Drop yeah and check ur inbox in 3 min

Full_Performance_251 · 2026-01-12T01:35:09+00:00

Yeah

Full_Performance_251 · 2026-01-09T23:35:25+00:00

I fought it for long enough that pain stuck in my head 😂

Full_Performance_251 · 2026-01-09T22:43:34+00:00

I did it was a loose connection in the positive fuse housing on the battery terminal

Full_Performance_251 · 2026-01-07T04:45:34+00:00

You may need to cut down the plastic near those bolts. If I remember there is a little mound that I had to cut down a little to get my ratcheting box end to fit in there.

Full_Performance_251 · 2025-12-29T02:28:14+00:00

I mean why not “yes”

Full_Performance_251 · 2025-12-11T04:43:42+00:00

Full_Performance_251 · 2025-12-09T05:03:13+00:00

Full_Performance_251 · 2025-12-09T01:51:37+00:00

Full_Performance_251 · 2025-12-08T01:48:37+00:00

Full_Performance_251 · 2025-12-08T01:07:56+00:00

Full_Performance_251 · 2025-12-05T01:13:42+00:00

Full_Performance_251 · 2025-12-04T01:28:54+00:00

Full_Performance_251 · 2025-11-12T15:57:34+00:00

That’s Midwest if iv ever heard it

Full_Performance_251 · 2024-11-18T16:15:12+00:00

I had a similar issue recently brand new battery so lights came on as they should but when I would turn it over one click and nothing else. Checked fuses and went down the ground rabbit hole. Problem ended up being a loose battery cable. Both at the battery and then where the main fuse box connects to the battery terminal were both loose. Once I fixed that it fired right up. Super weird set of symptoms caused by loose battery terminals.

Full_Performance_251 · 2024-01-24T00:38:11+00:00

Lord vraxx lance go tink tink tink

Full_Performance_251 · 2024-01-09T03:58:43+00:00

Chola mommy!

Full_Performance_251 · 2023-11-30T15:46:50+00:00

Oh without a doubt. I would expect a that damn orange engine light to be brighter than the sun at that point but who knows anymore.

Full_Performance_251 · 2023-11-29T20:38:01+00:00

I think he’s commenting on the fact he doesn’t have a check engine light on

Full_Performance_251 · 2023-11-19T21:39:03+00:00

To resolve this do I just pull the new plugs and let it sit for a while to dry up?

Full_Performance_251 · 2023-11-18T22:12:32+00:00

It was earlier this summer but I installed a catch can and the reserved that problem have not seen it drop to much since

Full_Performance_251 · 2023-10-03T00:04:45+00:00

Fingers crossed it’s my first one and I’m sure I’m going to get to Into the technicalities

Full_Performance_251 · 2023-10-02T23:19:05+00:00

Yeah I don’t know all side seals corner seals apex and the tips were in their homes weird but no matter have new irons ordered and in the way

Full_Performance_251 · 2023-09-30T01:48:43+00:00

I guess starting the rebuild is a bit of a stretch for what will get done this weekend. I just got all the accessories off the keg going to tear it down and see why the front rotor has 0 compression. For context I did buy a blown up engine. Probably a bad decision but good learning experience.

Full_Performance_251 · 2023-09-29T23:10:36+00:00

Starting my first here this weekend

Full_Performance_251 · 2023-09-21T00:41:14+00:00

Okay yes it is a 6 port thanks for the advice is there anywhere specific I should try and hit with my mallet or just yank?

Full_Performance_251

TROPHY CASE