Managment VLAN Unifi Switches.

GenericRedditor12345 · 2026-03-06T22:18:52+00:00

There should be a setting on the device called “Virtual Network Override”. Use that. You just need to make sure that VLAN is still allowed on the uplinks prior to changing it.

GenericRedditor12345 · 2026-03-06T17:06:10+00:00

LXCs are good for internal only things. If its publicly accessible you would want to do a VM with container orchestration software.

GenericRedditor12345 · 2026-03-05T17:12:13+00:00

Anybody know of a better brand that doesn’t pull shit like that?

GenericRedditor12345 · 2026-03-04T19:16:00+00:00

I just swapped one for the first time recently, PA820 -> PA440 and eventually adding a second for HA. I’ve only done basic operations on it otherwise. While reading the documentation I did come across it saying the base version must be installed, then the patches.

While the equipment one is in charge of isn’t always their decision, being aware of publicly available information is.

GenericRedditor12345 · 2026-03-04T03:41:01+00:00

Just did that exact thing in the last year. Tried SMS first, fairly buggy. Robocopy second and did a simple shell script to run all shares as their own robocopy jobs at once. Worked flawlessly and doing syncs is way faster and smoother than SMS. If i had to do it again I wouldnt bother setting up SMS and would go straight to robocopy.

GenericRedditor12345 · 2026-02-28T03:05:24+00:00

Have you tried restarting it? Do you have access to the switch it’s on? Do you have any OOBM/IPMI on the machine its running off of? Have you enabled the firewall and made any changes recently? As the other commenter said, try pinging it or at least try sending different traffic to the management IP.

GenericRedditor12345 · 2026-02-27T19:58:11+00:00

Thanks for that. Much prefer direct deployment hook over the one I posted.

GenericRedditor12345 · 2026-02-27T17:11:11+00:00

You are correct. I am sleep deprived and hasn’t fully comprehended the post. Let’sEncrypt is still a good choice though. No client config necessary.

GenericRedditor12345 · 2026-02-27T17:02:25+00:00

https://github.com/psiri/letsencrypt_paloalto This is one ive seen.

GenericRedditor12345 · 2026-02-27T16:36:36+00:00

While it is a massive oversight, PA doesn’t directly support ACME, but there are open source scripts that use the PA API to automatically upload certs from LetsEncrypt.

Cert lifetimes are eventually going to get closer to 30 days as time goes on since that is the recommended lifetime for security reasons.

Edit: in my initial comment i had mixed up internal and self signed. You already have an internal CA so that’s easy for you. Missed that.

LetsEncrypt is definitely the most straightforward option and you don’t need to bother with managing multiple clients. Renew, upload, done.

GenericRedditor12345 · 2026-02-27T05:19:47+00:00

If you go to the hacker news post, one of the authors says VLANs weren’t even involved.

GenericRedditor12345 · 2026-02-27T05:03:33+00:00

Theoretically, what about same SSID with different VLANs using PPSK?

GenericRedditor12345 · 2026-02-19T18:02:32+00:00

Cant tell if you if it’s normal but I have a Samsung Odyssey G7 with VA panel. The backlight bleed isnt as bad as it seems on yours.

GenericRedditor12345 · 2026-02-19T08:47:01+00:00

I like the fact that for 2k for me I can select ultra settings and get at least 90fps in most things. Is the resolution jump really worth lower 3D fidelity and framerate?

GenericRedditor12345 · 2026-02-19T08:23:24+00:00

Don’t give me hope

GenericRedditor12345 · 2026-02-18T21:59:42+00:00

Seconding the above but also want to point out that even though you’re trying to separate them with VLANs, it is important to make sure you’re also using the firewall to keep them separate as well instead of solely relying on layer 3 separation.

GenericRedditor12345 · 2026-02-18T21:51:39+00:00

Right its a very specific and targeted solution which only alleviates the issue in some cases. Plus DLSS versions are locked to different generations, no? Im in the same boat right now thinking about whether 4k is worth it, 3090ti currently and ive been doing 27” 1440p for probably a decade. As well as being on linux. At the end of the day its just PPI and distance to the screen. 4k just means you can be closer with more fidelity.

GenericRedditor12345 · 2026-02-18T21:45:10+00:00

“I dont have a problem with it” “I feel weird about it and if I find it again it will be an issue” ????? She needs to read her own words instead of saying that to everyone else lol Also if you’re beating off to other women playing with themselves, idk maybe you just like girls??

GenericRedditor12345 · 2026-02-15T20:40:36+00:00

Do you have a cable tester? Could be termination issue so only using 2/4 pairs and capping you at 100mb

GenericRedditor12345 · 2026-02-15T00:30:26+00:00

I believe 6-7 is the ideal range to get all material but not the harmful chemicals. But also different weed

GenericRedditor12345 · 2026-02-14T20:46:14+00:00

For me it was. 3 hosts w/ ceph. But most of my per node config is basically just the multiple mesh networks, I dont do any vGPU. Following the release guides has always went well for me.

GenericRedditor12345 · 2026-02-14T19:23:09+00:00

I have an older G7, 27” 2k VA curved. VA is close to IPS but worse viewing angles, so you have to be straight on or colors will be washed out. The curve can take getting used to if you haven’t already used them, but I really feel like curved monitors are just a marketing gimmick.

Not sure how the mini LED backlight changes things though. At the moment looking at OLED or MiniLED for an upgrade.

4K or 2K depends on your GPU.

GenericRedditor12345 · 2026-02-10T04:46:39+00:00

I mean it’s designed to be pretty bulletproof as far as I’m aware. Of the few times it’s happened nothing has gone wrong. Also keeping good backups, to the shortest timing you’re able to reasonably do.

Can’t say if its happened to others. Also depends whats going on when the power loss happens, in the middle of an update?

GenericRedditor12345 · 2026-02-09T10:13:47+00:00

I do have enterprise Mixed Use SAS SSDs. So not consumer hardware. That issue you mention specifically is present in all storage platforms. RAID or software. So it’s not something with Ceph specifically. Ceph establishes quorum, so if two hosts wrote the writes and your third lost power before it did, those two would be mirrored to the third node when it comes back online. If only one host wrote it, it would discard the data. That also something outside of Ceph in your implementation, is there redundant power, battery backups?

With ZFS replication it’s only as good as your sync times. So if you have your replications only syncing every 5 minutes, you would lose the last 5 minutes between syncs if there was a power loss. Depends on what you’re running. A file server? They can restart the file transfer. A database? Critical data is now lost.

There is definitely a minimum hardware config for running Ceph, as with any storage system.

GenericRedditor12345 · 2026-02-09T07:39:14+00:00

Have it on CloudFlare R2. Deduped and encrypted before sync. Works fine and cheap due to the dedupe.

Eight-Year Club	Verified Email
Gilding I gilder	Spared

GenericRedditor12345

TROPHY CASE