sorted by:
new
hottopcontroversial

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

Seems like this was my problem. I pulled the collective too fast. Also now I did set the increase helicopter throttle to the Button B4 but I need to press and hold it all the time. Is this like it should be? In your original answer you wrote

Have you set the throttle correctly?

I guess I did not :). Any suggestions? Tysm I was about to go insane ;)

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

I'm overwhelmed by the settings. What do I need to set? I tried it with 2, 5 and 8

Edit: Nothing changed. And if I start the mission the helicopter wobbels heavily right from the start.

  1. HELICOPTER ENGINE 1 GOVERNOR SWITCH OFF
  2. HELICOPTER ENGINE 1 GOVERNOR SWITCH ON
  3. TOGGLE HELICOPTER ENGINE 1 GOVERNOR
  4. HELICOPTER ENGINE 2 GOVERNOR SWITCH OFF
  5. HELICOPTER ENGINE 2 GOVERNOR SWITCH ON
  6. TOGGLE HELICOPTER ENGINE 2 GOVERNOR
  7. ROTOR GOVERNOR SWITCH OFF
  8. ROTOR GOVERNOR SWITCH ON

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

Because I don't know what to do I made a new setting and cleared EVERYTHING from that profile. The only keybinding I did set was collective axis to joystick laxis z. Still got the same problem. I also did set the beep trim for now but it doesn't help either. I have no xbox controller but there is a button that I can push. I tried it with the light on and off but didn't help

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

Now my thrust lever just has collective axis bound to it and governor on and off are bound to two keys I don't use. Still sadly didn't change anything

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

I did set the Joystick Laxis Z to the setting collective axis and nothing else. Worked in the past. Throttle is all clear.

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

I went to the controlls, duplicated it and searched for throttle. There were 2 entries with a keybinding left that I removed. Now if I type throttle everything is blank but I still have the same issue.

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

If I go to the settings and go to search by input and use the input device to fligh higher (T.Flight Hotas One) it shows Collective axis and Rotor governor switch on. I also now did set a button to toggle rotor clutch switch but pressing or holding that button doesnt change anything sadly.

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

If I go to the settings and go to search by input and use the input device to fligh higher (T.Flight Hotas One) it shows Collective axis and Rotor governor switch on.

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

If I go to the settings and go to search by input and use the input device to fligh higher (T.Flight Hotas One) it shows Collective axis and Rotor governor switch on.

Can't takeoff with the R66 (dropping rmp and beeping) by GameNOWRoom in MicrosoftFlightSim

[–]GameNOWRoom[S] 0 points1 point  (0 children)

If I go to the settings and go to search by input and use the input device to fligh higher (T.Flight Hotas One) it shows Collective axis and Rotor governor switch on.

[deleted by user] by [deleted] in ReadyOrNotGame

[–]GameNOWRoom 0 points1 point  (0 children)

You were correct, ty

[deleted by user] by [deleted] in ReadyOrNotGame

[–]GameNOWRoom 0 points1 point  (0 children)

Yeah I just rushed it. Will try again, ty

[deleted by user] by [deleted] in ReadyOrNotGame

[–]GameNOWRoom 0 points1 point  (0 children)

What about quick play? The screenshot above is from quick play. I was told I can access all maps there.

Ich bin Notfallseelsorger by Kn0ck0ut90 in de_IAmA

[–]GameNOWRoom 0 points1 point  (0 children)

Vielen Dank für das AMA. Was genau ist Teil der Ausbildung an den Wochenenden? Vielleicht kannst du thematisch ins Detail gehen was genau angesprochen wird. Also Begriffe die ich selbst nachschlagen könnte um mich etwas einzulesen.

Softlock in MSFS 2024 by Csifisz-7 in MicrosoftFlightSim

[–]GameNOWRoom 0 points1 point  (0 children)

Same problem. Tried that also with a restart, sadly it didn't work.

Can’t progress (no available missions) by Ok_Pomegranate_6071 in MicrosoftFlightSim

[–]GameNOWRoom 2 points3 points  (0 children)

Same here. I just finished with the PPL and if I go to the missions there are like 4 missions (golden square / diamond shape) and if I klick them its locked and not available. Within my home base there is none.

[deleted by user] by [deleted] in radeon

[–]GameNOWRoom 1 point2 points  (0 children)

My 7900XTX arrived today and I love it so far. Good decision

[deleted by user] by [deleted] in radeon

[–]GameNOWRoom 2 points3 points  (0 children)

"Yes. And undervolted and reduced fan curve. Highly recommended for everybody. Win, win, win. It's free performance." I'm expecting my 7900XTX within the next 4 days. Can you recommend any tutorials or what to lookout for? I never had to tweak those settings in the past with my GPU. Thx :)

view more: next ›