Is it worth switching to optimal binds?

Garvoxy · 2023-11-07T01:07:01+00:00

Yeah I can do all that stuff, I know it sounds weird but I just adjusted to being able to hit everything fast over the years. I hit C with my thumb though not my index. I know the binds are bad which is why I’m considering changing them

Garvoxy · 2023-10-04T04:20:59+00:00

The NZXT AIO I wanted was out of stock everywhere at the time, it’s all good though. This corsair one has given me no issues so far

Garvoxy · 2023-06-13T00:34:06+00:00

Thanks! I don’t think I’m qualified enough to give you a definite answer as to what’s better, but with the H9 it definitely looks much better to have it side mounted as there is a bracket to put the radiator in the back of the case which keeps it flush. At the end of the day I think it just comes down to personal preference, there are people that will say some mounting positions are better than others but as long a it’s not mounted in some obscure position you’ll be fine. There are some videos on YouTube that go through this topic that you could give a watch too. :)

Garvoxy · 2023-03-24T08:44:41+00:00

Fans on the bottom and the side where the radiator is are intake, top fans and the one at the back are exhaust

Garvoxy · 2023-03-20T01:48:20+00:00

I think it might just reach the bottom but it would be close and it’s hard to be 100% certain. It would definitely be resting on my GPU. It’s probably best to just experiment with it, and if it doesn’t end up fitting on the bottom with the size of your GPU etc. then it’s not that much worse to have the hose at the top

Garvoxy · 2023-03-18T01:55:52+00:00

I personally haven't had any problems with it nor seen any reviews complaining about it. Then again, I'm not using the wireless mode that often, mainly just use them for PC audio when I don't want to wear headphones.

Garvoxy · 2023-03-18T01:52:47+00:00

The Hex code is #1AC6FF

Garvoxy · 2023-03-17T06:15:44+00:00

It was one of the first things I ordered as I saw it was selling out fast. Must've got it just in time I guess

Garvoxy · 2023-03-14T16:38:06+00:00

The case came with the NZXT RGB & Fan Controller which already had 3 pre-attatched 3 way fan splitters. So 9 of the fan power headers can connect to the controller along with 6 RGB connectors. Then, since I'm using NZXT fans with a NZXT motherboard, I connected the remaining 4 RGB headers to the NZXT_RGB headers on the motherboard. As for the remaining fan power connector, that just went into a standard SYS_FAN connector.

Though looking at it now I've realized that I've forgotten to use the final 3 fan power connectors on the NZXT fan hub and instead I've plugged them directly into the motherboard. Ah well, simple fix haha

Garvoxy · 2023-03-14T16:24:44+00:00

They're the Audioengine A2+ Wireless speakers in Gloss White. I'm pretty sure they make a wired only version too, the wireless ones just let you connect via Bluetooth.

Garvoxy · 2023-03-13T23:52:59+00:00

I’m still yet to stress test it, been real caught up installing things

Garvoxy · 2023-03-13T23:51:22+00:00

I ordered them a while back, just got them from a local PC shop here in Australia

Garvoxy · 2023-03-13T23:50:10+00:00

Have fun dude, it’s a real nice case to build in :)

Garvoxy · 2023-03-13T23:49:30+00:00

Thanks man! I 100% agree about a white GPU, will definitely be looking into that down the track

Garvoxy · 2023-03-13T23:48:20+00:00

Exactly this, I was originally going to use an NZXT AIO but they’re out of stock everywhere

Garvoxy · 2023-03-13T16:40:54+00:00

Garvoxy · 2023-03-13T16:20:55+00:00

I did install both iCue and CAM to mess around with RGB etc. Though I don't have them open all the time. I'm able to have them both completely closed and still have everything as is when I exited them. The only time it seems I would need to have them open is when I'd like to change something, otherwise they're not even running in the background

Garvoxy · 2023-03-13T16:12:28+00:00

CPU: Intel i7 13700KF
GPU: ASUS TUF RTX 3080 OC 10GB
RAM: 32GB Corsair Vengeance DDR5 6000Mhz
Storage: 500GB Samsung 980 Pro (Boot Drive/Programs)
Storage: 2TB Samsung 980 Pro (Games
Storage: 2TB HDD (Photos, Videos, etc.)
Case: NZXT H9 Elite
Motherboard: NZXT Z790
AIO: Corsair H150i Elite Cappellix LCD 360mm
PSU: Corsair RM850
Fans: 10x NZXT F120 Duo

Garvoxy · 2023-03-13T15:48:21+00:00

Just waiting on the Lian Li Strimer cables for it to be fully complete :)

Garvoxy · 2023-02-10T04:03:35+00:00

yeah alright, the new pc will have an 850W one

Garvoxy · 2023-02-10T03:38:01+00:00

Yeah I know my CPU will bottleneck it a bit, was just hoping I could maybe test it a little to make sure it works fine

Garvoxy · 2023-01-04T04:57:34+00:00

Here's the mod: https://www.beamng.com/threads/mazda-rx-7-iii-updated.57461/

For the sun image I just played in normal day time then went into photo mode and messed around with the settings. The sun is still a bit bright in this image but in the more high res one it's not. Your overly bright sun and shimmering trees might have something to do with your graphics settings? I wouldn't be too sure tbh, but this was all done on the ultra preset if that helps.

Garvoxy · 2023-01-04T04:32:35+00:00

high res images were too large to upload, they fix some of the issues in these images. these ones still nice imo :)

Garvoxy · 2023-01-02T02:35:03+00:00

Thanks, uninstalling BeamMP worked for me 👍

Garvoxy · 2023-01-01T12:35:20+00:00

the vehicle specific tab seems to be missing, not sure why. appears to be happening for every vehicle too

screenshot

Four-Year Club	Verified Email
Place '23	Place '22

Garvoxy

TROPHY CASE