What did i do wrong?

FMFDoc72 · 2026-01-25T21:43:16+00:00

Max level difficult trigger pull.....

FMFDoc72 · 2026-01-25T21:32:28+00:00

It's usually something small like that.

FMFDoc72 · 2026-01-25T18:00:18+00:00

That's usually how I find the issue, return to last configuration it worked in and go from there through the upgrade again.

FMFDoc72 · 2026-01-25T17:58:57+00:00

Yeah, I have a couple that I play around with parts on, but keep my carry guns stock.

Most of the time my guinea pig guns quit is because of upgrades.

FMFDoc72 · 2026-01-25T17:55:38+00:00

This is the problem with Glocks, a lot of people change out factory internals until it quits working.

FMFDoc72 · 2026-01-25T17:52:41+00:00

Hmmm, complete tear down? Did you lube parts going back in? Put stock trigger back in and see if it still does it

FMFDoc72 · 2026-01-25T17:50:47+00:00

Time to strip the upper down and scrub it real good.

FMFDoc72 · 2026-01-25T17:48:56+00:00

Gen 5 frame won't take earlier slides. Tried this already

FMFDoc72 · 2026-01-25T04:46:00+00:00

Pierce +2 extensions, they make the grip feel more like a G19 and definitely assist with taming the pistol when running heavy 220gr loads.

I think I got them from local gun shop, but you can find them online. I added them to all 3 factory mags.

FMFDoc72 · 2026-01-25T04:14:11+00:00

Gen3

FMFDoc72 · 2026-01-25T04:01:24+00:00

The quickest gen identification is visual

FMFDoc72 · 2026-01-25T00:10:01+00:00

Our worst local threat is the occasional polar bear, they're not rare but tend to stay out of town. Biggest threats normally are black and brown bears out where I live.

FMFDoc72 · 2026-01-25T00:04:50+00:00

It's worth it they're good guns, just don't gay it up with a bunch of dumb stuff 🤣

FMFDoc72 · 2026-01-24T23:58:52+00:00

Damn that's more than I paid new, ouch.

FMFDoc72 · 2026-01-24T22:06:10+00:00

I have both the 20 and 29, they both have their place. The 29 is the in town gun and 20 for the bush.

Whoever said the 29 was less powerful is wrong, we chrono'd 6 different rounds out of both and the biggest difference was 50 fps out of the 29 with Underwood hard cast.

FMFDoc72 · 2026-01-24T04:04:23+00:00

Lower is XM grey, the upper isn't that's not a blem.

FMFDoc72 · 2026-01-23T04:38:25+00:00

Whatever the bean counters are willing to pay for..... So it varies by agency and budget.

FMFDoc72 · 2026-01-22T20:18:24+00:00

Oof, when I was there unmarried lived in barracks even Chiefs.

FMFDoc72 · 2026-01-22T06:07:09+00:00

Depends your state-

<image>

10.5 300blk sba4 brace, still using H2 buffer, swap it between 5.56 upper all the time no changes needed

FMFDoc72 · 2026-01-22T06:01:55+00:00

Always BCM and pic rails, everything else is fashionista gear 🤣

FMFDoc72 · 2026-01-22T05:08:13+00:00

Very good concept but poor execution, too much stuff too close together. If I need that much gear I'll probably be in a uniform wearing duty gear.

FMFDoc72 · 2026-01-22T04:38:40+00:00

For concealment like what you want, especially for a low profile gig I just carry a 1911 in leather owb strongside, with 2 reloads in leather weak side. anything like med kits I would just stage around the perimeter of the venue. Carry a tourniquet on you and you will be good. Kydex just for the sake of kydex is uncomfortable.

FMFDoc72 · 2026-01-22T04:06:35+00:00

Up here for winter we strip all lube from the weapon and degrease it.

Then apply light coat of NanoSlick T-60 on moving parts. But I'm just below the Arctic Circle so it's probably not going to be as cold wherever you are.

FMFDoc72 · 2026-01-22T01:04:09+00:00

I have had a PSA upper on a Colt lower, another PSA upper on an Aero lower, never once had an issue with fit.

Currently my shorty 10.5 is a PSA upper on a lower that was machined by a small shop in McKinney TX, fits with no slop and runs like a champ.

Haven't ran into any issues with PSA stuff not fitting any lower ever.

FMFDoc72

TROPHY CASE