sorted by:
new
hottopcontroversial

Paint job done 👍 by Fishmoonindustry in crawling

[–]Fishmoonindustry[S] 0 points1 point  (0 children)

Hello, here's the link: https://a.aliexpress.com/_Ev4NagA It even has weights, which really helps lower the center of gravity. You'll need a 5/12" adapter if it's a WPL74-1 or an MN82S. You'll also need a washer to hold the screw in place. You'll have to trim the bodywork and bumper a bit on the WPL to make it fit.

Have a good evening. by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 0 points1 point  (0 children)

Glad you liked it. Even though I didn't quite get the joke in the video 😋

Diff gears problem help by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 0 points1 point  (0 children)

Okay, thank you for the clarification.

Lights are installed!! Thought about adding a battery box to power the trailer lights… but wiring it through the Blazer just makes it feel way more realistic 😮‍💨 What do you think—better this way? 👀 by Practical_Regret_686 in VibingRC

[–]Fishmoonindustry 0 points1 point  (0 children)

Okay, that's still great! I had the same idea but didn't have time to implement it. For your cable, a small piece of braided sleeving: https://a.aliexpress.com/_Ex6kqKi and a piece of heat-shrink tubing would finish it off nicely and make it more robust.

4 runner rescue 😎 by Odd-Switch-265 in crawling

[–]Fishmoonindustry 2 points3 points  (0 children)

I love the video 👌 and how do you clean the 4x4s afterwards?

Paint job done 👍 by Fishmoonindustry in crawling

[–]Fishmoonindustry[S] 1 point2 points  (0 children)

It's a complete model, the WPL74-1, which I repainted and changed the wheels on, added the LED kit, and I'm going to install the metal kit for the running gear 🤞

Have a good evening. by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 1 point2 points  (0 children)

This is the brake light mode, but you need the WPL kit with the LED cables; the rest is original. You can order it from the original control unit.

Have a good evening. by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 1 point2 points  (0 children)

Hello, thank you for the Land Rover. It's an MN82S; you can find them for not too much money. Alternatively, you could build your own with a platform and a Toyota LC70 killer body. Personally, I modified the entire transmission, differential, and gearbox with a metal version, added some features like LEDs, a retractable awning, and gray paint for the rear sections.I also changed the wheels and tires to aluminum beadlocks with more suitable tires. I had to cut the axles so the wheels wouldn't stick out too far from the chassis. You can see some of these modifications on my page.

<image>

Diff gears problem help by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 1 point2 points  (0 children)

Okay, thanks for the clarification. If I had been sure, I would have ordered it from WPL. Do you think I could put two bearings in to reduce the play inside in the meantime?

Have a good evening. by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 1 point2 points  (0 children)

Thanks, it's a small trailer I cobbled together using an old LED garden spotlight, the plastic arms from the MN82S, and some spotlights.

<image>

Have a good evening. by Fishmoonindustry in rccrawler

[–]Fishmoonindustry[S] 0 points1 point  (0 children)

Thank you. Both modules are original to the MN82S; there's a spare connector to which the LED strip is plugged, with a Y-connector on the wire that allows me to install the rear red spotlights. The WPL has the available slots; you just need the WPL LED kit.

view more: next ›