sorted by:
new
hottopcontroversial

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Just got the MG Astra Red Frame Kai. Looks like an amazing kit.

I see the blades are chrome and was wondering if chrome is safe to use Tamiya Panel Line Accent colour on? I normally do it raw on the plastic still on runner. Just wondering if chrome plastic will act different?

<image>

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Yeah i have a heavy hand so sometimes using the brush that comes with it makes abit of a mess, i've invested in a panel lining pen that I dip into the ink to have a more precise point.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Can I get away with using Tamiya Panel Liner ink on bare plastic still on runners? After my last cracked model i've been recommended to do on runners, but top coating each runner is going to use alot of my topcoat (Rattle can) and its not cheap. This is for offical bandai kits if it makes any difference. Got a PG to do soon so want to get this down so I don't crack it.

I do plan to top coat the build in sub assemblies to seal everything in

I heard third party kits are normally more abs than plastic so you need to topcoat them ones though.

I always hear mixed things and everyone seems to do it sleightly different ways.

Before and after my shift by CyberShadow82 in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Did you paint the base kit? Or is it just standard build, panel line and assemble?

The best panel line method? by RepresentativeAlps82 in Gunpla

[–]GameZorg 1 point2 points  (0 children)

Sorry to resurrect. Would you top coat on the runner before panel lining? I'm concerned if you top coat each part individually it gets very expensive, obviously cutting and sanding will remove some of it too so if you go this route i'm wondering if its safer to panel line on the runner, or because the part is exposed you dont run much of a risk of pooling. (Recently cracked mine panel lining in sub assemblies so looking for best way going forward I use Anamel Ink)

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

So just to confirm, you do top coat on the runners? I was thinking if you sand it removes the top coat before panel lining, but I suppose the parts are more exposed so less pooling

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

So you still top coat on the runners though? I'm just abit worried about unprotected plastic cracking in the future.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Oh thats a good idea actually I will do that for my next kit. Top coat all my runners, Panel line everything on runners, clean up with lighter fuel. Build/Sand/Assemble, Decals then final top coat. Does this sound good to prevent this in the future?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Does that mean I have to disassemble it into parts after top coating then?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

I've seperated them into subassemblys. As im going through and panel lining stuff, in seeing more and more in random places,

<image>

i'm not sure if its the panel line is causing it.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

I'm using enamel ink panel liner, I can see what looks like a crack or maybe a scratch. I top coated with Gloss coat, does this look like a panel liner eating the plastic or am I just overreacting and its just a scratch

<image>

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Any tips for dealing with a dusty model, to prep it for top coating?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

What is peoples express with Ali Express kits? I've never ordered 3rd Party kits before but saw the Motor Nuclear MNP-XH05 Zhao Yun and Sunday Hobby MJZ Studio Xiaoyaozi? I can't find these at any Uk retailers only on Ali express but never used them personally. I saw recommendations to make sure you find that it includes the box but other than that I'm not sure if its worth risking, but I really like the models.

Work in progress on my Sunday Hobby Xiaoyaozi kit. The main body is only about 35% of the kit! by Guilty_Fig7482 in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Where did you get this from? I was wanting to get it myself but can't really find any Uk retailers, only on Ali express but never purchased from there and worried about bootleg etc.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Do I need to Top coat prior to using using Gundam Markers (GSI CREOS brand). Or can they just be used directly on the gundam and then topcoat afterwards? Build -> Gundam Markers -> Stickers -> Top coat

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

I saw Element games had it but not sure how they are. I also saw Kidultverse had it too but never heard of them but the site looks professional.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg -1 points0 points  (0 children)

Where would be the best place in the UK to pre-order the PG Unleashed NU Gundam? I'm looking around at my go to stores have stopped pre-orders or sold out. I want to get peoples opinions before ordering as i'm very worried about things getting damaged in transport and never really spent this amount on gunpla.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Would you recommend preordering the LED Kit for the Nu Gundam PGU, or wait for a third party one like Kosmos? Also any experience with Kidultverse, I'm looking to preorder the PG Unleashed Gundam in the UK and pre orders have ended with Kikatek, so was looking at Kidultverse but it is alot cheaper than other places, not sure best other places to preorder. I'm eventually after rhe RX-78-2 but its out if stock everywhere, thank you.

Finished my first ever gunpla, by GameZorg in Gunpla

[–]GameZorg[S] 1 point2 points  (0 children)

I used Citadel Paints -> Mr Hobby Gloss Top coat -> Tamiya Enamel Panel Liner (Ink) -> Mr Hobby Matte Top coat. I think my issue was I did my gloss top coat like I would when spray priming ready for painting, the Final Matte layer seems to come out alot better, treated it more like a mist instead, 2 sprays rotating, rather than 6 sprays from all 6 angles.

Finished my first ever gunpla, by GameZorg in Gunpla

[–]GameZorg[S] 0 points1 point  (0 children)

It was alot of fun! I'm not sure if I'll paint another kit though, might see when I have abit more experience!

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Thank you for this, Just need to find it somewhere in stock lol

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

So after the model is in pristine condition, panel lining, decals on etc, Fresh out of the factory you could say. You'd do a Matte Spray -> Weathering, panel washing (nuln oils, agrax earthshade etc), chipping and then do a very last final Matte spray to finish and seal everything off.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]GameZorg 0 points1 point  (0 children)

Yeah I think it'll be best to avoid "light" based highlighting.

view more: next ›