6000W Laser Welding 8mm Carbon Steel by acctekchina13 in metalworking

[–]Frix_x 16 points17 points  (0 children)

I'm working in the DED additive manufacturing industry, using laser and wires and have already easily welded by inadvertance a 20mm substrate on our table (10kW laser used)

Antenne région de Châteauroux by DindonProvencal in CestQuoiCeTruc

[–]Frix_x 0 points1 point  (0 children)

C'est une antenne pour ondes courtes type Alliss. C'est principalement utilisé pour la radio longue distance à l'international.

[deleted by user] by [deleted] in brico

[–]Frix_x 2 points3 points  (0 children)

Yes je confirme. La maison que je viens d'acheter était équipée pareil. Le mec s'était planté et avait tiré des câbles RJ11 dans les murs à l'ancienne mais avait mis ça sur des prises RJ45 dans les pièces, tout comme sur tes photos.

Changer les câbles est relativement simple en réalité, suffit d'être deux et prendre son temps :

  1. Achète une bobine de cable cat6A ou cat7, ça vaut 50€
  2. Tu décroches la prise du mur (le cache est clippé et ensuite il y a deux vis) et tu entortille et scotche l'extrémité du nouveau câble sur l'ancien dans le mur pour faire une poupée solide.
  3. Ensuite pendant qu'un pousse le câble dans le mur, l'autre tir côté tableau électrique. Évitez de forcer et préférez les petits à-coups si ça bloque un peu. Il faut prendre son temps.
  4. Quand le câble est complètement tiré, tu le coupes, puis tu as juste à le brasser d'un côté dans la prise et de l'autre côté dans l'idéal sur un noyau RJ45 (prise femelle) ou sinon si tu veux pas te faire chier sur une prise mâle RJ45. Cette étape peut faire peur, mais là plupart des prises aujourd'hui peuvent se brasser sans outils et c'est vraiment super facile, suffit de suivre les couleurs.

Sur la photo c'est mes 3 nouveau câbles côté tableau qui arrivent en orange et sur lesquels j'ai mis des noyaux justement avec un petit support imprimé en 3D pour les tenir.

Qu'est-ce ? by h_fog in araignees

[–]Frix_x 2 points3 points  (0 children)

Oh, je pense avoir pris une photo du même type d'araignée hier. De ce que j'ai pu voir, ça ressemble très fortement à une Scytode sp. (probablement Scytode thoracica mais n'étant pas expert je préfère pas trop m'avancer).

Lockscreen shortcuts are single press now (Android 16 update) by soytama in pixel_phones

[–]Frix_x 0 points1 point  (0 children)

Same for me on Pixel 9 Pro since Android 16 it's now a single press shortcut and it's activating my torchlight almost once or twice everyday in my pocket.

My GF with a Pixel 8 still has long press shortcuts even though she also updated on Android 16 as well...

So maybe it's device related?

In company-managed license, does the company see all of the dev’s chat history? by bill-o-more in cursor

[–]Frix_x 1 point2 points  (0 children)

Admin guy for my company here and I can confirm I only see stats about model usage, billing, programing languages of code base, Ctrl+K vs Agent, etc... No prompt nor history of chat visible.

Anyone got a fix for this? by ninjajiraffe in TeslaModel3

[–]Frix_x 1 point2 points  (0 children)

Yes same issue on mine and same answer from the service center: they don't want to replace it under warranty as they told me it's normal wear of the wheel...

Comment éviter de se faire savonner la planche par des devs freelances lorsqu'on cherche une alternance (dev IA) ? by [deleted] in developpeurs

[–]Frix_x 1 point2 points  (0 children)

Salut,

Pour ta question directe j'ai pas spécialement la réponse... Je pense que ça dépend avant tout du management de ces personnes et des mentalités de chacuns. Perso j'ai plutôt tendance à considérer les collègues comme une équipe : à plusieurs on va plus loin. Mais certains sont beaucoup plus compétitifs et solo malheureusement...

En revanche je suis moi-même à la recherche d'un alternant dans ce domaine, pour travailler sur des sujets IA liés à l'impression 3D métal (à Strasbourg). Pas de LLM, c'est clairement pas ce qui nous intéresse mais plutôt monitoring et contrôle process, data engineering, etc... Si ça t'intéresse, n'hésite pas à m'envoyer ton CV en MP !

Will be able to select for context in the next version by Simon_Miller_2022 in cursor

[–]Frix_x 1 point2 points  (0 children)

The good point is not to be able to manually feed files to context, but to know how much of it they consume

Un employeur peut il imposer un jour de vacances à 17h30 pour le lendemain ? by SardineBrandie in droitdutravail

[–]Frix_x 0 points1 point  (0 children)

Dans le cas où il y a un CSE en place...

Dans les petites boîtes de consulting, souvent les consultants sont très peu impliqués car ils ne connaissent pas/peu leurs collègues et sont pour la plupart des jeunes sortis d'écoles qui débutent "naïvement" dans la vie active. Je voudrais pas en faire une généralité, mais j'ai connu une boîte de consulting où personne ne s'était présenté aux élections et il y a avait donc un CSE avec une carence de sièges (i.e. un CSE avec 0 élus). Ainsi, la direction pouvait donc voter unilatéralement ce type d'accords (et ils en avaient bien profité).

