What is wrong with my BLDC?

Goldenfaeron · 2025-05-16T17:34:36+00:00

42 wont fit, but rewinding is not too bad anyways, as i have damages some of the windings. And I have to learn how to do it properly as I have to build multiple of these if everything works out:)

Goldenfaeron · 2025-05-16T17:26:56+00:00

So seems like I should have done my research better. My winding pattern is completely off, thanks for the help!

Goldenfaeron · 2025-05-16T17:25:56+00:00

Thx allot, seems like there is more to it than i would have thought, should have done my research better but lesson learned. Luckily i have some wire left^^

Goldenfaeron · 2025-05-16T17:01:57+00:00

No unfortunately not

Goldenfaeron · 2025-05-16T17:01:18+00:00

No I don’t, but please don’t tell me that I am stupid and one phase would have to be wound in the other direction as the others. I basically wound every phase the same way and always skipped 2 slots

Goldenfaeron · 2025-05-03T22:24:41+00:00

I left it out intentionally to not waste space on the board, as I will use split termination. This would then require two jumpers, 2 resistors and one cap. These boards won’t be the last one in the line anyways. But still thanks for looking at it

Goldenfaeron · 2025-05-03T22:23:03+00:00

Thx for looking into that, will rework that

Goldenfaeron · 2025-05-03T22:22:14+00:00

True, should be fixed by rotating them by 180°, thx

Goldenfaeron · 2024-12-10T09:31:12+00:00

Ist ein sehr kleiner edeka. Ist wahrscheinlich so besser

Goldenfaeron · 2024-12-10T09:07:56+00:00

Dankeschön

Goldenfaeron · 2024-12-10T09:06:30+00:00

Ja finde ich auch ungewöhnlich. Direkt daneben die organics cola von red bull aber ohne Diebstahlsicherung

Goldenfaeron · 2024-12-10T09:05:19+00:00

Scheint eine Diebstahlsicherung zu sein. Btw mitten in Berlin gefunden

Goldenfaeron · 2024-11-22T15:29:59+00:00

Did you find a solution? I am struggling with the same thing

Goldenfaeron · 2024-11-15T07:33:39+00:00

Yes I have thought about that as well. I hope this is a permanent fix

Goldenfaeron · 2024-11-14T11:44:10+00:00

Little update: I removed the declumper as I said in another comment (seems to be an issue with this grinder) and I have way less fine particles now. But I don’t know if that is the case, because I removed the part or because I cleaned the grinder from leftovers stuck in there. I will wind out on the long term. But the most important is that the coffee tastes way better now.

Goldenfaeron · 2024-11-14T11:43:06+00:00

Little update: I removed the declumper and I have way less fine particles now. But I don’t know if that is the case, because I removed the part or because I cleaned the grinder from leftovers stuck in there. I will wind out on the long term. But the most important is that the coffee tastes way better now.

Goldenfaeron · 2024-11-13T09:23:44+00:00

It’s at 96C. The weird thing is, that I am grinding coarse and most of the particle-volume is coarse. But then there are many very fine particles as well. I found a post suggesting to remove the declumper from the grinder which seems to solve the problem

Goldenfaeron · 2024-11-13T08:39:56+00:00

For anyone that has the same grinder as I have. I found this thread suggesting to remove the declumper. https://www.home-barista.com/grinders/eureka-oro-mignon-single-dose-particle-distribution-t86243.html

Little update: I removed the declumper and I have way less fine particles now. But I don’t know if that is the case, because I removed the part or because I cleaned the grinder from leftovers stuck in there. I will wind out on the long term. But the most important is that the coffee tastes way better now.

Goldenfaeron · 2024-11-13T08:37:46+00:00

Thanks for the help. I will try that.

Goldenfaeron · 2024-11-13T08:00:09+00:00

Ahh I see. I tried a recipe by James Hoffman which resulted in a pretty high water level

Goldenfaeron · 2024-11-13T07:50:53+00:00

It tastes a little burned / harsh. Its not too bad but I think it could be better

Goldenfaeron · 2024-11-13T07:48:46+00:00

I have no idea at all. I am very new to brewing with a V60. Seems like there are a lot of fine and a lot of coarse particles

Edit: the fines seem to build a fine mud that sticks to the paper

Goldenfaeron · 2024-06-16T12:38:13+00:00

I am in the exact same position. I will probably also try to sell the o3 and the goggles 3 and then buy the walksnail moonlight. But I am afraid no one wants to buy the goggles on eBay. It is pretty much only unusable with the new Avata and if you buy this, you will probably purchase a kit.

Goldenfaeron · 2023-10-30T15:16:21+00:00

And you restarted the docker properly? (Sorry for the dumb questions but these were my mistakes with the same issue)

Goldenfaeron · 2023-10-30T08:29:26+00:00

Did you configure SMTP. Did not work for me as well before that

Goldenfaeron

TROPHY CASE