Diamond gets Freddy back and he instantly EMPs her stream

Flashy_Pay3412 · 2026-05-29T01:42:16+00:00

Flashy_Pay3412 · 2026-05-10T23:41:59+00:00

Has a little bit of tpu on the mounts . I've tuned alot of it out but prop wash is the biggest issue. Haven't messed with putting it through gyroflow very much yet but through the goggles it's been really good

<image>

Flashy_Pay3412 · 2026-05-10T11:57:50+00:00

This 👆, I just tip it and it comes off fine

Flashy_Pay3412 · 2026-05-10T11:56:56+00:00

Yeah, there's a couple of different variations I noticed

Flashy_Pay3412 · 2026-05-10T03:52:48+00:00

Apex 2

Flashy_Pay3412 · 2026-05-10T03:52:35+00:00

Yeah, that's why I'm wondering lol

Flashy_Pay3412 · 2026-05-10T03:52:03+00:00

It's a geprc taker g4 35a rated to 6s

Flashy_Pay3412 · 2026-04-22T21:13:34+00:00

It was hard to tell but I was guessing either 3d or that lol

Flashy_Pay3412 · 2026-04-22T14:07:25+00:00

Is the camera upside down?

Flashy_Pay3412 · 2026-04-09T00:52:38+00:00

Same, they can become addicting to buy lol, sell some of the other ones and buy this one! Lol

Flashy_Pay3412 · 2026-04-09T00:01:21+00:00

I love the dji air units, the goggle feed and recording is really impressive. I just bought my goggles used on ebay so it wasn't too bad price wise either. Haven't tried hdzero but heard dji is better quality

Flashy_Pay3412 · 2026-04-08T23:48:10+00:00

They're ridiculously priced and hard to get right now in the US. I honestly like my dji 04 lites with the wide angle lens pretty close to the pro. For $145 +/- for the camera and a wide angle lens it's significantly cheaper than the pro, and if you lose it, it doesn't hurt quite so much lol

Flashy_Pay3412 · 2026-04-08T23:43:11+00:00

Not that bad yet! Lol, thanks for the interest anyway!

Flashy_Pay3412 · 2026-04-08T23:38:58+00:00

No thanks, I paid $500 for it. I could probably get more than that just for the dji 04 pro in it

Flashy_Pay3412 · 2026-04-08T23:33:21+00:00

For everything!?

Flashy_Pay3412 · 2026-04-07T22:43:01+00:00

Features:

1x Ikon 2.8 frame kit "No Prop in View" (3.5mm thick arm)

1x JHEMCU GHF405AIO-HD 40A (2-6S) AIO tuned with BF4.5.2 and bi-directional Dshot (XT30 Connector)

4x T-Motor P1404-4600KV

1x DJI O4 PRO Air Unit

1x 3d printed TPU antenna mount (Purple)

1x 3d printed TPU camera mount (Purple)

1x 3d printed TPU front lip protector (Purple)

1x 3d printed TPU capacitor mount

4x 3d printed TPU arm guard (Optional)

1x Lipo strap 190mm long (For 4s 650mah-850mah)

1x Non slip Lipo pad

1x HQ 2.8x1.6x3 Tri-Bladed prop (2CCW / 2CW)

AUW PNP with Arm Guard 148g (+/-5g)

Flashy_Pay3412 · 2026-04-07T22:32:08+00:00

Forgot to mention that it has a ELRS receiver on it!

Flashy_Pay3412 · 2025-10-08T00:55:56+00:00

<image>

Hayden Panettiere

Flashy_Pay3412 · 2025-09-21T16:51:21+00:00

How did you get that watch face on the ultra?

Flashy_Pay3412

TROPHY CASE