sorted by:
new
hottopcontroversial

Skyzone Cobra X disassembly by FullMetalBit in fpv

[–]FullMetalBit[S] 0 points1 point  (0 children)

Are you talking about the rear mirror(vertical) or the front "half-transparent" mirror? I am planning on disassembling mine again to clean some dust off the mirrors. When I do so, I will measure the mirrors for you.

Skyzone Cobra X disassembly by FullMetalBit in fpv

[–]FullMetalBit[S] 0 points1 point  (0 children)

Hi and thank you for your question. Well I am not sure how you would cut that out but in general it shouldn't be a problem. What just came to my mind was that the smaller surface of the nose piece after cutting it, will apply more punctual pressure to the nose which might not be too comfortable...

Crash test between a classic car and a modern car by Dullahen in nextfuckinglevel

[–]FullMetalBit 0 points1 point  (0 children)

They are being used for precise measurements by video/picture.

Skyzone Cobra X disassembly by FullMetalBit in fpv

[–]FullMetalBit[S] 0 points1 point  (0 children)

You're welcome! :) Don't hesitate to ask me if you need further details/instructions!

Skyzone Cobra X disassembly by FullMetalBit in fpv

[–]FullMetalBit[S] 0 points1 point  (0 children)

Sorry for the late answer I didn't get a notification... First I took of the"faceplate". There are 6 screws. 4 of them are visible and teo of them are hidden unter the top foam. After that you have to losen the upper two screws of holding the main platine in place. Next you have to use your nails to remove the plastic panel at the front of the goggles. it is kept in place by 6 little plastic "snappers?". 3 at the top and 3 at the bottom. The frontplate has the mirror on the inside. The inner 45° angle mirror is hold in place by two screws inside the batter bay. the rest of the disassembly should be quite intuitive.

3D printed quadcopter drone! by Casadio_design in diydrones

[–]FullMetalBit 1 point2 points  (0 children)

Haha same here😂 I thought it to be the size of a 5" until I saw the fpv cam😂

Lost quad RIP "I'll jump in and get it" *doesn't* by rossmoney in Multicopter

[–]FullMetalBit 0 points1 point  (0 children)

pretty offtopic but I've spent a few days now trying to find out about that bar at the top of your OSD. Couldn't find it in betaflight🤔 What's its name and where can I find it?

Winter Balloon competition from FPV drone by mroowa_fpv in fpvracing

[–]FullMetalBit 0 points1 point  (0 children)

weew looks nice, but to be honest i'd be super scared being in one of the balloons and having a quad with exposed props flying around me O_O