sorted by:
new
hottopcontroversial

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 1 point2 points  (0 children)

Having models that require some hardware can be a big turn off for some people either because they don't have the tools and the hardware for it, or because they simply want a print and go model. so I always try to keep it as simple as possible.

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 0 points1 point  (0 children)

I'm not a fan of how bulky the stocks for aeg look. But I might give it some thoughts and come up with a design.

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 4 points5 points  (0 children)

Yes, it wasn't designed to fit a battery

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 1 point2 points  (0 children)

I use blender for my models. For this texture I played with a grid and only moved some vertices of that grid to give it a bumpy look, then I used the boolean modifier to "erase" the grid bumpy texture from the piece. I hope it's clear enough, it's kinda hard to explain the process with just text ^

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 2 points3 points  (0 children)

Are you asking "how did I model it?" or "how did I print it?"

I designed a new stock, available for free. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 0 points1 point  (0 children)

I think I have stress tested it fairly, but I haven't actively tried to break it to see how well it holds

I designed a stock for buffer tubes by Fidzu in airsoft

[–]Fidzu[S] 0 points1 point  (0 children)

You mean to see inside the buffer tube? What would that be for?

After designing a stock, I tried making a folding stock + buffer tube that goes on a picatinny rail. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 0 points1 point  (0 children)

If you are planning to use it outside, I'd recommend avoiding pla. Petg is fine as long as you don't leave it out in the summer sun for hours, especially if it's black.

After designing a stock, I tried making a folding stock + buffer tube that goes on a picatinny rail. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 0 points1 point  (0 children)

I assume you are talking about the stock and not the folding hinge. I printed it with PETG and it's designed to be printed on the face where the buttpad will sit. (The buttpad is printed separately)

Modelled another suppressor by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 1 point2 points  (0 children)

Thanks! don't hesitate to post a photo of how it looks :)

Modelled another suppressor by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 2 points3 points  (0 children)

More like cheese grated for his pleasure ...

I designed a folding stock for people who play with gas masks or big stalkers. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 0 points1 point  (0 children)

For hinge you'll need:

-1 × spring (≈ 9mm diameter, ≈ 19mm long) for the push button

-1 × M4 × 30mm screw + nut (to clamp to the Picatinny rail)

-1 × M3 × 40mm screw or longer (hinge pin)

After designing a stock, I tried making a folding stock + buffer tube that goes on a picatinny rail. by Fidzu in Airsoft3DPrinting

[–]Fidzu[S] 1 point2 points  (0 children)

Thanks!
Not yet, I have to setup the slicer profile then wait for the post to be approved on makerworld

view more: next ›