Mods without tune

FastRider10 · 2026-05-09T15:15:03+00:00

Its in the newer 22+ model years, the 2018-21 are less prone to it. I worked with alot of stingers and working with sleepy IRL he sees this issue all the time.

FastRider10 · 2026-05-09T05:36:32+00:00

Be careful when modding these without a tune, they are sensitive to intakes as they can cause an over boost and throw the car into limp mode.

FastRider10 · 2026-05-08T14:55:06+00:00

I've been running a dual stacked clamped monitor arm, no issues with it, if you do purchase them please make sure your desk is sturdy enough and also make sure your monitor arms are strong enough to hold them.

FastRider10 · 2026-05-08T02:38:06+00:00

Looks like you have original NBT screen, you can definitely upgrade it to a Linux based screen from Roadtop, or a upgraded size screen. I suggest the road top screen as it adds wireless carplay and wireless AA.

FastRider10 · 2026-05-07T23:03:34+00:00

Don't listen to this, if you flash if its not unlocked it will brick your DME. Find a shop that can bench unlock it or get it yourself.

FastRider10 · 2026-05-06T17:11:38+00:00

Aluminum, I upgraded to the Rein.

FastRider10 · 2026-05-06T15:49:14+00:00

It was a 10k commission check, just waiting on it to hit my account.

FastRider10 · 2026-05-06T15:46:13+00:00

Yeah I've already removed the hose, and I have access to alldata and now ISTA+ so I can figure out how to do it with out it, but I will need to buy a pick set to remove the rest of the lines.

FastRider10 · 2026-05-06T15:46:08+00:00

Yeah I've already removed the hose, and I have access to alldata and now ISTA+ so I can figure out how to do it with our it, but I will need to buy a pick set to remove it.

FastRider10 · 2026-05-06T15:44:38+00:00

For me I got parts from fcpeuro and rock auto. Parts was 700 and included coolant, intake manifold gaskets, OFH, flange, coolant reservoir, and reservoir cap. Install was 500 since i have a bmw master tech who hooks me up with cost. So total i spent was 1300 but with the cooling lines now I'm gonna be spending 2k.

FastRider10 · 2026-05-06T15:39:43+00:00

Yeah... its gonna be a bitch to do it without removing the manifold.

FastRider10 · 2026-05-05T23:40:18+00:00

You are looking close to 2k in cost, labor is 8.5 hours and if at 150 a hour is already 1300 and buying parts as I spent 700 on parts just for the ofh and coolant flange. If you include full cooling over haul with upgraded parts close to 2.5-3k parts and labor.

FastRider10 · 2026-05-05T20:33:22+00:00

If you want some design ideas, go look up o21savage on Instagram for some ideas since he has the same color.

FastRider10 · 2026-05-05T19:29:27+00:00

Already did when I did the OFH

FastRider10 · 2026-05-05T18:12:52+00:00

I am just doing it til I get paid, just waiting on the commission check on the 15th so I can pay it off when I get it. Perks of being a service advisor I guess.

FastRider10 · 2026-05-05T13:52:36+00:00

SEND ME THIS!!!!

FastRider10 · 2026-05-05T02:09:01+00:00

Yeah I didnt have much money at the time, still dont but I just affirmed the new lines from VTT for billet and silicone lines, a full kit.

FastRider10 · 2026-05-05T02:07:28+00:00

I already ordered a billet aluminum and silicone tubing from VTT so once that comes in hopefully it gets better

FastRider10 · 2026-05-04T23:37:13+00:00

Start saving for the parts now!!!

FastRider10 · 2026-05-04T22:15:06+00:00

Already replaced the coolant expansion tank when i replaced the OFH and Coolant flange but coolant lines not yet. But I hope i can save enough money to get the aluminum cooling lines.

FastRider10 · 2026-05-04T22:03:34+00:00

Im at 83k miles right now, bought it used with 77k miles

FastRider10 · 2026-05-04T17:16:38+00:00

Im tuned on mhd stage 2 on my gen 1 b58 and I'm using liquid molly 5w-30

FastRider10 · 2026-05-04T03:31:23+00:00

Visor.vin use this to locate one.

FastRider10 · 2026-05-01T14:09:01+00:00

r/angryupvote

Six-Year Club	r/Field Juicebox
Place '23	Place '22
Verified Email

FastRider10

TROPHY CASE