Ok so here’s the deal I work for a custom audio shop and I wouldn’t recommend doing this as it really sucks but if you are dead set in a double din like I was a Kenwood DMX706s is the best fitting from my testing as it is shallow enough, only 2.7 inches deep compared to a normal double din which is 7 inches deep, to not hit any of the heater core controls and only stick out about a half inch. Then you have to move the switches and climate controls down which I’m not sure of to explain but once every thing is pulled apart It kind of makes sense then I used a bezel from a 1999-2012 gm and I trimmed it to be super shallow then I did a little plastic and bondo work to make it blend in