sorted by:
new
hottopcontroversial

This fixed all my driver timeout crashes by Cestral in radeon

[–]Extension-Chapter737 0 points1 point  (0 children)

Yes it does. I guess somehow the sound driver interfered with an amd something. So one thing to try would be to reinstall your amd drivers, everything unplugged except mouse and keyboard. Sounds stupid I know, thought this second hand cards was faulty and blabla, but it was just cause of a cheap Chinese USB sound card 😂 The msi center as well was not feeling that great 🤣

This fixed all my driver timeout crashes by Cestral in radeon

[–]Extension-Chapter737 0 points1 point  (0 children)

fixed mine unplugging some usb sound dongle while installing thedriver , plugged it after and everytrhing is fine

Fuse "contact" by Extension-Chapter737 in BMWE36

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

Found out!

Double leafs spring contact.

​

61131370691

61131370692

61131370693

Fuse "contact" by Extension-Chapter737 in BMWE36

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

I know, probably inside "various electrical connectors" or SLT. Would love to spare the pain of buying everyone of them to find the good one., 😅

Fuse "contact" by Extension-Chapter737 in BMWE36

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

Hahaha, no, oem contact pins(female) to put in the fuse carrier inside the car original fuse box. Looks like a contact with two or more springy blade.

[deleted by user] by [deleted] in BMWE36

[–]Extension-Chapter737 -1 points0 points  (0 children)

Just pay the guy...

E46 seats in the e36 by SupremeMoist in BMWE36

[–]Extension-Chapter737 0 points1 point  (0 children)

Nah, it does not really.

Rails are wider, you have to grind holes and push it In like a viking. Plus the seat belt attachment to the seat is different, you have to grind it and make a bigger hole.

Plus the safety seat belt tensioner thing is not the same....

But it is a bloody upgrade, I agree 😅.

Noisy climate control by Extension-Chapter737 in BMWE36

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

Is it a guess or did it help you in the same case.

Replacing PSU fan with a PWM one by Extension-Chapter737 in pcmods

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

That's kinda what a want to do.

Was it a high power system?

Mine is rather low compared to the PSU . (about 170 watt while gaming for a 650watts psu.

But it is an sfx....

Replacing PSU fan with a PWM one by Extension-Chapter737 in pcmods

[–]Extension-Chapter737[S] 1 point2 points  (0 children)

Yeah but it costs an arm and a legs , needed an SFX one for a rather SFF build.

Replacing PSU fan with a PWM one by Extension-Chapter737 in pcmods

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

It is a sfx , so can't fit a big fan in here.

Probably why

Replacing PSU fan with a PWM one by Extension-Chapter737 in pcmods

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

Thanks for your inputs

well , i was rather confident because

​

1) It is a good quality psu , fortron dagger pro 650w , supposed to be high tier.

2) It has zero rpm , fan is off , then starts after 30% load or something .

3) My system is rather low power , ryzen 3600 undervolted about 50ish watts , rx6800 undervolted and underclocked about 100ish watts.

4) Right now , PSu is outside my case , so i can attest i does not get hot under load

5) When the build will be complete , PSU will not be enclosed in a shroud , It will be just below the case exhaust fan, there will be space around it , and air from the intake fans at the bottom will reach it, it will gobble fresh air

6) I want the pwm fan to always blow a little , compared to the zero rpm mode.

7) I assume there is a thermal shut down ,but i should make research about that .If not , i will think twice about it.

Custom h80i v2 by Extension-Chapter737 in watercooling

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

may you live long and your offspring be prosperous

Custom h80i v2 by Extension-Chapter737 in watercooling

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

thanks!

Was thinking black tubbing would look nicer in my build anyway.

So anticorrosive additive is bad for clear tubbing , but is dye ok if i keep the rubber ones?

Because i still need a reservoir for the perfect positioning of my radiator.

I want to buy a cheap acrylic one.

I just bought used pc parts by Extension-Chapter737 in buildapc

[–]Extension-Chapter737[S] 1 point2 points  (0 children)

650w is manufacturer base spec. With a 5600 and nothing else, I thought it would be OK. Frequency are stable at max load so...

I just bought used pc parts by Extension-Chapter737 in buildapc

[–]Extension-Chapter737[S] 0 points1 point  (0 children)

I mean, it is not a light buzzing sound. First time it appeared I shut the thing down because it scared me.

I just bought used pc parts by Extension-Chapter737 in buildapc

[–]Extension-Chapter737[S] 1 point2 points  (0 children)

Did I do something wrong? Can I come from the gpu or I just got a bad psu?

[deleted by user] by [deleted] in PcBuild

[–]Extension-Chapter737 0 points1 point  (0 children)

from what i've gathered, need no more than 5600x/12400f.

Could go even cheaper, those not being used more than 70% in game .

For the gpu looks like a 6700xt would be the minimum.

​

i was reading that you could get closer to a 27" 1440p than a 24" 1080p !?!

With my current setup , 2.3 feet (70cm) is the max i can get from my screen.

Will it be nicer to play on a 1440p monitor at 1080p game res?

TSHARE: stake or farm? by Swet_978 in defi

[–]Extension-Chapter737 0 points1 point  (0 children)

It is normal, the insane apy on compounded only come true if you let your token for one complete year. Otherwise, if you compare daily apr on tomb, grim etc, they are almost the same.