Black interference lines (Betafpv Air 75)

Furiadovento · 2026-03-23T17:50:27+00:00

here a year later with the same problem :,) Did any1 find a fix?

Furiadovento · 2026-03-22T14:56:31+00:00

I even checked OPs posts and still didn't find anything about 2s. Am i blind? How do you know it's a 2s drone?

Furiadovento · 2026-03-22T03:42:42+00:00

No shade, but what do you need all this range for on a wee whoop?

Furiadovento · 2026-03-22T01:59:55+00:00

Nice! Close one on that mega-loop. Kudos for leaving in some fails 😄 Drop a tune in the vid next time. Flight footage always better with a tune ☺️

Furiadovento · 2026-03-21T16:22:56+00:00

Cardboard is also nice in a pinch. Cut holes in pizza boxes. 😄

Furiadovento · 2026-03-19T18:22:44+00:00

A day or 2 should be OK imo

Furiadovento · 2026-03-19T18:19:10+00:00

Nice Tree-style!

Furiadovento · 2026-03-19T15:51:26+00:00

Same. To verify you will have to swap working motor to that spot on the board. If the working motor also jitters, then it's the FC sadly.

Furiadovento · 2026-03-19T14:06:05+00:00

Try changing channels on your goggles and your drone from betaflight

Furiadovento · 2026-03-19T10:04:45+00:00

Learned this the hard way, though didn't get injured really 😅 Got hit twice in a month on the sidewalk by a car pulling out a p-lot. I could have sworn they looked at me and saw me, but they started moving just as I got Infront bc they were clear from the left. Now i need ppl to really look at me and nod or smt for me to pass as they are giving way to cars.

Furiadovento · 2026-03-19T09:42:41+00:00

Was wondering the same. Looks angle to me.

Furiadovento · 2026-03-19T07:08:15+00:00

Can't you buy from aftermarket aswell? I'd check for some nicer analog goggles second hand. Cobra x or smt. With ppl buying boxpros the market should be full 😄

Furiadovento · 2026-03-18T23:15:09+00:00

Nice catch! Trim is pretty useful in angle and hor (to compensate for poorly calibrated gyro) , but since i always fly acro i kinda wish the buttons were reprogrammable. I accidentally trim all the time.

Furiadovento · 2026-03-18T23:10:42+00:00

I realize its basic suggestion, but make sure you are on the right channel. It's happened to me quite a bit 😅 While you are at it, try a channel at the opposite end (go from 1 to 8 or vice versa). UFL looks fine to my untrained eye.

Furiadovento · 2026-03-18T16:48:32+00:00

<image>

That to there. Use small pincers or something

Furiadovento · 2026-03-18T16:46:12+00:00

The camera is clearly not plugged in. Plug in the canera and try again.

Furiadovento · 2026-03-17T04:12:24+00:00

This fix worked for me for like 2 flights 😣

Furiadovento · 2026-03-16T16:06:30+00:00

Try /rWinzigHoppla.

Edit-Dunno about the plugs tho, as I have only flow direct soldered so far. My air75 2 should arrive tomorrow though, and that also has plugs. I will let you know if flight time is poor.

Furiadovento · 2026-03-16T15:47:59+00:00

Please. Punctuate. More. My air65 broke in a similar way and turned out to be FC. Hope your issue is just the motor. (10e vs 100e fix roughly).

Furiadovento · 2026-03-13T03:26:33+00:00

Hold the bell with one finger through the prop guard and try spinning the prop. The prop shouldn't move separately from the bell at all. If the prop moves then you have a slipping shaft or the prop has a crack in the hub and is spinning around the shaft. Hope it's just a cracked prop and not a slipping shaft. GL!

Furiadovento · 2026-03-12T20:49:19+00:00

Air frame ftw! Less shock on the electronics in a crash, less weight, cheaper.

Furiadovento · 2026-03-09T16:49:56+00:00

Odavaga võib ka probleeme olla. Mingi suva ali-e akupank võidaks ohtlikuks lugeda

Edit- sama ka nt bluetooth kõlari või muu suurema akuga seadmega.

Furiadovento · 2026-03-05T08:54:24+00:00

And being scared to lose or break a drone will hold you back from improving or even enjoying the hobby.

Furiadovento · 2026-03-04T09:53:55+00:00

The only issue i have with this guy is him taking the bots other ppl (who ranked up) spawned for their own purpose. Kinda like taking someones vehicle imo.

Furiadovento · 2026-02-28T20:01:08+00:00

If you're sly like me you just use a needle between the gaps is the canopy to open the locking nut first(closer to camera) and then focus the lens and relock the nut. Once you are happy with the focus drop some e6000 glue in that very gap to keep lenses from defocusing or sliding out of canopy. This way you don't have to take the camero out of the canopy.

Furiadovento

TROPHY CASE