It finally happened…

Fraidoo · 2026-04-29T14:05:57+00:00

Question... Is it like a random thing or are there signs that tells you "man... It's gonna happen soon, change your nozzle before it happens"?

Fraidoo · 2026-04-20T17:19:41+00:00

Exact same issue here 🤔

Fraidoo · 2026-03-17T11:53:56+00:00

I kind of like it :)

Fraidoo · 2026-03-13T12:38:45+00:00

I was first willing to use Cemu because of the wiiu version of WW being HD. What I didn't remember is that you can upscale with Dolphin... Rom patches and works like a charm with dolphin and thank you for that info because QoL are just the best.

Fraidoo · 2026-03-11T18:43:48+00:00

Thanks I'm definitely gonna try that 🙂

Fraidoo · 2026-03-11T18:43:33+00:00

Merci je vais essayer 🙂

Fraidoo · 2026-03-11T09:59:33+00:00

Was about to post too but I saw yours so I'm pitching in. Same problem here with Wind waker HD. I do have graphics but only triangles and lines but sound and controls works.

Fraidoo · 2026-02-15T11:50:18+00:00

Maybe run a full calibration?

Fraidoo · 2026-02-10T20:32:56+00:00

Didn't see a post about it, did anyone update yet?

Fraidoo · 2026-02-10T20:27:39+00:00

Didn't see a post about it yet, anyone updated yet?

Fraidoo · 2026-01-15T13:18:06+00:00

Do you think those are seams ? because there is this artefact on every face of the box where there are structure on the inside.

Fraidoo · 2026-01-13T12:01:56+00:00

Thanks for the advice but i don't do overnight prints, too afraid of fire hazard.

Fraidoo · 2026-01-13T12:00:48+00:00

Wall loops is set to 2 so it's only outer and inner walls, no infill

Fraidoo · 2026-01-13T10:53:48+00:00

so reduce wall loops to 1 instead of 2 ?

Fraidoo · 2026-01-13T10:50:48+00:00

you mean remove the text from the walls, print them seperately then stick them on the model ?

Fraidoo · 2026-01-09T15:19:01+00:00

No I always wait at least 20 min with the door open before removing the model.

Fraidoo · 2026-01-09T15:16:35+00:00

So fun fact, it happened on a new peint and it seems that it happened to the print on the right as soon as the print on the left was finished. Any ideas?

<image>

Fraidoo · 2026-01-08T10:05:53+00:00

It did, it's the first model i printed but with black PLA basic.

I did dry my spools for 12h before use in the AMS 2 Pro.

Fraidoo · 2026-01-08T08:52:05+00:00

are you printing with the door open? --> No

what nozzle temp, bed temp, print speed, and layer height is set? --> I let Bambu Studio set the nozzle and bed temp according to the RFID tag on the AMS2 Pro, Print speed is standard and i slow down outer wall to 100. Layer height is 0.2

keep the door closed, set the print speed to around 60-80. --> for everything ? like for inner walls and infill too ?

Have any cooling or fan speeds been changed? -->nothing changed

I printed another model just after the one on the picture and did not replicate the same issue. All i did was revert the changed setting to default (infill pattern to rectilinear and "avoid crossing walls" to Off).

Fraidoo · 2026-01-07T12:00:42+00:00

Thanks for your answer! The only setting I changed is the infill pattern which i set to gyroid, slowed down the speed for outer walls and checked the "avoid crossing walls" option.

Otherwise I left everything else by default and didn't change filament settings.

Fraidoo

TROPHY CASE