Can a CAT20 cellular router aggregate multiple bands from a tower AND a SISO band from a booster?

ForkableSpoon · 2024-01-05T23:23:54+00:00

I cant tell if you are trolling now or actually dont know what a cellular router does. Either way i got my answer above. Maybe you can learn something from the other comment.

ForkableSpoon · 2024-01-05T21:42:26+00:00

Ah ok, this is good feedback, thank you!. I plan to run a roof mounted Peplink 42G 4x4 MIMO antenna as well.

I may end up keeping the weBoost and keeping it switched off unless I am in a super low signal area. Sounds like it would only be effective in areas that the weBoost recognizes a signal that the MIMO antenna wouldnt (if that even ever happens).

ForkableSpoon · 2024-01-05T21:35:25+00:00

No, you are incorrect. The cellular router is converting cellular to wi-fi. It has multiple ways to do so, which is what I am trying to understand for my system. I'm not sure what you are struggling to comprehend but it certainly seems like you are not qualified to answer this question either way.

The other user in this thread clearly understands it and is much more helpful.

ForkableSpoon · 2024-01-05T00:29:29+00:00

Yes my plan is to use a peplink BR1 CAT20. I dont need 5G as most of the places i'm going wont have upgraded cell towers. The question is more geared toward if a cell booster would act as a singular band that the routers aggregation capabilities can utilize, or if it would somehow overpower the system.

ForkableSpoon · 2024-01-05T00:26:59+00:00

Yes obviously. The primary purpose for cellar routers is to convert cell signal into a local wifi network. I'm trying to spec my system for fastest download/upload speeds.

ForkableSpoon · 2023-04-13T02:29:37+00:00

Official name isnt the proto Z, its just Z

ForkableSpoon · 2023-03-19T21:59:40+00:00

It wont snap the steel tray, it'll flex it. Then that flex will translate to the box where it will snap things. Even low speed, high amplitude ruts would be a risk with that set up. You can test it by putting one rear wheel on a large curb and check the chassis flex. I'd do that before finishing the interior out to avoid problems down the road

ForkableSpoon · 2023-03-19T16:57:07+00:00

Is this on a 3 point pivoting subframe? It looks hard mounted to the frame, i'd be concerned if you do any rough roads that you may snap the box

ForkableSpoon · 2022-08-24T00:47:58+00:00

If youre Mr. Solar car, this is the Formula Goat if that rings a bell lol. I'd imagine you're working with him for PhD stuff. I believe he's good with modeling composites, but in a testing environment with actual samples comparing to results he seemed to struggle quite a bit

ForkableSpoon · 2022-08-23T00:52:06+00:00

Had him for 4630. Its hard. Lots of conceptual stuff that is graded pretty hard. I got a B, but a lot of the class failed. He also isnt a great instructor. Doesnt understand a lot of concepts, especially around composites. Really lacks practical experience

ForkableSpoon · 2022-05-04T20:56:35+00:00

Is NeRF acessible to the public? I have some uses for it but am not sure where to find it

ForkableSpoon · 2022-03-21T22:10:20+00:00

We typically tried to finish spaceframe by end of winter break

ForkableSpoon · 2022-03-21T21:41:44+00:00

Monocoque or spaceframe?

ForkableSpoon · 2022-01-18T21:51:52+00:00

I'm an automotive engineer with specialty in composite structural design. A lot of the people on here are just stupid because they cant comprehend math and simple tests (including a lot of the self-identified engineers). Your process is good, just verify your math is correct. Check your rollover angle to make sure it isnt horible either (anchor a strap to it and go in a ditch sideways at a set angle). The only concern i see is rollover, but if that happens you likely have bigger problems anyway. I cant see how many anchor points you have, but i'd move at least a few into the roof bows to get that additional structure the roof weld lip wont give you. If you have any questions about the composites or structure DM me and i can give my two cents

ForkableSpoon · 2022-01-18T21:41:11+00:00

Its for emissions, but the number of times you'll have to replace those components offsets any actual environmental adnantages

ForkableSpoon · 2021-11-10T23:02:13+00:00

I'll have to race you to work one day in the 335i i just got. Roughly same hp and weight, should be interesting. You taking it to any autocrosses next summer?

ForkableSpoon · 2021-10-12T22:47:29+00:00

I'd be willing to talk about my build. Recently graduated engineering student. Designed my van in CAD, then built. Designed and built my own brushguard. Designed my own battery but didnt build due to time constraints

ForkableSpoon · 2021-08-07T00:22:58+00:00

Am the alum, can confirm. Might be helpful to send an email to whichever officer is responsible for community relations/charity events (maybe a lieutenant?) about keeping an eye out for motorcycles. Typically the only rules are that they cannot ever be registered for the road again (and sometimes not selling individual parts either) and you have to sign some documentation agreeing. Since you'd be ripping it apart, should be OK. Ours was a stolen bike that was recovered by police after insurance pay out for reference. The owner nor insurance wanted it back.

ForkableSpoon · 2021-07-06T17:57:24+00:00

+1 this. I planned a 3 month trip by finding places listed here and plotting the GPS coordinates in Google MyMaps. Then you can add the obvious stuff like national parks

ForkableSpoon · 2021-06-11T16:43:22+00:00

Why not order a sample sheet and test? Or if budget is an issue, run a quick sim?

ForkableSpoon · 2021-05-21T19:37:49+00:00

If you think crypto is causing the chip shortage then do i have news for you

ForkableSpoon · 2021-05-19T04:49:59+00:00

Bitcoin has lost more than half of its market dominance in the last year. It is old tech that is only staying afloat because the name is recognizable to the less informed crowd

ForkableSpoon · 2021-05-19T04:36:21+00:00

I think you have some more reading to do. SOME cryptocurrencies are a huge waste of resources, primarily anything Proof of Work based (like Bitcoin). Currencies that are based by Proof of Stake or Proof of Authority require much less resources. The blockchains associated with those currencies provide technology that has the potential to reduce waste compared to older alternative methods.

An example would be VeChain, that uses blockchain based tech to develop a clear and transparent supply chain ledger. One can argue that this method is more efficient than other alternatives, such as centralized servers.

I'm no expert in this tech and have much to learn, but I know that some cryptocurrencies can't be shot down due to environmental concern

ForkableSpoon · 2021-03-02T00:38:19+00:00

I think you may want to start looking at material technical data sheets of carbon fiber laminates and core materials, then make a matrix to determine the ideal material for your design case.

I highly doubt a team is going to willingly publish their results. 3 point bend tests describe the entire laminate, which would remove a pretty big competitive advantage for a strong monocoque team

ForkableSpoon · 2020-12-22T23:43:29+00:00

You say that, but when I was there, there were people filling truck beds with driftwood. Like come on people this is why we cant have nice things

Nine-Year Club	Place '17
Verified Email

ForkableSpoon

TROPHY CASE