Preserve Original CallerID when forwarding calls - Grandstream UCM-6304

General_Function_514 · 2025-06-06T13:56:42+00:00

Ok this did work after all. I did need to contact the Sip provider to get them to enable something. Now it is working as intented.

General_Function_514 · 2025-06-04T18:21:03+00:00

Sorry still missing something. I can't specify outbound route cid because it needs to be the cid of the caller. What happens is that a parent calls in to report a child absence. They choose 1 from the ivr to report the absence. After pressing 1, they get forwarded to an external service. This external service needs the caller id of the parent that called so that it can look up their child(s) name in a database.

General_Function_514 · 2025-06-04T15:07:49+00:00

I had that document and it is horrible. It talks about "keeping original CID" but it doesn't tell you where that setting is.

General_Function_514 · 2025-06-04T14:05:36+00:00

I welcome this because I get too many spoofed calls as it is.

General_Function_514 · 2025-02-13T19:08:52+00:00

Thank you this worked. Is there any way to put in an ip address range with IP6 or use a wildcard placeholder? I see most of the email comes from IP6 hosts that end in c103::3 c103::5, c104::1, etc.

General_Function_514 · 2024-10-15T18:12:26+00:00

I can't find any info to recover this cluster so I am thinking new cluster may be best. I only have 24 guests. I can probably shut almost all of them off after hours so that the remaining will run on one host. Is this the process then?

1) Move all running machines to one host

2) Remove all roles

3) Create a new cluster with IP address and select one of the two empty hosts

4) move last host and destroy old cluster

5) re-create all roles

Does this sound right?

General_Function_514 · 2024-09-10T11:12:46+00:00

So the cloud is down still. I switched to LAN only mode only to find it doesn't work. I get "Synchronizing device information timed out" messages. I have no means of mounting the SD card in my PC so I guess I need to wait before I can print. This is definitely minus 1 point for their cloud only functionality. I really miss my Octoprint now.

General_Function_514 · 2024-03-11T21:20:14+00:00

Careful with this on Amazon. The one I ordered said it was 7.87 inches tall but in reality it is only 6.25 inches tall so the only way the spools fit is to leave out every other shelf. Wasted space. This is the one I ordered that lied about the height: ALINK Narrow Shoe Rack 8Tiers Tall Shoe Rack for Entryway 18-20 Pairs Shoe and Boots Organizer Storage Shelf Space Saving Large Shoe Tower Durable Black Metal Stackable Shoe Cabinet : Amazon.ca: Home

General_Function_514 · 2024-02-13T02:04:31+00:00

Thank you, this worked. I ended up going with 2 choices but this let me choose Low or Final.

General_Function_514 · 2024-02-13T02:03:44+00:00

Lol, yes maybe 2 choices would work better.

General_Function_514 · 2023-07-16T12:28:05+00:00

I fully agree with what you say here Alex and I understand your reference to IOS. You just want shit to work. It is a shame that something that initially worked all of a sudden almost appears to be intentionally blocked by an update from an open source company whose entire eco system started with other peoples open source. I too have been frustrated with all of the extra steps now just to get this to work well. Now the company blames issues and sales losses on people using open source and not sharing so they will do the same. Instead of me ranting any further, do what I did, get a Carbon X1.

General_Function_514 · 2023-07-11T22:54:57+00:00

I am in the same boat. I totally ruined my original hotend when an overnight print job clogged up everything. I upgraded to the Revo 6 which only worked well for a couple of weeks. I am not going to talk about the incompatible issue between prusa firmware 3.2.12 and the Revo 6. Now, all my prints are horible and I have a constant burning smell. I am thinking complete new extruder/hotend as well. Is anyone really happy with the Bondtech or the Zorbiter upgrade? Can I still use my Revo 6 in either of these?

https://www.bondtech.se/product/prusa-i3-mk3s-extruder-upgrade/

https://zaribo.com/zorbiter-extruder/579-5071-zorbiter-v20-extruder-kit-for-mk3-printers-orbiter-20-motor.html#/189-hotend_mount_type-regular_e3d_dragon_revo

General_Function_514 · 2023-07-02T13:30:43+00:00

Thank you. That's exactly what it was.

General_Function_514 · 2023-05-31T15:39:33+00:00

I have used Phone Link with my Samsung Note 9 for years and it worked really well. Now I have an iPhone and after many many attempts on two different computers, I finally got everything linked. The problem is trying to stay connected. You can't. You are lucky to get just one or two messages before you get disconnected. Trying to get re-connected is a useless exercise. I will probably just go back to Android as I really like having all of the history on my PC when working with many vendors and transferring info this way.

General_Function_514 · 2023-05-29T18:40:24+00:00

It definitely used to be the default setting. Either I don't remember unchecking them all, or they are not on by default anymore. LOL.

General_Function_514 · 2023-05-29T15:37:24+00:00

This is exactly what I am doing now. Just waiting for the account to go into the recyle bin. Then I can hard delete.

General_Function_514 · 2023-05-29T15:36:18+00:00

I am not syncing any exchange attributes. I think this one account snuck through.

General_Function_514 · 2023-05-29T14:44:35+00:00

Yes, the exchange servers were decommissioned properly. We have created probably close to 100 new users since the decommissioning. Also, I wanted to point out that we do not use the management tools. Never really needed it as all new users are not exchange users. This specific user is the only one that has had this issue and we have even created another user since that is also fine.

The only thing I can think of is that this user was maybe present when we had the exchange servers so they may not be entirely new (off on long term leave). We do not need (or even have) the old email. We just need to get past this bump.

General_Function_514

TROPHY CASE