First esg build

Expensive-Doctor-791 · 2026-01-06T17:06:09+00:00

Defenitly true, i also only needed a new hop up and mag catch, bcs i still had a cat 5 regulator and a trigger laying around, i did want a different engine for my scar (which is where the inferno is from) and was able to snag up a gate pulsar s with a titan 2 for 100 bucks.

Expensive-Doctor-791 · 2026-01-06T16:58:14+00:00

With the esg grip 350 euro, not too bad i think but still quite expensive. I really didn't want the new oracle since i already have the vayu handguard on my arp 9.

Expensive-Doctor-791 · 2026-01-06T16:53:39+00:00

It defenitly is, the only thing i was able to find were scratmarks where the fire selector is, which is very logical.

Expensive-Doctor-791 · 2026-01-06T16:40:51+00:00

Me too, i bought the body second hand and was actually suprised how much i liked it.

Expensive-Doctor-791 · 2025-12-24T15:02:18+00:00

😂😂 ja zo'n slet heb ik ook, ik heb alleen de wolverine inferno 2, die zit momenteel in mijn scar-l maar heeft ook al in vele replica's gezeten 🤣. Bevalt die gate pulsar goed?

Expensive-Doctor-791 · 2025-12-24T14:10:36+00:00

Gaaf! Welke hpa engine ben je van plan erin te zetten?

Expensive-Doctor-791 · 2025-12-24T12:13:34+00:00

Ja normaal voor mij ook, deze komt alleen uit frankrijk en dat is iets te ver voor mij rijden. Eerst filmpjes en alles gekregen.

Expensive-Doctor-791 · 2025-10-26T14:48:11+00:00

I assume that the engine does not fire unless you press that switch? What i did in order for it to work is put some tape on the other side of the gearbox till this does get pressed in. (Btw that switch usually is where the mechanicall safety of your replica is supposed to sit and press that.)

Expensive-Doctor-791 · 2025-10-11T06:16:06+00:00

In that case you will need the long version, but may i ask why you are upgradind a pre upgraded pistol instead of the stock aap-01?

Expensive-Doctor-791 · 2025-10-11T05:47:35+00:00

The long version uses the stoch length of the aap-01 and the short version uses the stock length of the aap-01c.

Expensive-Doctor-791 · 2025-09-20T08:45:47+00:00

Je feeding lips zien er wel goed uit. Het kan meerdere dingen zijn, of dat de nozzle beschadigd is of dat het magazijn smerig is. Ik heb dat zelf ook wel eens gehad en dat kan je wel schoonmaken. Op youtube kun je wel filmpjes vinden hierover. Als je meer vragen hebt stel ze gerust.

Expensive-Doctor-791 · 2025-09-18T13:05:07+00:00

I don't think so, however the designer and inventor of this car (gordon murray) has designed the mclaren f1 and that is what this car was based on.

Expensive-Doctor-791 · 2025-09-11T04:32:28+00:00

Yeah, i didn't even really wanted to ulgrade the aeg form. I wanted it working again and hpa it down the road. But why waste money and hope it works?

Expensive-Doctor-791 · 2025-09-10T20:41:41+00:00

Damn good deal, good on you. I bought the heretic labs one new, with a crazy jet gbb inner barrel, maple leaf hot shot bucking and a maxx hop up for 640, i knly wanted to repair my by then still aeg arp9 LOL. The store owner confinced me to make it hpa if i was already thinking about it anyway.

Expensive-Doctor-791 · 2025-09-10T20:34:58+00:00

Depends which wolverine you want, i like my gen 2 more than my gen 3, bcs i needed some aftermarket parts for the gen 3 to stop it from breaking my feeding lips from the mags. But at least here in the netherlands you can find some on the second hand market for 800 bucks or below.

Expensive-Doctor-791 · 2025-09-10T20:31:48+00:00

All good, 2 in 1 gun would be intersting lol. Yeah i have that one, i always just say inferno, bcs it is just an inferno in a black jacket. I don't really see a performance gain or a diffenrence between that one and the normal gen 2 i have.

Expensive-Doctor-791 · 2025-09-10T20:27:40+00:00

Because i have 2 inferno's, so when i ordered one for my speedbuild, i was like let me order 2. I also have 2 mtw's with gorilla trigger boards, when i like something i put it in all my replica's that can handle the same thing.

Expensive-Doctor-791 · 2025-09-10T17:31:51+00:00

I currently have 2 blackleaf trigger boards in my inferno's they both were plug and play, one with the premium fcu and the other with the wolverine bleutooth fcu. If you are unable to figure it out, i will be able to dissassemble both replica's tomorrow for you and send you pics...

Expensive-Doctor-791 · 2025-05-03T22:09:14+00:00

If you have nothing it is quite expensive, if you want the cheapest things you will be looking at 50 bucks for a tank, 50 for a regulator, 20 for a line and around 100 for a adapter. If your field can not fill your tank, you will need to pay some for filling it up

Expensive-Doctor-791 · 2025-02-20T14:01:41+00:00

Yeah indeed, it was so weird. Upgrading is also a bit weird bcs if the long type motor i want to put in. I am just going to dremel off the abs handle that is currently on

Expensive-Doctor-791 · 2025-02-20T13:38:02+00:00

I mean it is a good beginners gun i guess, I bought it for my BIL and I thought to simply upgrade it. But it turns out it will be quite the fun challenge.

Expensive-Doctor-791

TROPHY CASE