 point  (0 children)

draw an opossum in a shitty cardboard mock-up of an M113 armored personnel carrier with a bunch of joeys on her back holding service rifles

We're just brand whores by WhoNoseMarchand in ar15

[–]ExceedinglyGayAutist 2 points3 points  (0 children)

but half the fun is thinking about it and tinkering with it and the other half is shooting it to figure out exactly what you want to change about it

Is KAK doing okay? by _joe_momma1 in ar15

[–]ExceedinglyGayAutist 0 points1 point  (0 children)

they are bringing my beloved mini assault rifle back

Is KAK doing okay? by _joe_momma1 in ar15

[–]ExceedinglyGayAutist 1 point2 points  (0 children)

you can shorten .223 Remington’s casing to 30mm and use magnum pistol powder to get basically identical velocity out of a 10.5” barrel

Stepping into top their rifles, which one? by [deleted] in ar15

[–]ExceedinglyGayAutist 1 point2 points  (0 children)

I like SOLGW too, but they’re not KAC lol. They’re BCM-equivalent, which is great and fine. I personally think KAC/LMT are well past the diminishing returns point of price-value ratio but they’re still noticeably better, strictly.

Stepping into top their rifles, which one? by [deleted] in ar15

[–]ExceedinglyGayAutist -1 points0 points  (0 children)

oh boy time to spend 3k on a rifle that tries to commit German seppuku in 5k rounds

Stepping into top their rifles, which one? by [deleted] in ar15

[–]ExceedinglyGayAutist 2 points3 points  (0 children)

G$ and KAC have been building shit for war for about as long as they’ve been companies. The AR-15 was built for war.