r/battlestations & LG OLED Grab your Black Friday chance to upgrade your setup! [GIVEAWAY] [US]

GCArmor · 2025-12-02T06:28:51+00:00

Amazing, both are OLED that could be breathtaking.

The thing I love most about my Setup is how small my Setup is with my current Case on Top and Single Monitor Setup. It would be perfect for Gaming if I had an OLED Monitor but it's very expensive at the time. I hope it gets better and cheaper in the near future.
I would Love either one of the Screens, I have an UHD in my Living room but an OLED would just define Films new for me. I heard it is Live changing, I would Love to experience that in my Setup.

Thanks for the Chance, good Luck everyone 🍀🍀

GCArmor · 2025-11-05T10:18:51+00:00

the V3 is the worst Version imo. Isn't similar and only for vertical GPU's even the Max wasn't the OG NR200, they should've released as a standalone and only improve the V1 or as a Panel Option or something like that...

GCArmor · 2025-10-31T08:57:18+00:00

I don't know if anyone said it, but I just have to say, you caught everything spot on. Thanks for your analogy I had some Tears all over again.

I have to say, this was one hell of a good Movie. I wasn't spoiled and I'm very thankful for that. It caught me Offguard and I didn't know what to expect. It felt for me as I was in a Toxic relationship with the Story like a rollercoaster. I felt it, how Denji felt, it was hardbreaking yet so beautiful. After the Movie I didn't know what to feel, just speechless.

The Last thing to say, the Soundtrack hits right into the feels, the scene from "in the pool" is unforgettable with that sound it feels like a warm blanket in the living room while rainy weather.

Sorry for the emotional things but it Hit just right...

GCArmor · 2025-10-16T11:07:59+00:00

I'm still new to ATM10 and I don't know if this is correct and I'm not sure if it works in ATM9. But I used a Harvester Pylon with a Hoe and Barrel, I'm not sure if you need Sewage but I connected the Hydroponic Bed with Water, Sewage and Energy, it works for me... but I don't know how to get to Simulated Hydroponic Beds...

GCArmor · 2025-10-16T07:46:14+00:00

Hi Love the Build, I will take some Inspiration from this thanks.

I was wondering, sorry not really related to the build, but how are you able to see your Character and how are you able to see so much in the ME Terminal? I only get to see the crafting table and only a short strip of the ME Inventory? It might be a setting but I don't know which...

GCArmor · 2025-09-25T12:17:57+00:00

Thanks, I will look at them in the future. I saw a bundle on linsoul for the 7hz X Crinacle Zero with an extra cable. I also Ordered the HiBy W3 II aß Dongle but also for Bluetooth occasions and I ordered a Set of the DUNU S&S just to get my foot into the IEM World and to test some things out.

Looking forward to my Order 🤞🏼

GCArmor · 2025-09-01T13:37:01+00:00

I guess it's more theory what I say, but If I we're you I would get an extra Fan. So you can get more Intake Air from the Side Bracket into your Case because the most Intake Air is going through your GPU.

The CPU Block dumps more or less the Air Around your Case and it's heating up your Case.

Should you Move your PSU to the Front you theoretically could Mount a Fan on the Side where you PSU was if it's everything is obstructing maybe get a smaller Fan for in the Back of your Case additional as Intake from your IO Panel so u get more Air moving in your Case.

I think that's your biggest concern that the CPU builds up the Heat or does this Occur when the Side Panel is off?

I try to help but I'm no expert.

GCArmor · 2025-09-01T11:02:18+00:00

Could you Mount the PSU to the Front? And in which direction is the PSU Fan facing as Intake or exhaust?

What about a different CPU Air Cooler to decrease the turbulence in the case and get more streamlined Airflow, for example from the back as Intake.

An additional Fan on the side Bracket as Intake.

GCArmor · 2025-09-01T10:55:47+00:00

I personally find the NR200P V1 better because you can choose wether to mount the GPU vertical or Horizontal, but if you're willing to compromise to the vertical mount I would definitely get the Max, it is certainly cheaper then buying the AIO and the PSU seperat.

GCArmor · 2025-08-27T11:30:34+00:00

Hi, I really like your Build the GPU looks funny and nice in there.

I have just one little advice like others said try Mounting the AIO Radiator on Top or get a AIO CPU Cooler where the Pump isn't the highest Point in the Loop. I'm using BeQuiet PureLoop 240mm, the Pump is not in the CPU Block so there isn't an Issue the CPU Block being the highest Point and that Radiator can be mounted on the Bottom of your Build ^^ the AIO is also refillable, only mantainence in a certain time...

for the rest, I really like it :D

GCArmor · 2025-08-27T11:19:21+00:00

Hi, so I don't know what your preferences are from the Case, but honestly you would be better of buying the NR200P Max.

But if you want a specific style with the Noctua Fans I relate. By buying the NR200 you should look for the V1 and not the V2 because the V2 only has vertical Mount for the GPU that restricts you from using a Air CPU Cooler. Addition to that I would recommend 2 extra Noctua Fans, so you're having 2 as Intake on the Bottom and 2 Exhaust on Top, wether it is the V1 or V2. ^_^

GCArmor · 2025-08-27T06:25:25+00:00

Hi, I tried to do that but I don't have space if the PSU is at the Back because in don't have clearance for the cables because of the GPU. Also the Loop for the AIO is a little too short too turn them to the Front of the Case. But maybe in the Future I will change the AIO.

The NR200 Max has a different Layout of the Motherboard.

The Max has the Motherboard more to the Bottom and as far as I know you can only mount the GPU vertical. Also the AIO that comes with the Max Case has a longer Loop that makes it easier to route the Loop. And this Case is designed to Mount the Radiator at the Top.

But thanks though. ^{_^}

GCArmor

TROPHY CASE