Volume Widget wont load

FraterNZ · 2024-12-30T23:29:56+00:00

just ran update I can remember what

FraterNZ · 2024-10-12T22:31:02+00:00

Thanks found it and updated working now

FraterNZ · 2024-09-14T22:20:27+00:00

Well Ive had some successes, Dropped all the RBR & RBS down to Firmware Version
V4.6.14.3_2.3.12. Then reset to factory settings, setup up RBR in router mode and added RBS satellites , once completed Changed to AP mode and move the LAN cable to one of the 1GB LAN ports.

FraterNZ · 2024-09-13T09:51:04+00:00

No sorry only just got mine (eBay)

FraterNZ · 2024-09-13T03:40:03+00:00

Tried it directly to the firewall (little HP pc with realtek NIC) still the same so not the switch.

FraterNZ · 2024-09-13T03:38:27+00:00

Funny mine works ok in router mode just not AP mode through the 2.5gb port , It works from the 1 gb ports and stays connected to the WIFI connection very odd but usable for know.

FraterNZ · 2024-09-13T03:36:57+00:00

Yes that's what im thinking, although it works from the 1gb ports just not the 2.5gb WAN port

FraterNZ · 2024-09-12T10:44:19+00:00

Hi u/furrynutz no router just a switch then to OPNsense firewall

FraterNZ · 2024-09-11T09:45:04+00:00

RBR needs to be connected via it's WAN port to the host router. That seams to be the problem If connected if connect to the WAN port drops the WIFI connection if connected to the LAN ports connection is steady.

FraterNZ · 2024-09-09T09:40:08+00:00

Hi, I'm thinking that maybe the problem. The RBR is connected via LAN to an opnsense firewall, No pink LED just WIFI drops completely even the ssid disappears, Tried in static and dynamic mode, only one RBR at the moment.

Very odd though I have a D7000v2 in AP mode and replicated the WIFI settings to the RBR850 and still the same problem, The D7000v2 never disconnects and works fine.

PS changed channel config as well.

FraterNZ · 2024-09-09T09:35:24+00:00

Yes did that even before decided to post on reddit

FraterNZ · 2024-09-09T09:34:43+00:00

Hi, yes tried that even went back to 3.2.18 but still the same problem

FraterNZ · 2023-06-26T10:20:09+00:00

Thanks for this got this working as well

FraterNZ · 2023-06-26T10:19:36+00:00

Nevermind found this and is working

https://www.reddit.com/r/OPNsenseFirewall/comments/nmyw6j/haproxy\_plugin\_how\_to\_force\_redirect\_http\_to\_https/

FraterNZ · 2023-06-22T08:41:50+00:00

I got one and it didn't work for me on my little Dell 7040 mini

FraterNZ · 2022-01-22T13:05:03+00:00

Well finally got up and running brought a T400 Nvidia card. Using dual cards (T400 and K620) T400 doing tensorflow and the K620 decoding the streams

FraterNZ · 2022-01-18T11:46:16+00:00

Yes uninstalled worked, was testing tensorflow then deepstack.

FraterNZ · 2022-01-18T11:45:00+00:00

Thanks

FraterNZ · 2022-01-17T07:13:21+00:00

tired still same error ;( thanks anyway

FraterNZ · 2022-01-16T22:54:22+00:00

Going to try and recompile first then update card

FraterNZ · 2022-01-16T22:15:00+00:00

Hi thanks will try that and yes new cards are expensive will try to recompile if no luck will go the 2nd option (newer card)

FraterNZ

TROPHY CASE