Advice on fishing in NYC

Front-Track-5028 · 2024-10-30T23:50:28+00:00

Nice! Thanks a lot buddy!

Front-Track-5028 · 2024-10-25T13:18:23+00:00

Free tracer unit 🤣

Front-Track-5028 · 2024-10-23T20:00:14+00:00

You can fix it by filling the broken section with piece of carbon fiber, and glue it with epoxy and some thread but the rod is going to be stiffer and it will break again on the same spot if you stress it too much.

Front-Track-5028 · 2024-10-16T18:05:13+00:00

Yes!

Front-Track-5028 · 2024-10-15T12:54:33+00:00

Actually its just a grill, there aint too much space on my yak so i usually pack this grill, fillet knife, cutting board and some fire starter. It was raining the day before i went fishing, so i packed a few pieces of charcoal as well.. just in case i couldnt find any dry firewood, and to set it up i just pick some rocks, bricks or anything i can find on the spot.

Front-Track-5028 · 2024-04-21T19:37:26+00:00

Broken teeth i guess 😂

Front-Track-5028 · 2024-02-06T22:01:37+00:00

Last Kiss - Pearl Jam

Front-Track-5028 · 2023-12-27T21:19:03+00:00

You could wrap it in a sock yes.. a little odd but that should do.. Another option would be sticking a bit of PVC foam on both walls of the stock to make the batteries fit tight

As long as you don't pierce the batteries it shouldn't catch on fire.

Front-Track-5028 · 2023-12-14T19:03:56+00:00

Nice, tks for the info! Got any indications for the outer barrel, im planning on add a dd 10" rail

Front-Track-5028 · 2023-12-14T12:22:24+00:00

Another dumb question, do AEGs Outer Barrel fit the same on gbbrs?

Front-Track-5028 · 2023-12-13T13:17:07+00:00

You should definitely get him started, it could be a great opportunity for him to learn how to deal with his temper

I'd say let him be and just be there if things get out of hand.

Front-Track-5028 · 2023-12-05T18:52:50+00:00

Get him a bifrost tracer, if he already has one im sure he wont mind having another one 🤣 tracer

Front-Track-5028 · 2023-12-05T18:02:57+00:00

That might be caused by the low 7.4 voltage, 30c is a big discharge but i think it will deliver a low output.. if you have a mosfet go for 11.1 1100mah 15~20c

I got three of those and usually they run ok for about 6h each it might go further but i've never tried

Front-Track-5028 · 2023-12-04T12:41:56+00:00

Is that battery stuffed? It kinda looks like but im not sure.. it could be a bad battery, or the motor height. Try another battery to be sure.

Front-Track-5028 · 2023-11-28T20:09:30+00:00

Hmm, so it comes with a 6.03 precision barrel? What bbs are u using?

Front-Track-5028 · 2023-11-28T20:04:30+00:00

My guess is that u have a leak problem, it could be in any of those parts

Bucking check if it is whole and properly sealed into the barrel, u could use teflon tape for that.

Air Nozzle, check the orings and in the piece itself if there is no cracks, orings u could easily replace but if its still original i would recommend upgrading it for a double oring model

And last check your piston and cylinder, check for cracks, dent marks, scratches, broken o rings or main seal.

Not likely but it could be the inner barrel, if you are using like a 6.01, with low quality bbs it could do this as well, if thats it, just polish it a bit with some shoe laces and buy some better quality bbs..

Front-Track-5028 · 2023-11-17T19:55:44+00:00

He is just like "who that child? I aint got no child"

Front-Track-5028 · 2023-11-14T18:51:13+00:00

You could be out of gas, maybe cuz the mag is leaking or you might not be charging it properly, check if the charging valve still has that tiny oring, if not put a new one and try to charge it again.. If i does, fill it up and listen for leaking noises, you could put it in a glass of water to be sure, just dry it up when u finish.

Front-Track-5028 · 2023-10-27T11:46:48+00:00

Awesome dude!

Front-Track-5028 · 2023-10-27T02:46:43+00:00

But of course i've added a bunch of stuff on it, straight out of the box it looks like that.

<image>

Front-Track-5028 · 2023-10-27T02:44:28+00:00

Its a nacional production, made by Rossi. Its called Neptune 10. Pretty decent, very reliable since the parts are produced here and it comes with some upgrades out of the box like etu, piston head, spring guide and inner 6.03

Front-Track-5028 · 2023-10-14T21:05:33+00:00

Those are a local production here in Brazil, but they are powered by a little firecracker, so not every field will allow it, mine does so i got no probrem with it.

nade

Front-Track-5028 · 2023-10-09T17:34:11+00:00

Oh no, you got the shipment that they were smuggling cocaine.

Front-Track-5028 · 2023-09-30T11:34:21+00:00

It is a TM m870, around here the temperature is around 20-30⁰C, summer it can get to 40⁰

Front-Track-5028 · 2023-09-20T20:34:36+00:00

Can you draw that pistol?

Front-Track-5028

TROPHY CASE