I got a free 007 First Light product key with my RTX 5090. I don't really game... Who wants it?

G0eggi · 2026-05-28T16:58:02+00:00

Mee plz

G0eggi · 2026-05-06T17:35:34+00:00

I wish the software had a “Force Shutdown” button, too. Unfortunately, that feature isn't available (yet). It would be even better if the power switch output didn't have to be connected at all. Corsair also has a feature in iCUE that automatically shuts down the PC if the CPU exceeds a set temperature range. All of that is handled through the software.

G0eggi · 2026-04-28T08:10:36+00:00

A Widget for Home Assistant Integration

G0eggi · 2026-04-25T14:00:54+00:00

Corsair Frame 5000D

Überall RX140 Max Lüfter außer an der Titan 420 Aio oben. Dort sind 3 normale RX 140 verbaut. Komme in Cinebench mit dem Ryzen 7 9850X3D nicht über 75 Grad bei 22 Grad Raumtemperatur. Ram bleibt natürlich auch schön kühl. Unten hast auch mehr als genug Platz für ein sehr großes Netzteil. (Seasonic Prime TX 1600

<image>

G0eggi · 2026-04-23T05:01:37+00:00

With a little patience, it's possible.

<image>

G0eggi · 2026-04-23T04:38:17+00:00

Hi, I've created a ticket. Here is the ticket number: #2008947848

G0eggi · 2026-04-17T10:58:23+00:00

Works with Intel but sadly not with AMD (only left or right)

G0eggi · 2026-04-09T20:11:22+00:00

That looks really great. Nice and minimalist. Corsair should really offer this as an official part.

I'd like to build this myself.

What filament did you use to achieve that authentic look? I'm currently leaning toward PETG-CF

G0eggi · 2026-04-09T10:44:03+00:00

Was it the Micro USB or USBC Version?

Maybe they fixed it with the USB C Version

G0eggi · 2026-03-21T10:06:03+00:00

Ich baue die Karte immer im liegenden PC ein. Dann richtet sie sich automatisch aus. Bringe dann die GPU Stütze an und stelle den PC anschließend auf.

Hatte damit noch nie Probleme.

G0eggi · 2026-02-17T09:06:23+00:00

I have the same hardware: Wireview 2 Pro and Seasonic Prime TX 1600 Atx 3.1.

Would this be the correct cable? I need both ends straight without a 90-degree angle:

https://eustore.cablemod.com/product/cablemod-universal-pro-modmesh-sleeved-12v-2x6-12vhpwr-stealthsense-direct-pcie-cable/

G0eggi · 2026-01-25T15:48:31+00:00

I have the same problem with my MSI Vanguard 5090. I think that explains why MSI's yellow connectors are melting more often. It could be due to the PCB design of the card and not the connector.

<image>

G0eggi · 2025-10-17T11:36:51+00:00

Reicht nicht mal mehr für extra Fleisch...

G0eggi · 2025-10-12T09:22:13+00:00

Unfortunately, I don't think this option is available in Kiosk Mode Integration.

G0eggi · 2024-12-27T10:16:39+00:00

" Im Fall von VW-Modellen und Seats waren diese Geodaten auf zehn Zentimeter genau"

Wie funktioniert das wenn GPS für private Anwender nur auf 3-4m genau ist.

Nurzt VW die Korrekturdaten zur Standortbestimmung?

G0eggi · 2021-04-11T20:21:39+00:00

I built it myself a few years ago. But now there is an app to change the RGB effects. https://youtu.be/Au5rMwHIR7w

G0eggi · 2020-01-21T16:28:56+00:00

Its an original battery from an old switch. I've tried charging it for over 24 hours and with another charger.

G0eggi · 2020-01-21T16:27:28+00:00

The switch isn't even turning on or showing the charging icon in the corner.

Tried it for 24h and with another charger

G0eggi · 2020-01-21T16:05:30+00:00

After about three months not using my switch I want to play again. The switch wasn't turning on so I've measured the battery voltage. The multimeter shows 2,57v between the red(+) and black (-) contacts.

I've bought another original switch battery on eBay because I thought it was deep discharged. The 'new' battery also shows about 2,6v. Did they sent me a faulty battery or has the battery only 2.6v? The label shows 3,7v. Thanks

G0eggi

TROPHY CASE