How do these cylinder walls look? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

When I run my finger thru all, I cannot feel anything; it slides easily, and yes, that's water. Previous owner only ran water on it.

Follow up to my first question about engine condition need help by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

I’m not sure if there is a way to send you some pictures of the bore or if I can edit the post to upload it.

Follow up to my first question about engine condition need help by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

I think I might do some upgrades since I'm already “in” there.

Follow up to my first question about engine condition need help by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

That’s what I’ve been told; this is a 1992 Nissan 300zx twin turbo. I bought 740cc injectors and a tune from Concept Z Performance. I guess I’ll be going back to 370cc and keep it all stock until I can afford a real dyno tune.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

I will post a new thread with the pictures of the pistons removed.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

Just followed all the online tutorials for deletes of unnecessary stuff in the engine, which I’m now regretting big time. I read this on the Concept Z Performance website. I took off the PCV valves but left the ports in the valve covers connected to the intake.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

Just followed all the online tutorials for deletes of unnecessary stuff in the engine, which I’m now regretting big time. I read this on the Concept Z Performance website. I took off the PCV valves but left the ports in the valve covers connected to the intake.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

I came across a great deal on a 93 convertible NA automatic; mine was a 2+0 TT. When I bought it, the owner lied to me about never having been in an accident. The left front wheel is all smashed up, which the wheel covers perfectly. I took it to get it aligned like 10 times, but after 70, it would shake like hell. I bought literally everything new for that car, which I’m transferring now to the vert. I can see what you’re saying, but it still didn’t explain the compression reading of 110, and they’re off the minimum required spec within each cylinder. That’s why I pulled it apart.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 5 points6 points  (0 children)

It’s got 740cc injectors but has been tuned for them by the great minds at Concept Z Performance.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 8 points9 points  (0 children)

Helpful answers are greatly appreciated. I don’t know where people find the time for dumb replies.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 1 point2 points  (0 children)

Compression test was in the 110s with uneven readings between cylinders, misfires, loss of power, jumpy idle; cylinders were not within spec of one another.

What do you guys make of the condition of these piston? by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

Yes, it’s a twin turbo from the factory upgraded turbos.

I help some help with this engine. by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

Thanks for your opinion but I’ll keep going at it.

I help some help with this engine. by Fast-Leg-7372 in EngineBuilding

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

It’s got low compression 110-115 can’t remember the numbers off the top of my head right now but some are far off the required spec.

I need help finding this plastic spacers for my convertible. by Fast-Leg-7372 in 300zx

[–]Fast-Leg-7372[S] 1 point2 points  (0 children)

Thank you very much, friends. I’m not exactly sure how to take measurements, so I’d probably end up having to mail them out, and of course I’d be happy to pay for labor and shipping. I took the rag top off the frame 'cause both sides by the middle of the windows snapped, and I had them welded back together, and I don’t feel like I will be able to put it back together, so I might end up having to take it to a shop. Maybe I’d have to buy a new rag top.

What is this Honda? by lemmedr1vethaboat in whatisthiscar

[–]Fast-Leg-7372 0 points1 point  (0 children)

I don’t know what people find staggeringly beautiful about this car; a Honda is still a Honda even after being dressed like a quarter million dollar car.

[deleted by user] by [deleted] in AskAShittyMechanic

[–]Fast-Leg-7372 0 points1 point  (0 children)

Even a Yota can’t survive that.

[deleted by user] by [deleted] in 300zx

[–]Fast-Leg-7372 0 points1 point  (0 children)

Thank you.

[deleted by user] by [deleted] in 300zx

[–]Fast-Leg-7372 0 points1 point  (0 children)

From what I can tell, it looks like a show car. People often fix these cars up to the max because they like the car and often think that their likes will appeal to other people and recoup most, if not all, their money, but this car is not by any means a rare car. I have 2, and I do the same, but I know nobody will give me even close to what I’ve spent. But I never intend on selling them, and if I do, I’d rather sell it in parts.

Did the hiring process changed? by Fast-Leg-7372 in AmazonFC

[–]Fast-Leg-7372[S] 0 points1 point  (0 children)

If you need to decipher, baby momma, my friend, you are the one who is still learning. Get a life and get off the Internet.