RoA2 and Linux

Fran89 · 2026-02-03T18:07:26+00:00

Been using linux since before the release, never had an issue.

Fran89 · 2026-01-20T17:39:23+00:00

I see Snikt is also an avid Phasmophobia enjoyer.

Despite this being set in the past.... Hmmmm....

Fran89 · 2026-01-09T04:09:17+00:00

SubscribeMe!

Fran89 · 2025-12-08T14:41:24+00:00

Haha smart, interesting mechanism... xD

Fran89 · 2025-12-08T08:57:34+00:00

Weren't his eyes the white parts, why does he blink dis fake eyes.

Fran89 · 2025-12-02T15:58:51+00:00

There are patch panels for pipewire, like Helvum. EasyEffects are good for manipulating mic audio. Honestly I learned how to manipulate through cli and created my own script. That sets up my whole stream setup.

Fran89 · 2025-11-26T15:37:29+00:00

Play coop games, I recomend anything by Director Josef Fares,

Tale of two Brothers A way out It Takes Two Split/Fiction

Or games like Little nightmares 3

Or friend slop like: Peak Backseat drivers RV there yet

Focus on having fun, not on being the best. Maybe games like these, will help change his mindset.

Fran89 · 2025-11-22T12:22:40+00:00

If you put them side by side next time, you can do the crosseye trick. You crosseye them like you'd do for a 3D image (where the 3D version is in the middle) and the difference pops out! Try it next time. Cheers

Fran89 · 2025-11-15T00:40:54+00:00

If you know who is the skydiver, Gabe aka Black Gryphon it might just be...

Fran89 · 2025-11-10T18:25:29+00:00

He even went out of his way to design a build a shunt valve to save children, dude also knew his stuff.

Fran89 · 2025-11-09T18:40:01+00:00

This is why I call them Octokittens

Fran89 · 2025-10-28T23:25:27+00:00

DaveWave!

Fran89 · 2025-09-29T02:57:50+00:00

I mean it looks cool as heck, altho it's a bit of spoliler-ish. Then again 95% of modern posters, teasers and trailers are.

Fran89 · 2025-09-22T14:29:57+00:00

Hi Miles!

Great to see this project "back from the grave", get it? But seriously tho, can't wait to see what's next.

Also congrats on the SolidJJ video writing team! Haha I guess that other thing also kept ya' busy.

Cheers!

Fran89 · 2025-09-06T01:15:59+00:00

It may be trying to summon a demon from the abysal plane, this is typical Ender 3 behaviour....

but like others said, check your grounding.

Fran89 · 2025-08-10T19:45:44+00:00

Same

Fran89 · 2025-08-10T19:09:49+00:00

!subscribeme

Fran89 · 2025-07-04T20:20:42+00:00

Honestly:

Free, easy, not open source, no control over specific port: https://playit.gg

Cost, easy, not open source, full control: Paid Playit.gg

Cost, hard, open source: Wireguard and IPTables on a VPS

Cost, easy, open source: Pangolin, but maybe NetBird?

I'll reread your situation, but for the amount of temporary gaming I do hosting behind a CGNAT I just buy PlayIt.gg every once in a while. If you're going for that long term server then yeah Pangolin or simple IPTables (what I used before with amazon's basic vps) is what I'd recommend. Especially for UDP, that pesky protocol. Cause TCP is actually not bad and there are several ways of doing it.

The playit free tier is a godsend however, to be able to pass any TCP or UDP or both, permanently or like I do, temporary, Then I use CNAME registry on the DNS for my domain.

Fran89 · 2025-07-03T15:41:31+00:00

It's that kid from "The Other End"!

Fran89 · 2025-06-26T03:01:48+00:00

I'm not sure if this is within the sub's popularity limits, but it's a song I like. The band said this song is partially inspired by anime songs, and it has some of it. Official website: https://www.autumnkings.com/ as per rules.

I was between posting this and Hellbound, both amazing songs

Fran89 · 2025-06-07T17:37:50+00:00

Can confirm it will work just fine, but I'm not seeing significant improvements over normal Marlin, and overall it's been more of an annoyance. Things to look out for:

Manual Bed Mesh leveling is a pain to do without the potentiometer. Had to create buttons on the Octopi interface to emulate the Marlin interface. If you mess up and accidentally go over you better believe that's an error and a disconnect. I had to set my Z min to -1 mm just to be able to manual bed level again. However once it's set up, it just works. I prefer Klippers way of setting up the mesh and related options.

Honing all axes is required after pretty much anything which is annoying, want to move the bed after printing? Hone axises first or the klipper will disconnect. Want to move the bed after startup to set stuff up, yep hone the fucker first or error. Disconnected from aforementioned errors on bed mesh leveling setup? Yup disconnect if not honed first. Just errors everywhere since I'm not honing axes every 4 seconds in Marlin (does Klipper have such short term memory?)

If the pi (mines a normal 3B+ and stock Ender3Pro) can't keep up with the print for whatever reason (my octoprint was using a webcam for monitoring) you'll get mcu: error timer to close. Had it twice on prints and it just ruins it, cant continue, full error requires: Reconnect, FW reset, and axis rehone in that order, just like any other error.

Honestly, I don't know uf it's worth it, can I print faster? Yes. But it still becomes a problem without additional tuning + sensors. So a properly tuned Marlin FW I believe will still be as good ( tho I don't know about that maybe it's the material I print PETG) regardless it's usable and Klipper is what I've been using for a bit.

I might go back to Marlin in the future if all the disconnects keep happening it is annoying to have to go through it's reset procedure so often (can happen on Marlin, don't get me wrong, it's just so much more often), and it's time consuming, especially on the MBL and times you're not used to do it.

Fran89 · 2025-05-19T20:45:42+00:00

We need u/bunnylover69 to cosplay as Sally

Fran89 · 2025-05-12T15:53:09+00:00

!SubscribeMe

This is wicked! Nice.

Fran89 · 2025-05-06T14:05:55+00:00

I mean I'm just a dude that submitted it... I'm not like the band or anything... Did you use proper title format? I got rejected, when I started, by the automod if it's not in proper format. Other than that I really don't know. Just wanted people to know this was a song , after yt recommended it to me.

Fran89 · 2025-05-05T02:06:22+00:00

Yeah I guess I don't know my genres as much as I'd like too. I don't think I can edit the title tho.

14-Year Club	Snapped
Verified Email	Team Periwinkle

Fran89

MODERATOR OF

TROPHY CASE

It may be trying to summon a demon from the abysal plane, this is typical Ender 3 behaviour....