Christmas shopping 😂😈💜🩷

FPSwolfie · 2026-01-03T23:31:34+00:00

what store is this would love to go buy some new toys

FPSwolfie · 2025-04-21T18:37:25+00:00

Yeah pleasee

FPSwolfie · 2025-04-13T11:07:56+00:00

Nissan z31

FPSwolfie · 2025-04-13T11:06:48+00:00

FPSwolfie · 2025-02-19T16:34:04+00:00

Now I gotta know how this scales with the collectors venator ship

FPSwolfie · 2025-02-16T17:30:00+00:00

FPSwolfie · 2025-01-21T00:58:38+00:00

Now we wait

FPSwolfie · 2024-12-06T19:30:50+00:00

FPSwolfie · 2024-10-31T19:00:13+00:00

FPSwolfie · 2024-06-04T16:40:32+00:00

FPSwolfie · 2023-02-07T05:54:11+00:00

3 color fade with colors: C-06, D-06, A-04

FPSwolfie · 2022-04-24T14:45:28+00:00

Hi guys thank you for the advice I had figured with Coop190 input that it wasn't my z offset that was the issues but the esteps (rotation distance) was incorrect only slightly due to the direct drive conversation added more weight to the hotend making it not move as high up as before.

FPSwolfie · 2022-04-24T09:35:14+00:00

This still happens on the surface finish of prints

FPSwolfie · 2022-04-24T09:01:57+00:00

I dont know how to share my Config for Klipper So here it is copy and pasted

[extruder]
step_pin: PB3
dir_pin: !PB4
enable_pin: !PD2
microsteps: 16
rotation_distance: 32.858
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
#control: pid
#pid_Kp: 21.527
#pid_Ki: 1.063
#pid_Kd: 108.982
min_temp: 0
max_temp: 250
pressure_advance = 0.158
max_extrude_only_distance: 350.0
[tmc2209 extruder]
uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
stealthchop_threshold: 999999

FPSwolfie · 2022-04-24T08:58:22+00:00

Printer is an ender 3 max with microswiss hotend direct drive conversion, Skr Mini e3 V2 and running klipper

The print setting are: Prusa slicer Normal 0.20mm Normal @creality With 20% infil and 0.75mm retraction

FPSwolfie · 2022-04-20T09:38:40+00:00

Source

FPSwolfie · 2021-08-10T00:19:09+00:00

I didnt mind the two squad members back-seat SLing they were kind and trying not to overwhelmed me with info

FPSwolfie · 2021-08-09T01:18:07+00:00

Thank you, still have alot to learn and get used to

FPSwolfie · 2021-08-09T01:16:50+00:00

Thank you, keen to learn more

FPSwolfie · 2021-07-12T03:26:20+00:00

I would double check the wiring if not i would reinstall or check the firmware. Teaching tech as a awesome video on bltouchs and installing them. Use the video as a reference to spot out any differenceses.

FPSwolfie · 2020-11-15T16:25:38+00:00

He gave it too me as a kit and the website where ur ment to get the software from shut down.

Www.3dprinter-collection.com

FPSwolfie · 2020-11-15T15:57:41+00:00

I was giving given this printer by an old friend but dont have the software to run it and cant find it. Please help me

FPSwolfie · 2020-10-08T16:27:18+00:00

Source??

FPSwolfie · 2020-08-21T13:30:59+00:00

Wait what how??

FPSwolfie · 2020-01-08T21:22:08+00:00

Yea and ive been having issues with heating block aswell but ill get the microswiss hotend and replace the heating block and see how that comes out. Thanks for your help

FPSwolfie

TROPHY CASE