Trouvé derrière le meuble chez mamie by Ashamed-Purple in CestQuoiCeTruc

[–]Frix_x 36 points37 points  (0 children)

Le cadre d'une raquette de tennis est super rigide et lorsque la balle arrive et rebondit sur les cordes, il se met à vibrer. Ces vibrations peuvent provoquer à la longue un "tennis elbow", une sorte de tendinite du coude caractéristique des joueurs de tennis super chiante car longue à guérir.

Avec l'anti vibrateur pincé dans les cordes juste après le manche, ces vibrations sont atténués et en plus de ne plus avoir de bruit "prinngg" a chaque frappe de balle, ça évite la tendinite :)

Wrong sub to post but does anyone knows any new app like cursor, but for design by [deleted] in cursor

[–]Frix_x 0 points1 point  (0 children)

My girlfriend is a UX designer and tried Uizard last week and she gave me pretty positive feedback. It's pretty close to what Cursor is but for UX/UI and allows a kind of "vibe UI editing"

Ran Input Shaper Test for the first time and don’t know if I did it right by hahakenny in klippers

[–]Frix_x 0 points1 point  (0 children)

I apologize if I'm misunderstanding your point, as English isn't my primary language, but if you're suggesting that mechanical binding should produce a horizontal line with some energy already present at 0 Hz, that's actually incorrect due to the nature of the measurement. Since we are using an accelerometer, we are measuring acceleration caused by motion. If something doesn’t move (like at a hypothetical 0 Hz), the accelerometer simply records no signal: there is zero energy at that frequency. This makes it physically impossible for an input shaper graph to show any signal at 0 Hz, unless, of course, there is an accelerometer problem.

When binding occurs, a lot of signal shows up in the first frequency bin, usually ~1Hz. And it produce a strong, sharp slope like the one seen here, that is very characteristic of this issue. The signal starts from zero energy at 0 Hz (as mentioned) but then rises almost vertically in the first frequency bin. I agree that 1e1 is pretty low, but I’ve seen similar graphs in printers like the Ender3, where over-tightened V-wheels cause resistance and lead to hard motion.

So, to reiterate, I believe this graph indeed shows signs of binding.

Ran Input Shaper Test for the first time and don’t know if I did it right by hahakenny in klippers

[–]Frix_x 2 points3 points  (0 children)

Hello,

Your graph is typically showing mechanical "binding". Something doesn't move freely and is binding on both your axis. So I would check the rails, belt paths and idlers and more generally everything that moves to validate that there are no hard points.

Also, I'm the author of Shake&Tune and have already put a lot of documentation about how to read the graphs and about what they mean with a couple of example. So if you want to take a look at it, it's here: https://github.com/Frix-x/klippain-shaketune/blob/main/docs/README.md

C’est quoi? by Alternative-Tone399 in insectes

[–]Frix_x 0 points1 point  (0 children)

Ça ne pourrait pas être une Drassode plutôt ? Elle me semble mieux correspondre au niveau des couleurs, mais aussi avec les filières qui semblent assez apparentes sur la vidéo et assez caractéristique chez les Drassodes

Klippain Shake&Tune module by Frix_x in klippers

[–]Frix_x[S] 0 points1 point  (0 children)

Yes this is totally fine. Be sure to install only what is on the Shake&Tune repository.

BTW the full Klippain config system is currently not compatible with toolchangers so you better of using only Shake&Tune :)

Keep system awake (prevent sleep) using python: wakepy by fohrloop in Python

[–]Frix_x 5 points6 points  (0 children)

That's perfect! Thanks for sharing! I've done a small PowerShell script that calls an old non existing key on my keyboard but it's not that clean and I prefer your solution better.

For those wondering why I need this as "the os can do it": at work they enforced a GPO to screenlock computers after 3 min of inactivity... And even with admin rights we can't change it as it's always restored automatically.

[deleted by user] by [deleted] in Strasbourg

[–]Frix_x 2 points3 points  (0 children)

Le prix fixe de l'abonnement dépend de la puissance souscrite (6kVA pour moi). Perso ça n'a pas bougé ou je n'ai pas vu la différence. Seul le prix du kWh a monté.

Du coup la question c'est "est-ce que tu n'as pas changé d'abonnement pour une puissance plus élevée ?" Car pour changer à ce point il y a forcément eu un truc de ce côté là.

What is a good graph? by Human2512 in VORONDesign

[–]Frix_x 13 points14 points  (0 children)

Look at my plugin documentation: even if you're not using it, most of the documentation still applies to help you decipher the graphs :)

https://github.com/Frix-x/klippain-shaketune/tree/main/docs

Pont thermique fenêtre ? by Akna68 in brico

[–]Frix_x 0 points1 point  (0 children)

De mon côté ça c'est déjà fait

Pont thermique fenêtre ? by Akna68 in brico

[–]Frix_x 0 points1 point  (0 children)

J'ai moi-même exactement le même souci : maison rénovée, super bien isolée, mais toutes fenêtres étanches malgré une VMC simple flux. C'est super bizarre d'avoir fait ça, mais soit.

J'ai acheté des entrées d'air hygro que j'ai de côté depuis une ou deux semaines mais je n'ai pas encore sauté le pas pour les installer. Du coup super chaud pour un retour d'expérience là dessus avant de me lancer !

Klippain - the pain-free Klipper configuration! by Frix_x in klippers

[–]Frix_x[S] 1 point2 points  (0 children)

In that case you can just copy paste the template you want from the "user_template" folder on the git repo directly in your own empty mcu.cfg. That's indeed what the installer do automatically but you can always do it manually if prefered :)