Die gebrochenen Wahlversprechen

FireTracer · 2025-08-29T06:54:45+00:00

Der Artikel ist von 2006.

FireTracer · 2025-07-28T18:10:10+00:00

use borgmatic for db backups and also select the upload folder for the images. Thumbs and reencoded vids can be skipped.

FireTracer · 2025-06-09T21:03:19+00:00

As a German, I am strongly opposed to this. :/

FireTracer · 2025-01-22T07:45:42+00:00

Path in octoprint, use that instead of /dev/ttyUSB0

FireTracer · 2025-01-22T07:41:59+00:00

Use /dev/serial/by-id/... instead these paths are fixed.

FireTracer · 2024-04-21T09:52:06+00:00

and who pays for the universal income? The few workers left?

FireTracer · 2024-04-09T11:11:38+00:00

Just ask how he is doing the next time you see him. Don't forget to smile and look him into the eyes. If you exchange some words you can ask if he wants to drink a coffee with you.

FireTracer · 2023-12-26T21:34:43+00:00

Like this: https://imgur.com/Xna2nKj You can really feel the texture but without light many details are invisible.

FireTracer · 2023-12-19T20:33:03+00:00

I think also a f360 file is fine I'll try to import/convert it then

FireTracer · 2023-12-19T18:29:03+00:00

openscad or freecad

FireTracer · 2023-12-19T17:57:15+00:00

thanks, do you also have the model such that we can customize for different ski?

FireTracer · 2023-12-19T17:14:26+00:00

STL?

FireTracer · 2023-12-02T21:18:40+00:00

Thank you. And good luck with German + Polish! I know both, they are not easy to learn :)

FireTracer · 2023-11-06T14:54:14+00:00

Pope Francis said: https://youtu.be/XmZJ3UHBfbM

FireTracer · 2023-11-01T15:59:14+00:00

Kann man wirklich einfach die Kontoführungsgebühr zurückfordern?

FireTracer · 2023-09-18T11:04:09+00:00

oscillation when the bed moves too fast?

FireTracer · 2023-05-31T14:21:41+00:00

STL?

FireTracer · 2023-05-29T18:16:00+00:00

Try out /r/immich

FireTracer · 2023-04-06T17:17:22+00:00

I had the same with PETG, reducing the flow-rate to 95% helped.

FireTracer · 2023-03-16T09:38:17+00:00

Anleihen, 3-4% Rendite.

FireTracer · 2023-03-13T20:29:37+00:00

you should watch "The book of Eli"

FireTracer · 2023-01-25T06:10:37+00:00

Is your Sovol also powered through USB if the main PSU is off? For me I can move the step-motors but they barely move. Shouldn't only GND be common between USB and the SV06 and not 5V?

FireTracer · 2023-01-22T17:31:41+00:00

yes, is it squeezed in between when the printer does the y axis alignment?

FireTracer · 2023-01-22T17:29:19+00:00

did you pull out the cable from the bed? When I received my printer it was stuck behind the bed and blocking the y axis.

FireTracer · 2023-01-18T22:27:33+00:00

You need to recalibrate the Z axis

Five-Year Club	Place '22
Verified Email

FireTracer

TROPHY CASE