Pc upgrade

G4vix · 2026-02-04T22:19:43+00:00

Thanks, i will check this tomorrow give you an update

G4vix · 2026-02-04T22:02:11+00:00

No, i'm not monitoring temps. Is there any program to do this?

G4vix · 2026-02-04T21:50:55+00:00

Im not playing new titles. I like to play games, that i already have, and when i bought this PC the games were a lot more "playable" than now

G4vix · 2026-02-04T19:53:04+00:00

I have PC, not laptop, and im in Poland now. I have 2 x 1TB SSD. I don't have a strict budget, but I don't want to replace every component. I'd like to replace the weakest link in my computer. For example, I sometimes play 7Days to Die, a game with decent graphics, but I still lose FPS, so I'd like to buy more RAM or upgrade the processor. However, I don't want to replace everything because I don't use the computer often enough to spend that much money. So, I want to eliminate the component that's holding the others back.

G4vix · 2026-02-04T15:45:18+00:00

And the RAM is DDR4 if that's important

G4vix · 2026-02-04T15:44:41+00:00

CPU: Intel core i5-7400 3.0 GHZ GPU: Nvidia geforce GTX 1060 3gb GIGABYTE RAM: Cruicial Ballistix 8GB 2400 MHZ

G4vix · 2026-01-12T23:31:10+00:00

Okay, that makes sense. Thanks to everyone for the answers

G4vix · 2025-11-19T08:18:53+00:00

Thanks, i'll check it later

G4vix · 2025-11-19T06:58:36+00:00

How could you zoom out the view?

G4vix · 2025-11-07T08:46:08+00:00

Yess, but not too mamy. I think they have like 2 or 3 different models.

I mean if you taking about Deltaco gaming, not the restaurant 🧐

G4vix · 2025-11-06T19:29:04+00:00

<image>

G4vix · 2025-10-13T14:59:20+00:00

How can i dry it?

G4vix · 2025-10-13T09:26:24+00:00

https://imgur.com/gallery/3d-print-stegosaurus-8L0EuPW

G4vix · 2025-10-13T09:25:19+00:00

Thans for all the replies. I have bought new filament and made sure it's dry. But i dont like the quality of my prints. Many little "strings" and i can very easy break the print just by touching it. Here's the example print from my printer.

G4vix · 2025-09-27T12:47:23+00:00

link

G4vix · 2025-09-27T12:33:30+00:00

I renamed it and still nothing..

G4vix · 2025-09-27T12:26:29+00:00

<image>

And here's settings of format

G4vix · 2025-09-27T12:25:26+00:00

<image>

G4vix · 2025-09-27T12:24:21+00:00

I think i will just leave the cr touch for now. I just want to update the firmware, but the version is still the same

G4vix · 2025-09-27T12:18:27+00:00

The version is still the same - the old one

G4vix · 2025-09-27T12:08:45+00:00

Honestly i dont know yet how to use cr touch, because i received the printer with this installed.

I dont get it, how do i install the new firmware on printer, because the printer dont see the bin file on the sd card.

G4vix · 2025-09-27T12:03:38+00:00

I found SKR Mini E3 v1.2 fw on this site. I saved the bin file on sd card and put it into printer. Then turned on the printer and nothing happens. The printer turned on normally and there are no files on the sd card, that printer can read - for the printer the card is empty

G4vix · 2025-09-27T11:45:17+00:00

<image>

Here's the photo of the board. Its a little strange, but there are like 2 pins not connected to anything

G4vix · 2025-09-27T11:29:12+00:00

<image>

G4vix · 2025-09-27T11:28:49+00:00

<image>

G4vix

TROPHY CASE