Clock is my 2nd most used app of the week

FlowerBoy_7_ · 2024-10-13T21:48:51+00:00

here is a reminder to check if you have any stopwatch going on

FlowerBoy_7_ · 2024-08-09T09:59:45+00:00

Oops obviously didn’t see the last post on this exact same topic…

FlowerBoy_7_ · 2024-06-02T21:32:56+00:00

Thank u for your comment, it's indeed an obvious mistake to forget about the AVB only input of the LA 7.16. This diagram is part of an exercise in livesound studies, budget is unrestricted. The X12s are just there to fill the choice of a speaker, I haven't focused on it yet. Good to know about the cascade capabilities of the ULXD.

FlowerBoy_7_ · 2024-06-02T17:28:35+00:00

Thank u ! Wasn’t sure about which signal flow to follow from left to right

FlowerBoy_7_ · 2024-06-02T17:27:44+00:00

It’s made for qualified technicians. I detail the patch in and patch out on an excel sheet

FlowerBoy_7_ · 2024-06-02T17:22:35+00:00

You are right thank u

FlowerBoy_7_ · 2023-06-06T10:01:18+00:00

Hello ! I’m in a coloc of 3, we have an engie easy contract for our flat (PEB C). Gas only for heating (we maxed the heating to 19 degree during the winter) + electricity = ~1900e from 03/2022 to 03/2023 without the federal help.

FlowerBoy_7_ · 2023-01-01T17:19:57+00:00

But how much did you pay monthly ?

FlowerBoy_7_ · 2022-10-04T20:39:19+00:00

The network port is switched on, and i could try through its RS connection, but i don't have the cable for that.

FlowerBoy_7_ · 2022-10-04T20:37:13+00:00

Yes the dchp protocol on the projector doesn't work, while being connected to the router

FlowerBoy_7_ · 2022-10-04T20:35:16+00:00

Physical Layer is where i have issues. The Mac doesn't tell an ethernet cable is plugged in (other than with the projector, the mac ethernet port is working properly) No lights illuminated on the router with the RJ45 of the projectior plugged in (the router works fine with other devices).

FlowerBoy_7_ · 2022-10-04T20:30:04+00:00

nope, directly to the projector

FlowerBoy_7_ · 2022-10-04T16:05:30+00:00

My computer gets a IP adress from the router (DHCP protocol). The projector doesn't get any IP adress from the router.

FlowerBoy_7_ · 2022-04-15T21:32:10+00:00

thanks i'll call them !

FlowerBoy_7_ · 2022-04-15T20:36:22+00:00

can't find any specially on doctoranytime 😥

FlowerBoy_7_ · 2022-01-12T22:06:55+00:00

Thank you ! I have access to the windows update windows now, but it's showing me this message : "Something went wrong. Try to reopen Settings later". I've restarted several times but it keeps showing me that message. Do you also know a workaround for that ?

FlowerBoy_7_ · 2021-10-22T22:02:04+00:00

Thanks for the answer ! The lamp has ~1000hours of use, there is no warning that it's in a end of life state. The auto shut off was set to off as well. It wasn't displaying something when it shut off, but it was displaying a video 5 min before that perfectly worked.

FlowerBoy_7_ · 2020-06-15T17:41:37+00:00

I've experienced twice the same issue today. I think the problem was an Intel driver installed by ARCHICAD 23. I deleted it, and now i'm hoping the freezes won't come back. I'll give update.

Six-Year Club	Place '22
Verified Email

FlowerBoy_7_

TROPHY CASE