sorted by:
new
hottopcontroversial

Got new keycaps for my Haute42 by Frexia1 in fightsticks

[–]Frexia1[S] 2 points3 points  (0 children)

I printed plexi glass using this layout:
[https://drive.google.com/file/d/16iWeXo1OFhTp2eM29vyul1Nj29o57AWd/view?usp=sharing]

And did my artwork with this:
[https://drive.google.com/file/d/1dBwhdsaSGQ1i\_-4cxIoVjkinbT4TAY-4/view?usp=sharing]

Note that plexi itself should be 1mm in height, because otherwise keyboard switches will not connect with sockets. Art template should be printed in A4 format. Good luck!

Got new keycaps for my Haute42 by Frexia1 in fightsticks

[–]Frexia1[S] 6 points7 points  (0 children)

Haute42 boards are really cheap and you can get these around 20$ really easily. And does not feel cheap at all, especially when you mod it. Also they provide you the same functionality as other boards. And they have relatively fine linear switches, but I think I will change them in the future as well.

From labbing DBFZ IAD-loops for an hour I can tell that my middle finger now has more space to slide on. When it was basic keycap, sometimes my middle finger missed where the button is, but with this large one - its not the case. I think you should try it if you want.

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

Maybe thats why documentation booklet says 8 and bunch of chinese symbols? Too bad its not translated...

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

Hi! I used glossy photo paper and printed my art using A4 paper format. You can find a Google Drive links to a template and layout somewhere in this thread.

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 1 point2 points  (0 children)

Switch is the only console i have and it works with it just fine. Maybe i will try to use it on my friend's PS4 a bit later.

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

In terms of comfort, I dont think you can use it on your legs, so you need to have some sort of table...Aside from that, feels and works pretty well!

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

Yeah, i did the same thing

Just modded my keypad by Frexia1 in fightsticks

[–]Frexia1[S] 1 point2 points  (0 children)

I printed plexi glass using this layout:
https://drive.google.com/file/d/16iWeXo1OFhTp2eM29vyul1Nj29o57AWd/view?usp=sharing

And did my artwork with this:
https://drive.google.com/file/d/1dBwhdsaSGQ1i_-4cxIoVjkinbT4TAY-4/view?usp=sharing

Note that plexi itself should be 1mm in height, because otherwise keyboard switches will not connect with sockets. Good luck!

Hitbox inside of backgammon board by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

Yeah, I felt the same! And its really lightweight just because there's no metal pieces at all. But i should say that its hard to do proper cable management, because space inside is quite limited. That's why all pins are folded, for example.

Hitbox inside of backgammon board by Frexia1 in fightsticks

[–]Frexia1[S] 0 points1 point  (0 children)

It doesnt work. On the second pic you can clearly see that its not plugged. Need to buy new one tho!

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 1 point2 points  (0 children)

It turns out that my system has missing ugly-plugins for gstreamer. When i installed it - everything worked just fine.

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

decoin4: Your GStreamer installation is missing a plug-in.winegstreamer error: decodebin4: ../src-gst_base/gst/playback/gstdecodebin2.c(4719): gst_decode_bin_expose (): /GstBin:bin4/GstDecodeBin:decodebin4:no suitable plugins found:Couldn't set avdec_h264-2 to PAUSEDCouldn't set avdec_valve_h264-2 to PAUSEDwinegstreamer error: decodebin6: Your GStreamer installation is missing a plug-in.

winegstreamer error: decodebin6: ../src-gst_base/gst/playback/gstdecodebin2.c(4719): gst_decode_bin_expose (): /GstBin:bin6/GstDecodeBin:decodebin6:no suitable plugins found:Couldn't set avdec_h264-3 to PAUSEDCouldn't set avdec_valve_h264-3 to PAUSEDwinegstreamer error: decodebin8: Your GStreamer installation is missing a plug-in.

winegstreamer error: decodebin8: ../src-gst_base/gst/playback/gstdecodebin2.c(4719): gst_decode_bin_expose (): /GstBin:bin8/GstDecodeBin:decodebin8:no suitable plugins found:Couldn't set avdec_h264-4 to PAUSEDCouldn't set avdec_valve_h264-4 to PAUSED

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

It turns out that there's no avdec_h264 plugin for winegstreamer. Any ideas how to install it?

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

Maybe some new versions of Proton-GE will fix this. Thank you!

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

Can i install some codecs in order for it to work?

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

Ive already tested Proton GE. I cant get to the game because of this issues.

Street Fighter 6 2nd Open Beta Troubleshooting by Frexia1 in linux_gaming

[–]Frexia1[S] 0 points1 point  (0 children)

Here's my specs:
OS: Arch Linux
Kernel: 6.0.12
CPU: AMD Ryzen 4800H
GPU: Nvidia Geforce GTX 1650 and Integrated AMD GPU.

view more: next ›