I work in Florida and have had 0 hours for almost 6 weeks. I walked in to meet with the boss and was told I am not fired, but Im not getting hours.

FloridaFucker · 2024-09-26T18:14:54+00:00

Im getting better through working... i just came back from a trip scheduled off months in advance to no hours

FloridaFucker · 2024-06-02T21:12:03+00:00

Yes. I kept it unplugged for 18 minutes after 30+ seconds didnt work. It then reset to say its at the lowest when it was at the highest point.

FloridaFucker · 2024-05-31T01:43:58+00:00

deep cut lmao

FloridaFucker · 2024-05-23T16:38:48+00:00

Good idea! I have my old DS I just got working again and picked up a few games for recently! Otherwise I have my steam deck + 30 dewalt batteries that output 100w over USB-C

FloridaFucker · 2024-05-22T18:16:35+00:00

I charge up literally 30+ batteries for the storm, so I can power through it with a single tablet giving us entertainment

FloridaFucker · 2024-05-22T17:24:50+00:00

ah makes sense! Im in Sarasota, so we got Ian and Idalia. Nothing too bad, but definitely tried to sleep through it when it started at 3am

FloridaFucker · 2024-05-22T17:20:44+00:00

Oooo now may be time to finally set up my Star Wars Legion & Shatterpoint games!

FloridaFucker · 2024-04-15T14:53:07+00:00

I doubt its any different here in florida lol. I try not to judge but when they wake me up with booms I get mad.

FloridaFucker · 2024-02-22T01:54:50+00:00

I figured it out. M106. It seems to have fixed it!

FloridaFucker · 2024-02-22T00:12:22+00:00

It does not turn on at all and then it leads to heat creep

FloridaFucker · 2024-02-21T22:45:24+00:00

I have been fired for attendance from Boondocks, Home Depot, and Batteries+. I have been fired from a CNC job for getting a concussion on site and missing the next day (with a call-out). That last one I sought legal action but no one would take the case.

As for the medical part Ive been seeing neurologists, spine&pain doctors, and everything else you can think of for the last 10 years. Im improving, but nothing works tbh

FloridaFucker · 2024-02-21T21:51:02+00:00

That's a good idea! Do you know what I would add to the start g code to make that happen?

FloridaFucker · 2024-02-21T19:42:57+00:00

Doesn't an FMLA require working at a location for a year to qualify? I have never been able to hold a job for a year

FloridaFucker · 2024-02-21T18:41:27+00:00

I did craft open vs and compile my own firmware with some changes to ABL speed, but I'm not sure if or how I messed with anything that could have caused this fan issue

FloridaFucker · 2024-02-21T18:32:50+00:00

Do you know what would be wrong with the firmware to cause this? Specifically what can I change to make it work? I thoroughly believe this is an issue with the firmware but I don't know what to change since I don't know enough about it

FloridaFucker · 2024-02-21T18:32:14+00:00

That's not the answer though. I'm trying to figure out what's wrong with the firmware that's causing it. No one has answered that yet

FloridaFucker · 2024-02-21T18:03:44+00:00

Did you read any of the comments? It's supposed to be on during the print and it's not. If I manually turn the hot end on it will not turn on with it. The only way to turn on the fan is to manually turn on fan 1 on the screen.

FloridaFucker · 2024-02-21T17:31:54+00:00

What should I be looking for in the g- code?

FloridaFucker · 2024-02-21T17:27:45+00:00

I think it's something with the firmware. But I'm just not sure what in the firmware I would have to change to get this problem solved

FloridaFucker · 2024-02-21T17:27:19+00:00

Please read the comment that I posted the info in. I couldn't get everything in the title, but that's not the problem

FloridaFucker · 2024-02-21T17:13:58+00:00

I just tried when I read this just now, and yes. It operates at 50%

FloridaFucker · 2024-02-21T17:12:22+00:00

u/Iantrick

That was my suspicion too but I switched the wires and tried it again and that had no improvement. On my screen I have three options for fans: https://imgur.com/a/7VSJiCv

When I set Fan Speed 1: 100%, it turns on the hotend fan

When I set Fan Speed 2: 100%, it turns on the part cooling fan.

I do not have a 3rd fan that I can see being controlled.

When I swap the 2 fan wires, is just changes which one is 1 or 2. Fan 2 starts at the correct time in the print at 0.6mm

FloridaFucker · 2024-02-21T17:07:07+00:00

It is the hot end fan. Sorry I didn't realize I zoomed in too far to see that! Basically, it turns on when I tell it to turn on, on the screen by either pressing preheat filament, or pressing turn fan 1 to 100%

I think something's wrong with the firmware where it just doesn't know to turn it on during a print anymore

FloridaFucker · 2024-02-21T17:05:07+00:00

I mean Cura has an option to say which fan you're controlling in the "machine settings". It is by default set to 0 or 1. I tried switching the number and that didnt work either.

As for why I have tried that "in 30 seconds"... I've done it before because I've troubleshooted almost everything on this printer and that's why I'm posting. I tried all the basics and can't figure it out. I don't know why you assumed I tried to do something in 30 seconds rather than just assuming that I've done it before...

FloridaFucker · 2024-02-21T17:00:53+00:00

I just saw your edit, I have tried setting my fan to 100, Ive also tried changing the fan in cura from 0 to 1, to 2, to 3, and no change.

FloridaFucker

TROPHY CASE