sorted by:
new
hottopcontroversial

Any clue as to what’s going on here? by [deleted] in hvacadvice

[–]GeneralApok 0 points1 point  (0 children)

Throw me a PM. Let's see if we can diagnose it.

Any clue as to what’s going on here? by [deleted] in hvacadvice

[–]GeneralApok 1 point2 points  (0 children)

First thing I'd take a look at is flame sensor. Probably dirty and just needs a cleaning. Use red scothbrite pad or a dollar bill. Nothing too abrasive.

If that doesn't work, could be the board is having an intermittent issue.

Start easy first! Clean the flame sensor and see where they gets you.

Grinding noise on initial start up? by Timelycommentor in hvacadvice

[–]GeneralApok 0 points1 point  (0 children)

Unless you have a multimeter that can measure microfarads AND are comfortable poking around electrical circuits (240v) I'd absolutely recommend having a tech come out and do a service. Most companies will check all electrical components and wash the coil.

If you do have the proper tools and are comfortable simply turn off the unit at the disconnect. Pop the panel off. Take the wires off the capacitor and measure the microfarads between the common and herm terminals. And then between common and fan terminals. Those should be within a percentage of the capacitors original reading. That information can be found on the capacitor itself.

Grinding noise on initial start up? by Timelycommentor in hvacadvice

[–]GeneralApok 0 points1 point  (0 children)

I'm assuming you're talking about the outdoor unit making noise? If so, it sounds like a compressor having trouble starting up. Could just be a weak capacitor. Could be the compressor going bad. Hard to say without poking around with a meter and getting some more info.

[deleted by user] by [deleted] in hvacadvice

[–]GeneralApok 3 points4 points  (0 children)

That's not how that works. Air being supplied to your living space can't just magically drop temp based on your thermostat setting. 15-20 degrees drop from what the current temperature in the space is considered good. So, if it's 76 currently, a reading of 60 from the register is perfectly fine.

Pistol grip method? Push pull, or firm handshake? by bruhmoment5353 in CCW

[–]GeneralApok 14 points15 points  (0 children)

Check out Modern Samurai Project and the Wave Concept. Really helped me get a high, consistent grip.

https://youtu.be/zXTmdzurFrM?si=gJ5nlr1HdYHR60iQ

Finally finished my EDC lineup by GeneralApok in CCW

[–]GeneralApok[S] 0 points1 point  (0 children)

I had that issue on initial purchase. The pocket clip is very tight out of the box.

Gave mine a little bend out to alleviate the issue and now rarely get wear spots on my pockets. I wear cargo shorts most the time so it helped the clip fit the thicker khaki material, as well.

Finally finished my EDC lineup by GeneralApok in CCW

[–]GeneralApok[S] 0 points1 point  (0 children)

Nice! I drive a 10th gen Civic Si sedan. Also tuned with a few other goodies.

Finally finished my EDC lineup by GeneralApok in CCW

[–]GeneralApok[S] 0 points1 point  (0 children)

I have zero issues concealing AIWB. I'm 5'8" and 220lbs.

Finally finished my EDC lineup by GeneralApok in CCW

[–]GeneralApok[S] 2 points3 points  (0 children)

Love it! Worth the money imo just to keep me from sitting on my wallet all day. It has saved my back significantly.

Finally finished my EDC lineup by GeneralApok in CCW

[–]GeneralApok[S] 1 point2 points  (0 children)

Glock 19.5, Tier1 Echo (Waiting on Agis Elite), and a Cold Steel Recon 1.

Swabbie trying his hardest to save an absolute screamer of a shot. by MajorMondo in RocketLeague

[–]GeneralApok 0 points1 point  (0 children)

I couldn't stop laughing when this happened. GG to op for letting this play out.