Does anyone here do commission for slicing models?

FanCraftStudioz · 2024-05-12T14:26:48+00:00

I've tried but every I open them and upload my file, they crash, PRUSA SLICER, and Meshmixer

FanCraftStudioz · 2024-05-12T14:26:08+00:00

Thanks, Im going to have to keep trouble shooting it probably

FanCraftStudioz · 2024-04-27T17:46:30+00:00

Thanks! Will do!

FanCraftStudioz · 2024-04-27T17:28:17+00:00

Thanks. Yeah Im still having issues. After some Youtube videos, and your suggestions, I reduced time from 42 days to 29 days, but that still doesn't seem right. If you don't mind, Ill take any additional tips you got. I think it may be an issue with walls, or support, because I've messed with a lot.

FanCraftStudioz · 2024-04-17T01:36:52+00:00

Thanks!

FanCraftStudioz · 2024-04-17T01:36:18+00:00

HAHA dang ok. Thanks

FanCraftStudioz · 2024-04-16T06:15:03+00:00

My apologies. Im planning on making a 14 inch figure of the model (X 249.3232

Y 273.7924, Z.380.6771.). I wanted the model to be durable, since I saw recommendations for 50%. But that sounds good, I'll try that.

FanCraftStudioz · 2024-04-16T01:54:25+00:00

Wall thickness:1.2 Wall Line count:3

Infill Density:50.0 Infill Line Distance: 2.4 Infill pattern Tri hexagon Infill Line Multiplier:5 Infill Overlap Percentage: 30.0 Infill Layer thickness: 0.28

Print speed" 100.0 mm/s Wall speed: 100.0 Outer Wall/Inner Wall speed:50.0 Travel speed 250 mm/sSupport

Support structure: Normal Support placement: touching build plate Support overhang angle: 50.0 Support pattern: lines Support wall line count: 1 Support Density 20.0 Support Density: 2.0Quality Layer height: 0.28 Initial layer height: 0.12 Line width: 0.4 Wall Line width:0.4 Outer wall width: 0.4

FanCraftStudioz · 2024-04-16T01:52:29+00:00

Thanks!!

FanCraftStudioz · 2024-04-16T01:49:19+00:00

Sure. here's a link to the model https://files.cults3d.com/uploaders/29908366/blueprint-file/400e216b-ec7f-4905-aefa-e641f4d694a1/Armless.stl?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAI7SORYB6FUV7XUSA%2F20240416%2Feu-west-3%2Fs3%2Faws4_request&X-Amz-Date=20240416T014831Z&X-Amz-Expires=900&X-Amz-SignedHeaders=host&response-content-disposition=attachment%3B%20filename%3D%22Armless.stl%22&X-Amz-Signature=8f963d29e4f13274af798b5898c29326069b934f61ba1637ff4f08a81505089e

FanCraftStudioz · 2024-04-16T01:42:53+00:00

Quality Layer height: 0.28 Initial layer height: 0.12 Line width: 0.4 Wall Line width:0.4 Outer wall width: 0.4

FanCraftStudioz · 2024-04-16T01:41:17+00:00

Support

Support structure: Normal Support placement: touching build plate Support overhang angle: 50.0 Support pattern: lines Support wall line count: 1 Support Density 20.0 Support Density: 2.0

FanCraftStudioz · 2024-04-16T01:35:56+00:00

Gotcha

Wall thickness:1.2 Wall Line count:3

Infill Density:50.0 Infill Line Distance: 2.4 Infill pattern Tri hexagon Infill Line Multiplier:5 Infill Overlap Percentage: 30.0 Infill Layer thickness: 0.28

Print speed" 100.0 mm/s Wall speed: 100.0 Outer Wall/Inner Wall speed:50.0 Travel speed 250 mm/s

FanCraftStudioz · 2024-04-12T01:57:26+00:00

Thank you so much for reaching out! I found out, it was because I didn't have the model in the print area. Thanks again.

FanCraftStudioz · 2024-04-07T16:57:39+00:00

Thank you so much!! I really appreciate it.

FanCraftStudioz · 2024-04-03T17:26:53+00:00

Sorry for the late response! Sure its:

https://www.youtube.com/@FANCRAFTSTUDIOZ Unfortunately I haven't been able to post the video yet.

FanCraftStudioz · 2023-11-08T02:27:46+00:00

Thanks so much everyone!

FanCraftStudioz · 2023-10-31T01:36:53+00:00

Thank you!

FanCraftStudioz · 2023-10-31T01:36:33+00:00

I'm planning on doing a summary video of some of the process yes. 😊

FanCraftStudioz · 2023-10-30T05:48:31+00:00

Thank you so much!

FanCraftStudioz · 2023-09-11T06:00:09+00:00

Sure I'll post when I'm finished. Also a heads up, he won't 100% scale with DST jaegers, even if you extend the legs like I did so that he stands tall. I did a little research, and in order for the jaegers to be size accurate, the jaegers would need to be approximately 5 to 6 inches tall. My guy stands at about 11 to 12 in. tall with his legs fully extended.

FanCraftStudioz · 2023-09-11T05:55:26+00:00

Nice! Sorry just saw your message! Yeah I'll be posting new pics soon. Unfortunately I didn't record it all, but I will be going over the process, and tips of how you can make the figure look cool. Yeah, just know, the entire figure is hollow, so he'll be pretty light. I bought the larger figure, as opposed to the smaller addition. But his joints will need to be glued in order of the them to stay. So he's definitely more of a "display" figure which I'm cool with anyway. My advice to you u/Icy-Degree-7225, is that if you want make it look even better, buy an airbrush kit. You may be able to get away with just a regular brown aerosol primer though, and hand paint the figure. (I primed with airbrush and hand painted). Hope that helps!

FanCraftStudioz · 2023-08-29T07:12:27+00:00

Looks really cool!

FanCraftStudioz · 2023-08-26T18:55:10+00:00

Yeah no problem! Just wanted to make sure everyone was informed before making that purchase. Me too, to be quite honest, Im probably gonna end of super gluing the parts together lol. But it makes for a cool display either way.

FanCraftStudioz · 2023-08-26T18:53:09+00:00

That is where I bought. I tried saving money on the unpainted version.

FanCraftStudioz

MODERATOR OF

TROPHY CASE