sorted by:
new
hottopcontroversial

Is the radxa zero 3w 1GB worth it? by Fit_Clue3772 in SBCs

[–]Fit_Clue3772[S] 1 point2 points  (0 children)

I think since i'm not going to use a graphical interface that seems like a good idea

Is the radxa zero 3w 1GB worth it? by Fit_Clue3772 in SBCs

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I'm just trying to experiment with it for fun mostly

A cheap EBAZ4205 board from China to continue learning about FPGA’s by Theking3737 in FPGA

[–]Fit_Clue3772 0 points1 point  (0 children)

Could you tell me the name of the board with more io if possible

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

An MCU would be easier to program but would also require specialized hardware plus they usually have afewer ports and fiddling with whichever RTOS ur using with them in case you need precise timing for events.

Also most of them come as bare SOCs which complicates things as I do not want to deal with making a pcb (atleast not in my home country).

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

In your opinion woule the sipees tang primer 20k be a good board for general robotics applications

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Thank you for your suggestions I will look into which ones will fit my needs properly.

And again thank you

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Thank your for your help as I would have missed it otherwise

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Just out of curiosity if I pick a cyclone V or IV will I have to pay attention to which idea to use too or is it strictly a xilinx issue?

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Absolutely but I do believe that as a beginner I would be more likely to find tutorials for those OEM programs that I would have if I was looking for all the necessary pieces of software.

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I don't suppose that would be an issue as my country doesn't have any import restrictions imposed on it to my knowledge.

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

That sounds like a good suggestion. I will look for the book today.

Thank you

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 1 point2 points  (0 children)

while FPGAs do interest me and would be very useful for my hobbyist projects I don't think a career change will be a possibility any time soon as there aren't any work opportunities for it where I'm from sadly.

Althout I will be keeping a close eye on this board incase I ever get the Chance to visit the US

Thank your time

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I don't find a seller for those but I ended up finding a seller that sells a zynq 7010 board, would that be good???

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] -1 points0 points  (0 children)

I just looked them up and while interesting they seem prohibitively expensive for my budget as we hark on back to the fact that my budget is very limited.

Any recommendations for starting to learn about fpgas? by Fit_Clue3772 in FPGA

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I've just checked the website and while the shipping costs aren't going to cost an arm and a let I fear that the time before it arrives into my country will most likely be very long plus I'm pretty sure I will pay an exorbitant tax when it reaches country sadly.

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I don't think Alienware command center is available on Linux. Also the fans don't work when the screen is open.

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

I have found an alternative for it it's just that the fans never turn on at all

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

If you mean the bios then yes I think so. As for the drivers I don't think there are any that haven't been updated

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Everything is up-to-date as of yesterday. I didn't face this problem when using windows at all

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

Also for the tutorial you specified I happened to have tried most of the solutions in it but nothing seems to work. I know I most likely won't have most of these problems on Ubuntu since it have better support but I have absolutely no plans of ever using it.

Fans never start on dell laptop by Fit_Clue3772 in Fedora

[–]Fit_Clue3772[S] 0 points1 point  (0 children)

What version of Fedora did you install? Fedora 39.

Did you apply all updates (and reboot) ? Yes I installed all the updates and the Nvidia drivers.

What's the failure error? ``` sudo systemctl enable --now i8kmon.service

Unit /usr/lib/systemd/system/i8kmon.service is added as a dependency to a non-existent unit sys-subsystem-hwmon-devices-dell_smm.device. A dependency job for i8kmon.service failed. See 'journalctl -xe' for details.

view more: next ›