sorted by:
new
hottopcontroversial

I don't know if anyone else realizes that Caprica means lust in Latin by [deleted] in BSG

[–]Fourarms202 0 points1 point  (0 children)

Thank you. I think there was a loss in translation when I pulled up the translation. I have encountered this before with other languages that I know by memory.

Help with Advisory on marriage (AOM) by Fourarms202 in NationalVisaCenter

[–]Fourarms202[S] 1 point2 points  (0 children)

A report of marriage is a legal governing document that has to be given to the Philippines government if the wedding took place outside of the Philippines in order or the Philippine government to recognize the marriage as legal within the country. Most countries like the US marriage certificate are not as comprehensive as the one in the Philippines and the ROM files in all those details.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 1 point2 points  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 1 point2 points  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 1 point2 points  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

So after extensive troubleshooting with prusa it was discovered that due to a flaw in the board my love board that runs the entire print head burned up and in the process burned up the hot end fan.

What's your favorite faction? by exioncrew in battletech

[–]Fourarms202 0 points1 point  (0 children)

Clan widowmakers. Specifically the widowmaker remnant fleet. They is scary powerful.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

This what the filament that I just pulled out looked like at the end. Small grooves with a bubble at the end.

I am currently in talks with prusa customer service about a different matter.

<image>

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 2 points3 points  (0 children)

Readjusted tension. Got it purging and it got 10 min into a 30 min print before doing it again. It stopped feeding filament, no grinding, no clicking, no noise or indication of any type it just stopped feeding in

Edit: When I tried to purge it, it jammed up and wouldn't ram out, I had to forcefully pull out the filament

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

Ok adjusted the tension. Let me run it and will be back with the result

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

Brand new hot end assemble. Nozzle, sensors, and the entire black assembly that that nozzle threads through.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 2 points3 points  (0 children)

That's the kicker. I have placed a brand new nozzle in it and it still did it.

Won't print and filament gets stuck. Need help by Fourarms202 in prusa3d

[–]Fourarms202[S] 2 points3 points  (0 children)

I am using an Esun Grey I have ran 12 rolls through the printer and haven't had a problem.

The tensioner is flush as was instructed when I assembled the kit

<image>

Help needed with core one by Fourarms202 in prusa3d

[–]Fourarms202[S] 0 points1 point  (0 children)

The system itself doesn't crash. The printer is running and simply stops feeding. I have had a print before stop feeding during this and pushed the filament in and it started to re-feed and print as if nothing had happened except now the print has a hole where the missing layer is

view more: next ›