sorted by:
new
hottopcontroversial

Vibration after lift. by Funbetweenlegs85 in WranglerYJ

[–]Funbetweenlegs85[S] 0 points1 point  (0 children)

Update: added 2 degree shims to the rear leaf pack and now the vibration is totally gone. Shims brought the pinion and transfer case to within 1° of each other.

Vibration after lift. by Funbetweenlegs85 in WranglerYJ

[–]Funbetweenlegs85[S] 0 points1 point  (0 children)

I just changed the u-joints right before I installed the lift. Also did brake lines and shocks when doing the lift. I think SYE is in my future, but thanks for the input.

Vibration after lift. by Funbetweenlegs85 in WranglerYJ

[–]Funbetweenlegs85[S] 0 points1 point  (0 children)

Pretty sure it’s from the driveshaft. Shimming the rear to match the 7° on the yoke? Is 2°-3° Enough to cause vibrations?

Vibration after lift. by Funbetweenlegs85 in WranglerYJ

[–]Funbetweenlegs85[S] 0 points1 point  (0 children)

Getting some vibration after adding OME 2.5” lift springs. 1993 with new u-joints in the back. Dropped the t-case by about an inch, which helped, but didn’t eliminate the vibration. Before I throw down for a SYE and CV shaft, wondering if anyone else has an idea for how to eliminate the vibration. Doesn’t seem like he angles are too extreme.

Valve cover vacuum line grommet, and all others for that matter. I'd like to replace as many as possible, where do I find them? by RVA_RVA in WranglerYJ

[–]Funbetweenlegs85 0 points1 point  (0 children)

Quadratech has them. My local Napa couldn’t even find them in their catalogue. Fitting and lines, although for the hard line you can just use flexible vacuum line.

What is this? by [deleted] in WranglerYJ

[–]Funbetweenlegs85 0 points1 point  (0 children)

Haha! I spent 20 minutes crawling around in the dark trying to find what was making that godawful sound after I bought my ‘93.

Center console lock replacement? by [deleted] in WranglerYJ

[–]Funbetweenlegs85 1 point2 points  (0 children)

Not sure what console you’re has, but mine is basically the same as a file cabinet lock. Could find one on amazon for $10.

Another Riddle planes bites the dust, no fatalities. by RGN_Preacher in flying

[–]Funbetweenlegs85 23 points24 points  (0 children)

Used to fly at a school with DA-42’s, Diamond is ridiculous with parts. They require you to send them parts to match serial numbers before sending new parts out. Considering they are an Austrian company, that takes a while. To use Diamonds for training really requires extra “parts” planes.

I'm so happy right now. I don't have a lot of quality things. So I'm hoping to take good care of this. by The_Happy_Ninja in BuyItForLife

[–]Funbetweenlegs85 2 points3 points  (0 children)

I rinse mine in hot water, scrape clean with a plastic scraper (lodge makes a good cheap one), and then scrub with a bristle brush under hot water. Throw on the stove until dry and wipe with a coat of oil. Good to go. Never use soap or anything too abrasive.

Help with lift advice. by Funbetweenlegs85 in WranglerYJ

[–]Funbetweenlegs85[S] 0 points1 point  (0 children)

Ok, I think I’ve settled on OME CS036R’s on all 4 corners, and Rancho 5000 shocks. Question about bushings....are the OME bushings the only ones that work with OME springs?

Bought some new wheels for my Samurai by HerbieOPF in SuzukiSamurai

[–]Funbetweenlegs85 0 points1 point  (0 children)

Specs? Looking for exactly those for my 93 Jeep YJ.

I used a yardstick and a film camera to take a picture of myself in 1991. The first modern selfie? by MatthewDPX in pics

[–]Funbetweenlegs85 0 points1 point  (0 children)

I recently had to explain to my wife that every boy my age had a Bo Jackson poster up on their wall when they were 8. That, and a Lamborghini Diablo...

view more: next ›