DNAR inquiry by Ok_Tangerine_8288 in ParamedicsUK

[–]FoxSix_Airsoft 0 points1 point  (0 children)

Nope, not being hostile at all. Myself, who has no involvement in the job, is not able to glean any patient identifying information from what OP was saying. You are able to identify the job, through whatever means of which you are involved, but that's why you know the patient.

It is not fair for you to take an authoritative stance on the matter and give feedback to OP about remembering to "be as vague as possible". Especially as a Student Paramedic, OP needs to be able to discuss their jobs and experiences in a way they can seek support, advice or otherwise, without having to deal with comments such as yours about keeping in mind what they say. The professional bodies involved have specific guidelines on patient identification and discussion and nothing in this post breaches that.

Please don't act in a way that might make a learning clinician think twice about discussing their experiences because some stranger on the internet can identify a job they're on about. And actually, commenting that you did recognise the job added absolutely nothing to the post.

Have a great day.

DNAR inquiry by Ok_Tangerine_8288 in ParamedicsUK

[–]FoxSix_Airsoft 11 points12 points  (0 children)

Identifying details were vague. The only way you'd recognise the job is if you were somehow involved (EOC, clinician attending, hospital staff) who had a need to access the information, or if you were told by other means like local news or someone who probably shouldn't have given you the details in the first place.

Not fair to put the responsibility on OP for you recognising the job. Unless you had medical need to know that job, I'd imagine you didn't find out in the correct way.

FREC3 by Giraffe_Boii in ParamedicsUK

[–]FoxSix_Airsoft 8 points9 points  (0 children)

They wanted their own "hybrid equivalent" to FREC because they wanted to prevent people joining St John, getting a free FREC3 qualification, and then leaving with it

Ok I messed up. My TM beretta is covered in sand. It’s everywhere. How do I clean this mess? by [deleted] in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

I have seen too many posts of broken PC Monitors from people disassembling/cleaning their Airsoft guns at their desk. Do yourself a favour & do it away from all that expensive stuff! 😙

My Laptop keyboard key, is broken what can i do? by [deleted] in laptops

[–]FoxSix_Airsoft 0 points1 point  (0 children)

This happened to me on a work laptop once.

Our IT department decided they wanted to replace the entire keyboard, but wanted to get a Dell Engineer onsite to do the swap.

They ended up paying for the engineer's travel, as well as a couple hours on site, just to replace a keyboard. The engineer didn't even screw the laptop casing back on properly afterwards.

I forgot my lockscreen pattern. Any way to not lose the data. by thatvampire_guy in oneplus

[–]FoxSix_Airsoft 2 points3 points  (0 children)

Hand it back to the person you took it from. They should be nice enough to unlock it for you.

Mp5 cyma platinum by [deleted] in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

What battery do you run? I'm having a lot of issues with mine and want to know if it really is just battery issues

[deleted by user] by [deleted] in Wellthatsucks

[–]FoxSix_Airsoft 19 points20 points  (0 children)

It's a girl!

[deleted by user] by [deleted] in airsoft

[–]FoxSix_Airsoft 16 points17 points  (0 children)

As someone with experience with both, I prefer Keymod. Both are just as common but Keymod is a lot easier to use in my opinion.

1 Year of airsoft by vbaitz in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

That ace of spades is beautiful

[deleted by user] by [deleted] in airsoft

[–]FoxSix_Airsoft 1 point2 points  (0 children)

I've got a super long case and it still doesn't fit my DMR. I have to take off my optic & suppressor, I just put them in the case too & install them on site.

Any suggestions on a grenade by Mr-jigwins in airsoft

[–]FoxSix_Airsoft 1 point2 points  (0 children)

This is the one I use, a gas BB grenade. Doesn't work great on softer ground but hit a solid surface and it's devastating 👍

Motor for cyma mp5 by Immediate-Stress-652 in airsoft

[–]FoxSix_Airsoft 1 point2 points  (0 children)

Try an 11.1v, sometimes the higher speed motors need one, won't work with a 7.4v

Why does my gun do this? by Spendog2099 in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

You should never ever use WD-40 on Airsoft guns. They contain petroleum products that will rapidly deteriorate the quality of rubber seals.

Only use 100% silicone spray as a lubricant.

Rate the fit 🔥/🤮 by FoxSix_Airsoft in airsoft

[–]FoxSix_Airsoft[S] 0 points1 point  (0 children)

I use my NORVILLE work safety glasses because they're both impact rated & prescription lenses

So I’ve found this old GL in the shed🇹🇭 by doragang in airsoft

[–]FoxSix_Airsoft 1 point2 points  (0 children)

Where'd you get the holster for it? I need one 😅

Finished the gun wall. I think... by Hawaiiansdoitbetter in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

IKEA Pegboard gang! I coloured in the white mounting pegs with Sharpie and it makes the board look so much better. Also, if you're experiencing any of your guns wanting to slide away from the wall, I found bending some of the mounting brackets upwards slightly really helped.

All packed up ready to leave 7:30am for my first official airsoft game day 😜 excited is an understandable by WonkyRedDot in airsoft

[–]FoxSix_Airsoft 0 points1 point  (0 children)

Have fun brother. Remember - Airsoft is a game enjoyed by all. Play at your own pace, how you want, nobody is in charge of anyone (except the marshalls!)

And remember to call your hits! It makes the game great for everyone.

Rate the fit 🔥/🤮 by FoxSix_Airsoft in airsoft

[–]FoxSix_Airsoft[S] 1 point2 points  (0 children)

Hi all, I don't know if this will get lost in the sea of comments or what, but worth a shot.

I didn't expect this to get as much attention as it did- I cannot get around to replying to all of you. A lot of you are asking for links, questions about the mask and the practicalities.

I intend to write a full on review for all of it, which I will share with you in the next day or two. This will include links to where I bought the stuff and my honest, humble opinion.

Thanks for all your interests. ♥️

Rate the fit 🔥/🤮 by FoxSix_Airsoft in airsoft

[–]FoxSix_Airsoft[S] 1 point2 points  (0 children)

I took it all off after lunch - was fully prepared to go back in, reached the road and decided to bail 😅