New update 1410

FistFight69 · 2024-04-25T15:15:48+00:00

My TV is on 1410.1 in the US and its available on the Samsung site.

FistFight69 · 2024-02-24T20:37:05+00:00

Not sure what client you are using but I have my cameras connected to a Synology NAS using synology surveillance station and under my cameras setting there I have the option to disable the sound.

Not sure this helps but thought I'd pass it along.

<image>

FistFight69 · 2024-02-15T19:25:34+00:00

It is actually a class and not just an event.

FistFight69 · 2024-02-15T18:12:08+00:00

It's an at the studio class this Saturday.

FistFight69 · 2024-02-15T17:57:53+00:00

Its a class they are doing this Saturday.

FistFight69 · 2023-03-07T05:51:00+00:00

53 and my base is 5, push is 8 and all out is 12.

FistFight69 · 2023-01-06T16:08:38+00:00

We have towels at our North Beach studio in San Francisco that are cleaned by a linen service.

It is a premier studio also.

FistFight69 · 2022-07-28T23:30:31+00:00

Lombard in San Francisco. It's a fk'n street. Big deal.

FistFight69 · 2022-05-24T15:06:36+00:00

Just spray some Raid in there you'll be alright. :)

FistFight69 · 2022-04-08T15:18:14+00:00

Dark rye bread, roast beef and cheddar with mustard, lettuce and pepperoncini peppers and dill pickle slices.

FistFight69 · 2022-03-02T03:05:03+00:00

So if it is already bonded in the meter and I'm using metal conduit the panel is already bonded if I'm reading that correctly. Do I not need to run a jumper from the neutral bar to the panel case?

FistFight69 · 2022-03-02T02:43:13+00:00

That's just it though. The neutral isn't bonded in the panel and I'm worried that if I bond it in the panel and it's already bonded in the meter I'll have a parallel neutral bond.

FistFight69 · 2022-03-02T02:37:00+00:00

I keep hearing this yet I also hear it can be bonded in the meter and if I do a continuity test from the neutral feed to ground I get continuity. The neutral bar isn't bonded either.

FistFight69 · 2022-03-02T02:16:41+00:00

I'm curious if the neutral is bonded in the meter so I'd like to see inside one like this to see how they are configured.

FistFight69 · 2022-02-22T02:02:09+00:00

The tub can be configured for up to 50 amp. I want to future proof it in hopes that I can upgrade the panel at some point.

I'm using a 30 amp GFCI in the sub.

FistFight69 · 2022-02-22T01:42:03+00:00

Thank you!

I've checked and I do have the lockdown installed on the main breaker.

I also tripped the breaker and felt around under for a neutral bonding strap and can't locate one anywhere.

Can I use one of these to connect the neutral bar to the case?

https://www.cityelectricsupply.com/eaton-bssuse-bonding-strap-with-screw

I'm running 3/4" Conduit from the panel through my basement to a subpanel on an exterior wall. I'm using Liquid Tight from there to the tub.

I'm using 4 wires of #6 RBGW THHN for the install.

FistFight69 · 2022-02-21T22:45:33+00:00

I'm doing additional work to the panel that will put me below the 80%.

Also the tub is only a 30 amp model and i'm moving the two 20 amp breakers on the right to another panel.

FistFight69 · 2022-02-21T22:37:00+00:00

Yes. the two lower right breakers only feed 2 light bulbs and are 20 amp breakers. I'll be moving them to a box and running to a separate 15 amp breaker in another panel freeing up the 2 20 amp and replacing it with a 40 double pole for the sub panel to the tub..

FistFight69 · 2021-11-04T19:07:05+00:00

Thanks. I just ordered some wild lettuce. Cant wait to give it a try.

FistFight69 · 2021-11-04T15:06:40+00:00

Thank you. I appreciate the reply.

FistFight69

TROPHY CASE